lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221105145939.20318-14-johan+linaro@kernel.org>
Date:   Sat,  5 Nov 2022 15:59:36 +0100
From:   Johan Hovold <johan+linaro@...nel.org>
To:     Vinod Koul <vkoul@...nel.org>
Cc:     Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Johan Hovold <johan+linaro@...nel.org>,
        Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Subject: [PATCH v5 13/16] phy: qcom-qmp-pcie: fix initialisation reset

Add the missing delay after asserting reset. This is specifically needed
for the reset to have any effect on SC8280XP.

The vendor driver uses a 1 ms delay, but that seems a bit excessive.
Instead use a 200 us delay which appears to be more than enough and also
matches the UFS reset delay added by commit 870b1279c7a0 ("scsi:
ufs-qcom: Add reset control support for host controller").

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
 drivers/phy/qualcomm/phy-qcom-qmp-pcie.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
index 8af84ff755ab..06844552922e 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-pcie.c
@@ -1866,6 +1866,8 @@ static int qmp_pcie_init(struct phy *phy)
 		goto err_disable_regulators;
 	}
 
+	usleep_range(200, 300);
+
 	ret = reset_control_bulk_deassert(cfg->num_resets, qmp->resets);
 	if (ret) {
 		dev_err(qmp->dev, "reset deassert failed\n");
-- 
2.37.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