[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <DM6PR04MB65752A74C80DCB1FD3EC3ABCFC3E9@DM6PR04MB6575.namprd04.prod.outlook.com>
Date: Wed, 9 Nov 2022 08:07:28 +0000
From: Avri Altman <Avri.Altman@....com>
To: Bean Huo <beanhuo@...pp.de>,
"alim.akhtar@...sung.com" <alim.akhtar@...sung.com>,
"jejb@...ux.ibm.com" <jejb@...ux.ibm.com>,
"martin.petersen@...cle.com" <martin.petersen@...cle.com>,
"stanley.chu@...iatek.com" <stanley.chu@...iatek.com>,
"beanhuo@...ron.com" <beanhuo@...ron.com>,
"bvanassche@....org" <bvanassche@....org>,
"tomas.winkler@...el.com" <tomas.winkler@...el.com>,
"daejun7.park@...sung.com" <daejun7.park@...sung.com>,
"quic_cang@...cinc.com" <quic_cang@...cinc.com>,
"quic_nguyenb@...cinc.com" <quic_nguyenb@...cinc.com>,
"quic_xiaosenh@...cinc.com" <quic_xiaosenh@...cinc.com>,
"quic_richardp@...cinc.com" <quic_richardp@...cinc.com>,
"quic_asutoshd@...cinc.com" <quic_asutoshd@...cinc.com>,
"hare@...e.de" <hare@...e.de>
CC: "linux-scsi@...r.kernel.org" <linux-scsi@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: RE: [RFC PATCH v1 2/2] ufs: core: Add advanced RPMB support in
ufs_bsg
>
> Add advanced RPMB support in ufs_bsg. For these reasons, we try to
> implement Advanced RPMB in ufs_bsg:
>
> 1. According to the UFS specification, only one RPMB operation can be
> performed at any time. We can ensure this by using reserved slot and its
> dev_cmd sync operation protection mechanism.
>
> 2. Fort the Advanced RPMB, RPMB metadata is packaged in an EHS (to device)
For the
> of the UPIU, and the corresponding reply EHS (from the device) should also be
Maybe: of a *command* UPIU
And even refer to an implementation in, e.g. ufs-utils
> returned to the user space. bsg_job->reuqest and bsg_job->reply allow us to
> pass and return EHS from/back to userspace.
>
> Compared to normal/legacy RPMB, the advantage of advanced RPMB are:
>
> 1. The data length in the RPBM data read/write command could be > 4KB. For
> the legacy RPMB, the data length in a single RPMB data transfer is 256 bytes.
> 2. All of the advanced RPMB operations will be a single command shot. but for
> the legacy RPBM, take the read write-counter value as an example, you need
> two commands(first SECURITY PROTOCOL OUT, then the second SECURITY
> PROTOCOL IN)
>
> Signed-off-by: Bean Huo <beanhuo@...pp.de>
> ---
> drivers/ufs/core/ufs_bsg.c | 115 +++++++++++++---------
> drivers/ufs/core/ufshcd.c | 157 ++++++++++++++++++++++++-------
> include/uapi/scsi/scsi_bsg_ufs.h | 30 +++++-
> include/ufs/ufshcd.h | 5 +
> 4 files changed, 226 insertions(+), 81 deletions(-)
>
> diff --git a/drivers/ufs/core/ufs_bsg.c b/drivers/ufs/core/ufs_bsg.c index
> b99e3f3dc4ef..6c6a27ad49d5 100644
> --- a/drivers/ufs/core/ufs_bsg.c
> +++ b/drivers/ufs/core/ufs_bsg.c
> @@ -8,8 +8,10 @@
> #include <linux/bsg-lib.h>
> #include <scsi/scsi.h>
> #include <scsi/scsi_host.h>
> -#include "ufs_bsg.h"
> +#include <linux/dma-mapping.h>
> #include <ufs/ufshcd.h>
> +
> +#include "ufs_bsg.h"
> #include "ufshcd-priv.h"
>
> static int ufs_bsg_get_query_desc_size(struct ufs_hba *hba, int *desc_len, @@
> -30,21 +32,6 @@ static int ufs_bsg_get_query_desc_size(struct ufs_hba *hba,
> int *desc_len,
> return 0;
> }
>
> -static int ufs_bsg_verify_query_size(struct ufs_hba *hba,
> - unsigned int request_len,
> - unsigned int reply_len)
> -{
> - int min_req_len = sizeof(struct ufs_bsg_request);
> - int min_rsp_len = sizeof(struct ufs_bsg_reply);
> -
> - if (min_req_len > request_len || min_rsp_len > reply_len) {
> - dev_err(hba->dev, "not enough space assigned\n");
> - return -EINVAL;
> - }
> -
> - return 0;
> -}
Maybe put this in a separate cleanup patch?
