[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <bcf9fd32-1078-2c7f-0c2a-5848ac6571e8@opensynergy.com>
Date: Tue, 8 Nov 2022 20:22:25 +0100
From: Harald Mommer <hmo@...nsynergy.com>
To: Vincent Mailhol <vincent.mailhol@...il.com>,
Harald Mommer <Harald.Mommer@...nsynergy.com>
Cc: virtio-dev@...ts.oasis-open.org, linux-can@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Wolfgang Grandegger <wg@...ndegger.com>,
Marc Kleine-Budde <mkl@...gutronix.de>,
"David S . Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>,
Dariusz Stojaczyk <Dariusz.Stojaczyk@...nsynergy.com>
Subject: Re: [RFC PATCH v2 2/2] can: virtio: Add virtio_can to MAINTAINERS
file.
Hello Vincent,
sorry, my mistake, got it. I was absolutely convinced that commit 1 only
contained the code changes and commit 2 only contained the maintainers
file. But this is not the case, there was a last minute change and then
I did it wrong in git.
Regards
Harald
On 08.11.22 20:13, Harald Mommer wrote:
> Hello Vincent,
>
> what I see here are places from v1 which should be now obsolete and of
> no further interest. There was a patch v1, this has been reworked and
> now comes v2 which supersedes v1. Squashing is something I could do if
> I had 2 commits which should be joined together but here is probably
> not meant to squash the virtio_can.[ch] code file commit with the
> MAINTAINERS file commit.
>
> Could be that I misunderstood the way how is worked with patches on
> the mailing lists, don't know. I do absolutely not understand what you
> mean here.
>
> Regards
> Harald
>
> On 05.11.22 11:14, Vincent Mailhol wrote:
>> On Sat. 5 Nov. 2022 at 02:29, Harald Mommer
>> <Harald.Mommer@...nsynergy.com> wrote:
>>> From: Harald Mommer <harald.mommer@...nsynergy.com>
>>>
>>> Signed-off-by: Harald Mommer <Harald.Mommer@...nsynergy.com>
>>> ---
>>> MAINTAINERS | 7 +++++++
>>> drivers/net/can/virtio_can.c | 6 ++----
>>> 2 files changed, 9 insertions(+), 4 deletions(-)
>>>
>>> diff --git a/MAINTAINERS b/MAINTAINERS
>>> index 379945f82a64..01b2738b7c16 100644
>>> --- a/MAINTAINERS
>>> +++ b/MAINTAINERS
>>> @@ -21692,6 +21692,13 @@ F: drivers/vhost/scsi.c
>>> F: include/uapi/linux/virtio_blk.h
>>> F: include/uapi/linux/virtio_scsi.h
>>>
>>> +VIRTIO CAN DRIVER
>>> +M: "Harald Mommer" <harald.mommer@...nsynergy.com>
>>> +L: linux-can@...r.kernel.org
>>> +S: Maintained
>>> +F: drivers/net/can/virtio_can.c
>>> +F: include/uapi/linux/virtio_can.h
>>> +
>>> VIRTIO CONSOLE DRIVER
>>> M: Amit Shah <amit@...nel.org>
>>> L: virtualization@...ts.linux-foundation.org
>>> diff --git a/drivers/net/can/virtio_can.c
>>> b/drivers/net/can/virtio_can.c
>>> index 43cf1c9e4afd..0e87172bbddf 100644
>>> --- a/drivers/net/can/virtio_can.c
>>> +++ b/drivers/net/can/virtio_can.c
>>> @@ -1,7 +1,7 @@
>>> -// SPDX-License-Identifier: GPL-2.0+
>>> +// SPDX-License-Identifier: GPL-2.0-only
>> Please squash this in the previous patch.
>>
>>> /*
>>> * CAN bus driver for the Virtio CAN controller
>>> - * Copyright (C) 2021 OpenSynergy GmbH
>>> + * Copyright (C) 2021-2022 OpenSynergy GmbH
>> Same.
>>
>>> */
>>>
>>> #include <linux/atomic.h>
>>> @@ -793,8 +793,6 @@ static void virtio_can_populate_vqs(struct
>>> virtio_device *vdev)
>>> unsigned int idx;
>>> int ret;
>>>
>>> - // TODO: Think again a moment if here locks already may be
>>> needed!
>> Same.
>>
>>> /* Fill RX queue */
>>> vq = priv->vqs[VIRTIO_CAN_QUEUE_RX];
>>> for (idx = 0u; idx < ARRAY_SIZE(priv->rpkt); idx++) {
>>> --
>>> 2.17.1
>>>
--
Dipl.-Ing. Harald Mommer
Senior Software Engineer
OpenSynergy GmbH
Rotherstr. 20, 10245 Berlin
Phone: +49 (30) 60 98 540-0 <== Zentrale
Fax: +49 (30) 60 98 540-99
E-Mail: harald.mommer@...nsynergy.com
www.opensynergy.com
Handelsregister: Amtsgericht Charlottenburg, HRB 108616B
Geschäftsführer/Managing Director: Regis Adjamah
Powered by blists - more mailing lists