| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221107185931.22075-2-krzysztof.kozlowski@linaro.org>
Date: Mon, 7 Nov 2022 19:59:31 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 2/2] ARM: dts: qcom-apq8060: align TLMM pin configuration with DT schema
DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
.../arm/boot/dts/qcom-apq8060-dragonboard.dts | 126 +++++++-----------
1 file changed, 51 insertions(+), 75 deletions(-)
diff --git a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
index 0baf202a82ba..7a4c59e04af6 100644
--- a/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
+++ b/arch/arm/boot/dts/qcom-apq8060-dragonboard.dts
@@ -789,28 +789,24 @@ &sdcc5 {
&tlmm {
/* eMMC pins, all 8 data lines connected */
- dragon_sdcc1_pins: sdcc1 {
- mux {
- pins = "gpio159", "gpio160", "gpio161",
- "gpio162", "gpio163", "gpio164",
- "gpio165", "gpio166", "gpio167",
- "gpio168";
- function = "sdc1";
- };
- clk {
+ dragon_sdcc1_pins: sdcc1-state {
+ clk-pins {
pins = "gpio167"; /* SDC1 CLK */
+ function = "sdc1";
drive-strength = <16>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "gpio168"; /* SDC1 CMD */
+ function = "sdc1";
drive-strength = <10>;
bias-pull-up;
};
- data {
+ data-pins {
/* SDC1 D0 to D7 */
pins = "gpio159", "gpio160", "gpio161", "gpio162",
"gpio163", "gpio164", "gpio165", "gpio166";
+ function = "sdc1";
drive-strength = <10>;
bias-pull-up;
};
@@ -820,18 +816,18 @@ data {
* The SDCC3 pins are hardcoded (non-muxable) but need some pin
* configuration.
*/
- dragon_sdcc3_pins: sdcc3 {
- clk {
+ dragon_sdcc3_pins: sdcc3-state {
+ clk-pins {
pins = "sdc3_clk";
drive-strength = <8>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "sdc3_cmd";
drive-strength = <8>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "sdc3_data";
drive-strength = <8>;
bias-pull-up;
@@ -839,101 +835,82 @@ data {
};
/* Second SD card slot pins */
- dragon_sdcc5_pins: sdcc5 {
- mux {
- pins = "gpio95", "gpio96", "gpio97",
- "gpio98", "gpio99", "gpio100";
- function = "sdc5";
- };
- clk {
+ dragon_sdcc5_pins: sdcc5-state {
+ clk-pins {
pins = "gpio97"; /* SDC5 CLK */
+ function = "sdc5";
drive-strength = <16>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "gpio95"; /* SDC5 CMD */
+ function = "sdc5";
drive-strength = <10>;
bias-pull-up;
};
- data {
+ data-pins {
/* SDC5 D0 to D3 */
pins = "gpio96", "gpio98", "gpio99", "gpio100";
+ function = "sdc5";
drive-strength = <10>;
bias-pull-up;
};
};
- dragon_gsbi3_i2c_pins: gsbi3_i2c {
- mux {
- pins = "gpio43", "gpio44";
- function = "gsbi3";
- };
- pinconf {
- pins = "gpio43", "gpio44";
- drive-strength = <8>;
- /* These have external pull-up 2.2kOhm to 1.8V */
- bias-disable;
- };
+ dragon_gsbi3_i2c_pins: gsbi3-i2c-state {
+ pins = "gpio43", "gpio44";
+ function = "gsbi3";
+ drive-strength = <8>;
+ /* These have external pull-up 2.2kOhm to 1.8V */
+ bias-disable;
};
- dragon_gsbi8_i2c_pins: gsbi8_i2c {
- mux {
- pins = "gpio64", "gpio65";
- function = "gsbi8";
- };
- pinconf {
- pins = "gpio64", "gpio65";
- drive-strength = <16>;
- /* These have external pull-up 2.2kOhm to 1.8V */
- bias-disable;
- };
+ dragon_gsbi8_i2c_pins: gsbi8-i2c-state {
+ pins = "gpio64", "gpio65";
+ function = "gsbi8";
+ drive-strength = <16>;
+ /* These have external pull-up 2.2kOhm to 1.8V */
+ bias-disable;
};
- dragon_gsbi12_i2c_pins: gsbi12_i2c {
- mux {
- pins = "gpio115", "gpio116";
- function = "gsbi12";
- };
- pinconf {
- pins = "gpio115", "gpio116";
- drive-strength = <16>;
- /* These have external pull-up 4.7kOhm to 1.8V */
- bias-disable;
- };
+ dragon_gsbi12_i2c_pins: gsbi12-i2c-state {
+ pins = "gpio115", "gpio116";
+ function = "gsbi12";
+ drive-strength = <16>;
+ /* These have external pull-up 4.7kOhm to 1.8V */
+ bias-disable;
};
/* Primary serial port uart 0 pins */
- dragon_gsbi12_serial_pins: gsbi12_serial {
- mux {
- pins = "gpio117", "gpio118";
- function = "gsbi12";
- };
- tx {
+ dragon_gsbi12_serial_pins: gsbi12-serial-state {
+ tx-pins {
pins = "gpio117";
+ function = "gsbi12";
drive-strength = <8>;
bias-disable;
};
- rx {
+ rx-pins {
pins = "gpio118";
+ function = "gsbi12";
drive-strength = <2>;
bias-pull-up;
};
};
- dragon_ebi2_pins: ebi2 {
+ dragon_ebi2_pins: ebi2-state {
/*
* Pins used by EBI2 on the Dragonboard, actually only
* CS2 is used by a real peripheral. CS0 is just
* routed to a test point.
*/
- mux0 {
+ mux0-pins {
pins =
/* "gpio39", CS1A_N this is not good to mux */
"gpio40", /* CS2A_N */
"gpio134"; /* CS0_N testpoint TP29 */
function = "ebi2cs";
};
- mux1 {
+ mux1-pins {
pins =
/* EBI2_ADDR_7 downto EBI2_ADDR_0 address bus */
"gpio123", "gpio124", "gpio125", "gpio126",
@@ -951,22 +928,21 @@ mux1 {
};
/* Interrupt line for the KXSD9 accelerometer */
- dragon_kxsd9_gpios: kxsd9 {
- irq {
- pins = "gpio57"; /* IRQ line */
- bias-pull-up;
- };
+ dragon_kxsd9_gpios: kxsd9-state {
+ pins = "gpio57"; /* IRQ line */
+ function = "gpio";
+ bias-pull-up;
};
- dragon_tma340_gpios: tma340 {
- reset {
+ dragon_tma340_gpios: tma340-state {
+ reset-pins {
/* RESET line, TS_ATTN, WAKE_CTP */
pins = "gpio58";
function = "gpio";
drive-strength = <6>;
bias-disable;
};
- irq {
+ irq-pins {
pins = "gpio61"; /* IRQ line */
function = "gpio";
drive-strength = <2>;
--
2.34.1
Powered by blists - more mailing lists