> -
> static int ufs_bsg_alloc_desc_buffer(struct ufs_hba *hba, struct bsg_job *job,
> uint8_t **desc_buff, int *desc_len,
> enum query_opcode desc_op) @@ -83,23 +70,53 @@
> static int ufs_bsg_alloc_desc_buffer(struct ufs_hba *hba, struct bsg_job *job,
> return 0;
> }
>
> +static int ufshcd_exec_advanced_rpmb_req(struct ufs_hba *hba, struct
ufs_bsg_exec_advanced_rpmb_req
> bsg_job *job,
> + struct bsg_buffer *bbuf, int
> +msgcode, int len) {
> + struct ufs_rpmb_request *rpmb_request = job->request;
> + struct ufs_rpmb_reply *rpmb_reply = job->reply;
> + enum dma_data_direction dir = DMA_NONE;
> + int mapped_sg_cnt;
> + int ret;
> +
> + if (hba->ufs_version < ufshci_version(4, 0) || !hba-
> >dev_info.b_advanced_rpmb_en)
> + return -EINVAL;
I think you also need that EHSLUTRDS is 1
> +
> + if (msgcode == UPIU_TRANSACTION_ARPMB_DATA_WRITE)
> + dir = DMA_TO_DEVICE;
> + else if (msgcode == UPIU_TRANSACTION_ARPMB_DATA_READ)
> + dir = DMA_FROM_DEVICE;
> +
> + if (dir != DMA_NONE && bbuf->sg_cnt) {
> + mapped_sg_cnt = dma_map_sg(hba->host->dma_dev, bbuf->sg_list,
> bbuf->sg_cnt, dir);
> + if (unlikely(!mapped_sg_cnt))
> + return -ENOMEM;
> + }
> +
> + ret = ufshcd_advanced_rpmb_req_handler(hba, &rpmb_request-
> >bsg_request.upiu_req,
> + &rpmb_reply->bsg_reply.upiu_rsp, &rpmb_request-
> >ehs_req,
> + &rpmb_reply->ehs_rsp, mapped_sg_cnt, bbuf->sg_list,
> + dir, len);
> +
> + if (dir != DMA_NONE && bbuf->sg_cnt)
> + dma_unmap_sg(hba->host->dma_dev, bbuf->sg_list,
> + bbuf->sg_cnt, dir);
> +
> + return ret;
> +}
> +
> static int ufs_bsg_request(struct bsg_job *job) {
> struct ufs_bsg_request *bsg_request = job->request;
> struct ufs_bsg_reply *bsg_reply = job->reply;
> struct ufs_hba *hba = shost_priv(dev_to_shost(job->dev->parent));
> - unsigned int req_len = job->request_len;
> - unsigned int reply_len = job->reply_len;
> struct uic_command uc = {};
> int msgcode;
> - uint8_t *desc_buff = NULL;
> + uint8_t *buff = NULL;
> int desc_len = 0;
> enum query_opcode desc_op = UPIU_QUERY_OPCODE_NOP;
> int ret;
> -
> - ret = ufs_bsg_verify_query_size(hba, req_len, reply_len);
