linux-kernel - Re: [PATCH 2/3] arm64: dts: qcom: hk10: use GPIO flags for tlmm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <8dcc223d-48ab-f11d-5cc3-7fe129b9186d@linaro.org>
Date:   Mon, 7 Nov 2022 10:58:24 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Robert Marko <robimarko@...il.com>, agross@...nel.org,
        andersson@...nel.org, robh+dt@...nel.org,
        krzysztof.kozlowski+dt@...aro.org, linux-arm-msm@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 2/3] arm64: dts: qcom: hk10: use GPIO flags for tlmm



On 07/11/2022 10:29, Robert Marko wrote:
> Use respective GPIO_ACTIVE_LOW/HIGH flags for tlmm GPIOs instead of
> harcoding the cell value.
> 
> Signed-off-by: Robert Marko <robimarko@...il.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

KOnrad
>   arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi | 5 +++--
>   1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> index 262b937e0bc6..651a231554e0 100644
> --- a/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq8074-hk10.dtsi
> @@ -5,6 +5,7 @@
>   /dts-v1/;
>   
>   #include "ipq8074.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
>   
>   / {
>   	aliases {
> @@ -39,12 +40,12 @@ &blsp1_uart5 {
>   
>   &pcie0 {
>   	status = "okay";
> -	perst-gpios = <&tlmm 58 0x1>;
> +	perst-gpios = <&tlmm 58 GPIO_ACTIVE_LOW>;
>   };
>   
>   &pcie1 {
>   	status = "okay";
> -	perst-gpios = <&tlmm 61 0x1>;
> +	perst-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
>   };
>   
>   &pcie_phy0 {