[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <Y2j41epn0FTT2Asb@hovoldconsulting.com>
Date: Mon, 7 Nov 2022 13:23:49 +0100
From: Johan Hovold <johan@...nel.org>
To: Brian Masney <bmasney@...hat.com>
Cc: Johan Hovold <johan+linaro@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Andy Gross <agross@...nel.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shazad Hussain <quic_shazhuss@...cinc.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, stable@...r.kernel.org
Subject: Re: [PATCH 1/2] arm64: dts: qcom: sc8280xp: fix UFS reference clocks
On Mon, Nov 07, 2022 at 06:09:12AM -0500, Brian Masney wrote:
> On Fri, Nov 04, 2022 at 10:20:44AM +0100, Johan Hovold wrote:
> > There are three UFS reference clocks on SC8280XP which are used as
> > follows:
> >
> > - The GCC_UFS_REF_CLKREF_CLK clock is fed to any UFS device connected
> > to either controller.
> >
> > - The GCC_UFS_1_CARD_CLKREF_CLK and GCC_UFS_CARD_CLKREF_CLK clocks
> > provide reference clocks to the two PHYs.
> >
> > Note that this depends on first updating the clock driver to reflect
> > that all three clocks are sourced from CXO. Specifically, the UFS
> > controller driver expects the device reference clock to have a valid
> > frequency:
> >
> > ufshcd-qcom 1d84000.ufs: invalid ref_clk setting = 0
> >
> > Fixes: 152d1faf1e2f ("arm64: dts: qcom: add SC8280XP platform")
> > Fixes: 8d6b458ce6e9 ("arm64: dts: qcom: sc8280xp: fix ufs_card_phy ref clock")
> > Fixes: f3aa975e230e ("arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phy")
> > Link: https://lore.kernel.org/lkml/Y2OEjNAPXg5BfOxH@hovoldconsulting.com/
> > Cc: stable@...r.kernel.org # 5.20
> > Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
>
> Reviewed-by: Brian Masney <bmasney@...hat.com>
>
> Note that there was no 5.20 kernel; that should be 6.0. Bjorn should be
> able to fix this up during merge.
Good catch. I based this on a tag created before 6.0 was released and
failed to notice.
Johan
Powered by blists - more mailing lists