> - if (ret)
> - goto out;
> + struct bsg_buffer *bbuf = NULL;
> + bool rpmb = false;
>
> bsg_reply->reply_payload_rcv_len = 0;
>
> @@ -109,34 +126,52 @@ static int ufs_bsg_request(struct bsg_job *job)
> switch (msgcode) {
> case UPIU_TRANSACTION_QUERY_REQ:
> desc_op = bsg_request->upiu_req.qr.opcode;
> - ret = ufs_bsg_alloc_desc_buffer(hba, job, &desc_buff,
> + ret = ufs_bsg_alloc_desc_buffer(hba, job, &buff,
> &desc_len, desc_op);
> - if (ret) {
> - ufshcd_rpm_put_sync(hba);
> + if (ret)
> goto out;
> - }
>
> fallthrough;
> case UPIU_TRANSACTION_NOP_OUT:
> case UPIU_TRANSACTION_TASK_REQ:
> ret = ufshcd_exec_raw_upiu_cmd(hba, &bsg_request->upiu_req,
> &bsg_reply->upiu_rsp, msgcode,
> - desc_buff, &desc_len, desc_op);
> + buff, &desc_len,
> + desc_op);
> if (ret)
> - dev_err(hba->dev,
> - "exe raw upiu: error code %d\n", ret);
> + dev_err(hba->dev, "exe raw upiu: error code %d\n", ret);
> + else if (desc_op == UPIU_QUERY_OPCODE_READ_DESC &&
> desc_len)
> + bsg_reply->reply_payload_rcv_len =
> + sg_copy_from_buffer(job->request_payload.sg_list,
> +
> + job->request_payload.sg_cnt, buff, desc_len);
This part can go into that cleanup patch as well
>
> break;
> case UPIU_TRANSACTION_UIC_CMD:
> memcpy(&uc, &bsg_request->upiu_req.uc, UIC_CMD_SIZE);
> ret = ufshcd_send_uic_cmd(hba, &uc);
> if (ret)
> - dev_err(hba->dev,
> - "send uic cmd: error code %d\n", ret);
> + dev_err(hba->dev, "send uic cmd: error code
> + %d\n", ret);
>
> memcpy(&bsg_reply->upiu_rsp.uc, &uc, UIC_CMD_SIZE);
>
> break;
> + case UPIU_TRANSACTION_ARPMB_DATA_READ:
> + case UPIU_TRANSACTION_ARPMB_DATA_WRITE:
> + if (!job->request_payload.payload_len || job-
> >request_payload.payload_len > 4096) {
Isn't the payload can be integer number of 4K up to bRPMB_ReadWriteSize?
> + ret = -EINVAL;
> + goto out;
> + }
> + bbuf = &job->request_payload;
> + fallthrough;
> + case UPIU_TRANSACTION_ARPMB_PROGRAM_KEY:
> + case UPIU_TRANSACTION_ARPMB_READ_COUNTER:
Read counter payload is don't care, but program key payload should be 0 - see table 12.21
Also, there are 9 types of rpmb operations - where are all the rest?
