[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CACRpkdbCxW7yPKnMTFDsUhCH2LHja6Pf1GpbdmqhDMqLA28aRg@mail.gmail.com>
Date: Tue, 8 Nov 2022 11:28:06 +0100
From: Linus Walleij <linus.walleij@...aro.org>
To: Shenwei Wang <shenwei.wang@....com>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Bartosz Golaszewski <brgl@...ev.pl>,
Dong Aisheng <aisheng.dong@....com>,
Jacky Bai <ping.bai@....com>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Peng Fan <peng.fan@....com>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev
Subject: Re: [PATCH v4 0/5] gpio: add suspend/resume support for i.mx8x SoCs
On Thu, Oct 27, 2022 at 3:09 PM Shenwei Wang <shenwei.wang@....com> wrote:
> On i.MX8QM/QXP/DXL SoCs, even a GPIO is selected as the wakeup source,
> the GPIO block will be powered off when system enters into suspend
> state. This can greatly reduce the power consumption of suspend state
> because the whole partition can be shutdown. This is called PAD wakeup
> feature on i.MX8x platform.
>
> This series of patches enable this wakeup feature on i.MX8QM/QXP/DXL
> platforms.
First: thanks a lot for fixing this the way I wanted it!
> Shenwei Wang (5):
> arm64: dts: imx8dxl-ss-lsio: add gpio-ranges property
> arm64: dts: imx8qm-ss-lsio: add gpio-ranges property
> arm64: dts: imx8qxp-ss-lsio: add gpio-ranges property
Please push these into the SoC tree for i.MX.
> pinctrl: freescale: add pad wakeup config
> gpio: mxc: enable pad wakeup on i.MX8x platforms
I have applied these two to the pinctrl tree.
Yours,
Linus Walleij
Powered by blists - more mailing lists