> + rpmb = true;
> + ret = ufshcd_exec_advanced_rpmb_req(hba, job, bbuf, msgcode,
> + job->request_payload.payload_len);
> + if (ret)
> + dev_err(hba->dev, "RPMB OP failed: error code %d\n", ret);
> + else if (msgcode == UPIU_TRANSACTION_ARPMB_READ_COUNTER)
> + bsg_reply->reply_payload_rcv_len = job-
> >request_payload.payload_len;
> + break;
> default:
> ret = -ENOTSUPP;
> dev_err(hba->dev, "unsupported msgcode 0x%x\n", msgcode); @@ -
> 144,22 +179,12 @@ static int ufs_bsg_request(struct bsg_job *job)
> break;
> }
>
> +out:
> ufshcd_rpm_put_sync(hba);
> + kfree(buff);
>
> - if (!desc_buff)
> - goto out;
> -
> - if (desc_op == UPIU_QUERY_OPCODE_READ_DESC && desc_len)
> - bsg_reply->reply_payload_rcv_len =
> - sg_copy_from_buffer(job->request_payload.sg_list,
> - job->request_payload.sg_cnt,
> - desc_buff, desc_len);
> -
> - kfree(desc_buff);
> -
> -out:
> bsg_reply->result = ret;
> - job->reply_len = sizeof(struct ufs_bsg_reply);
> + job->reply_len = !rpmb ? sizeof(struct ufs_bsg_reply) :
> + sizeof(struct ufs_rpmb_reply);
> /* complete the job here only if no error */
> if (ret == 0)
> bsg_job_done(job, ret, bsg_reply->reply_payload_rcv_len);
> diff --git a/drivers/ufs/core/ufshcd.c b/drivers/ufs/core/ufshcd.c index
> d49e7a0b82ca..592ee3809c16 100644
> --- a/drivers/ufs/core/ufshcd.c
> +++ b/drivers/ufs/core/ufshcd.c
> @@ -56,6 +56,9 @@
> /* Query request timeout */
> #define QUERY_REQ_TIMEOUT 1500 /* 1.5 seconds */
>
> +/* Advanced RPMB request timeout */
> +#define ADVANCED_RPMB_REQ_TIMEOUT 4500 /* 3 seconds */
4.5 seconds
> +
> /* Task management command timeout */
> #define TM_CMD_TIMEOUT 100 /* msecs */
>
> @@ -2399,40 +2402,32 @@ int ufshcd_send_uic_cmd(struct ufs_hba *hba,
> struct uic_command *uic_cmd) }
>
> /**
> - * ufshcd_map_sg - Map scatter-gather list to prdt
> - * @hba: per adapter instance
> - * @lrbp: pointer to local reference block
> - *
> - * Returns 0 in case of success, non-zero value in case of failure
> + * ufshcd_sgl_to_prdt - SG list to PRTD (Physical Region Description Table,
> 4DW format)
> + * @hba: per-adapter instance
> + * @lrbp: pointer to local reference block
> + * @sg_entries: The number of sg lists actually used
> + * @sg_list: Pointer to SG list
> */
> -static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
> +static void ufshcd_sgl_to_prdt(struct ufs_hba *hba, struct ufshcd_lrb *lrbp, int
> sg_entries,
> + struct scatterlist *sg_list)
> +
> {
> struct ufshcd_sg_entry *prd_table;
> struct scatterlist *sg;
> - struct scsi_cmnd *cmd;
> - int sg_segments;
> int i;
>
> - cmd = lrbp->cmd;
> - sg_segments = scsi_dma_map(cmd);
> - if (sg_segments < 0)
> - return sg_segments;
> -
> - if (sg_segments) {
> + if (sg_entries) {
>
> if (hba->quirks & UFSHCD_QUIRK_PRDT_BYTE_GRAN)
> lrbp->utr_descriptor_ptr->prd_table_length =
> - cpu_to_le16((sg_segments *
> - sizeof(struct ufshcd_sg_entry)));
> + cpu_to_le16((sg_entries * sizeof(struct
> + ufshcd_sg_entry)));
> else
> - lrbp->utr_descriptor_ptr->prd_table_length =
> - cpu_to_le16(sg_segments);
> + lrbp->utr_descriptor_ptr->prd_table_length =
> + cpu_to_le16(sg_entries);
>
> prd_table = lrbp->ucd_prdt_ptr;
>
> - scsi_for_each_sg(cmd, sg, sg_segments, i) {
> + for_each_sg(sg_list, sg, sg_entries, i) {
> const unsigned int len = sg_dma_len(sg);
> -
> /*
> * From the UFSHCI spec: "Data Byte Count (DBC): A '0'
> * based value that indicates the length, in bytes, of @@ -2449,6
> +2444,26 @@ static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb
> *lrbp)
> } else {
> lrbp->utr_descriptor_ptr->prd_table_length = 0;
> }
> +}
> +
> +/**
> + * ufshcd_map_sg - Map scatter-gather list to prdt
> + * @hba: per adapter instance
> + * @lrbp: pointer to local reference block
> + *
> + * Returns 0 in case of success, non-zero value in case of failure */
> +static int ufshcd_map_sg(struct ufs_hba *hba, struct ufshcd_lrb *lrbp)
> +{
> + struct scsi_cmnd *cmd;
> + int sg_segments;
> +
> + cmd = lrbp->cmd;
> + sg_segments = scsi_dma_map(cmd);
> + if (sg_segments < 0)
> + return sg_segments;
> +
> + ufshcd_sgl_to_prdt(hba, lrbp, sg_segments, scsi_sglist(cmd));
>
> return 0;
> }
Can those changes in ufahcd_map_sg can be made as a preparatory patch?
> @@ -2496,14 +2511,14 @@ static void ufshcd_disable_intr(struct ufs_hba
> *hba, u32 intrs) }
>
> /**
> - * ufshcd_prepare_req_desc_hdr() - Fills the requests header
> - * descriptor according to request
> - * @lrbp: pointer to local reference block
> + * ufshcd_prepare_req_desc_hdr - Fills UTP Transfer request descriptor
> header according to request
> + * @lrbp: pointer to local reference block
> * @upiu_flags: flags required in the header
> - * @cmd_dir: requests data direction
> + * @cmd_dir: requests data direction
> + * @ehs_length: Total EHS Length (in 32‐bytes units of all Extra Header
> + Segments)
> */
> -static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp,
> - u8 *upiu_flags, enum dma_data_direction cmd_dir)
> +static void ufshcd_prepare_req_desc_hdr(struct ufshcd_lrb *lrbp, u8
> *upiu_flags,
> + enum dma_data_direction cmd_dir,
> +int ehs_length)
> {
> struct utp_transfer_req_desc *req_desc = lrbp->utr_descriptor_ptr;
> u32 data_direction;
> @@ -2522,8 +2537,9 @@ static void ufshcd_prepare_req_desc_hdr(struct
> ufshcd_lrb *lrbp,
> *upiu_flags = UPIU_CMD_FLAGS_NONE;
> }
>
> - dword_0 = data_direction | (lrbp->command_type
> - << UPIU_COMMAND_TYPE_OFFSET);
> + dword_0 = data_direction | (lrbp->command_type <<
> UPIU_COMMAND_TYPE_OFFSET) |
> + ehs_length << 8;
> +
> if (lrbp->intr_cmd)
> dword_0 |= UTP_REQ_DESC_INT_CMD;
>
> @@ -2546,8 +2562,7 @@ static void ufshcd_prepare_req_desc_hdr(struct
> ufshcd_lrb *lrbp, }
>
> /**
> - * ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc,
> - * for scsi commands
> + * ufshcd_prepare_utp_scsi_cmd_upiu() - fills the utp_transfer_req_desc
> + for scsi commands
> * @lrbp: local reference block pointer
> * @upiu_flags: flags
> */
> @@ -2578,8 +2593,7 @@ void ufshcd_prepare_utp_scsi_cmd_upiu(struct
> ufshcd_lrb *lrbp, u8 upiu_flags) }
>
> /**
> - * ufshcd_prepare_utp_query_req_upiu() - fills the utp_transfer_req_desc,
> - * for query requsts
> + * ufshcd_prepare_utp_query_req_upiu() - fills the
> + utp_transfer_req_desc for query requsts
> * @hba: UFS hba
> * @lrbp: local reference block pointer
> * @upiu_flags: flags
> @@ -2650,7 +2664,7 @@ static int ufshcd_compose_devman_upiu(struct
> ufs_hba *hba,
> else
> lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
>
> - ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
> + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE, 0);
> if (hba->dev_cmd.type == DEV_CMD_TYPE_QUERY)
> ufshcd_prepare_utp_query_req_upiu(hba, lrbp, upiu_flags);
> else if (hba->dev_cmd.type == DEV_CMD_TYPE_NOP) @@ -2679,7
> +2693,7 @@ static int ufshcd_comp_scsi_upiu(struct ufs_hba *hba, struct
> ufshcd_lrb *lrbp)
>
> if (likely(lrbp->cmd)) {
> ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags,
> - lrbp->cmd->sc_data_direction);
> +
> + lrbp->cmd->sc_data_direction, 0);
> ufshcd_prepare_utp_scsi_cmd_upiu(lrbp, upiu_flags);
> } else {
> ret = -EINVAL;
> @@ -2945,6 +2959,12 @@ ufshcd_dev_cmd_completion(struct ufs_hba *hba,
> struct ufshcd_lrb *lrbp)
> dev_err(hba->dev, "%s: Reject UPIU not fully implemented\n",
> __func__);
> break;
> + case UPIU_TRANSACTION_RESPONSE:
> + if (hba->dev_cmd.type != DEV_CMD_TYPE_RPMB) {
> + err = -EINVAL;
> + dev_err(hba->dev, "%s: unexpected response %x\n", __func__,
> resp);
> + }
> + break;
> default:
> err = -EINVAL;
> dev_err(hba->dev, "%s: Invalid device management cmd response:
> %x\n", @@ -6838,7 +6858,7 @@ static int
> ufshcd_issue_devman_upiu_cmd(struct ufs_hba *hba,
> /* update the task tag in the request upiu */
> req_upiu->header.dword_0 |= cpu_to_be32(tag);
>
> - ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE);
> + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, DMA_NONE, 0);
>
> /* just copy the upiu request as it is */
> memcpy(lrbp->ucd_req_ptr, req_upiu, sizeof(*lrbp->ucd_req_ptr)); @@ -
> 6961,6 +6981,73 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba *hba,
> return err;
> }
>
> +int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct
> utp_upiu_req *req_upiu,
> + struct utp_upiu_req *rsp_upiu, struct ufs_ehs *ehs_req,
> + struct ufs_ehs *ehs_rsp, int sg_cnt, struct scatterlist *sg_list,
> + enum dma_data_direction dir, int len) {
> + DECLARE_COMPLETION_ONSTACK(wait);
> + const u32 tag = hba->reserved_slot;
> + struct ufshcd_lrb *lrbp;
> + int err = 0;
> + u8 upiu_flags;
> +
> + /* Protects use of hba->reserved_slot. */
> + ufshcd_hold(hba, false);
> + mutex_lock(&hba->dev_cmd.lock);
> + down_read(&hba->clk_scaling_lock);
> +
> + lrbp = &hba->lrb[tag];
> + WARN_ON(lrbp->cmd);
> + lrbp->cmd = NULL;
> + lrbp->task_tag = tag;
> + lrbp->lun = UFS_UPIU_RPMB_WLUN;
> +
> + lrbp->intr_cmd = true;
> + ufshcd_prepare_lrbp_crypto(NULL, lrbp);
> + hba->dev_cmd.type = DEV_CMD_TYPE_RPMB;
> +
> + lrbp->command_type = UTP_CMD_TYPE_UFS_STORAGE;
> +
> + ufshcd_prepare_req_desc_hdr(lrbp, &upiu_flags, dir, len/32);
> +
> + /* update the task tag and LUN in the request upiu */
> + req_upiu->header.dword_0 |= cpu_to_be32(upiu_flags << 16 |
> + UFS_UPIU_RPMB_WLUN << 8 | tag);
> +
> + /* copy the upiu request as it is */
> + memcpy(lrbp->ucd_req_ptr, req_upiu, sizeof(*lrbp->ucd_req_ptr));
> + /* copy ehs */
> + memcpy(lrbp->ucd_req_ptr + 1, ehs_req, sizeof(*ehs_req));
> +
> + if (dir != DMA_NONE && sg_list)
> + ufshcd_sgl_to_prdt(hba, lrbp, sg_cnt, sg_list);
> +
> +
> + memset(lrbp->ucd_rsp_ptr, 0, sizeof(struct utp_upiu_rsp));
> +
> + hba->dev_cmd.complete = &wait;
> +
> + ufshcd_send_command(hba, tag);
> +
> + err = ufshcd_wait_for_dev_cmd(hba, lrbp,
> + ADVANCED_RPMB_REQ_TIMEOUT);
> +
> + if (!err) {
> + /* just copy the upiu response as it is */
> + memcpy(rsp_upiu, lrbp->ucd_rsp_ptr, sizeof(*rsp_upiu));
> +
> + u8 *descp = (u8 *)lrbp->ucd_rsp_ptr + sizeof(*rsp_upiu);
Shouldn't mix declaration & code
Not sure descp is an appropriate name for the EHS data
Maybe just u8 ehs_data = lrbp->ucd_rsp_ptr + 1;
> + u16 ehs_len =
> + be32_to_cpu(lrbp->ucd_rsp_ptr->header.dword_2) >> 24;
> +
> + if (ehs_len == 2 && ehs_rsp)
> + memcpy(ehs_rsp, descp, ehs_len * 32);
> + }
Maybe add a comment: ehs_len is always 2 unless there was an error
Thanks,
Avri
> +
> + up_read(&hba->clk_scaling_lock);
> + mutex_unlock(&hba->dev_cmd.lock);
> + ufshcd_release(hba);
> + return err;
> +}
> +
> /**
> * ufshcd_eh_device_reset_handler() - Reset a single logical unit.
> * @cmd: SCSI command pointer
> diff --git a/include/uapi/scsi/scsi_bsg_ufs.h b/include/uapi/scsi/scsi_bsg_ufs.h
> index d55f2176dfd4..a79adbc89cc0 100644
> --- a/include/uapi/scsi/scsi_bsg_ufs.h
> +++ b/include/uapi/scsi/scsi_bsg_ufs.h
> @@ -14,7 +14,16 @@
> */
>
> #define UFS_CDB_SIZE 16
> -#define UPIU_TRANSACTION_UIC_CMD 0x1F
> +
> +enum ufs_bsg_msg_code {
> + UPIU_TRANSACTION_UIC_CMD = 0x1F,
> + UPIU_TRANSACTION_ARPMB_DATA_WRITE,
> + UPIU_TRANSACTION_ARPMB_DATA_READ,
> + UPIU_TRANSACTION_ARPMB_PROGRAM_KEY,
> + UPIU_TRANSACTION_ARPMB_READ_COUNTER,
> +
> +};
> +
> /* uic commands are 4DW long, per UFSHCI V2.1 paragraph 5.6.1 */ #define
> UIC_CMD_SIZE (sizeof(__u32) * 4)
>
> @@ -79,6 +88,14 @@ struct utp_upiu_req {
> };
> };
>
> +struct ufs_ehs {
> + __u8 blenght;
> + __u8 lehs_type;
> + __u16 wehssub_type;
> + __u8 meta[28];
> + __u8 mac_key[32];
> +};
> +
> /* request (CDB) structure of the sg_io_v4 */ struct ufs_bsg_request {
> __u32 msgcode;
> @@ -102,4 +119,15 @@ struct ufs_bsg_reply {
>
> struct utp_upiu_req upiu_rsp;
> };
> +
> +struct ufs_rpmb_request {
> + struct ufs_bsg_request bsg_request;
> + struct ufs_ehs ehs_req;
> +};
> +
> +struct ufs_rpmb_reply {
> + struct ufs_bsg_reply bsg_reply;
> + struct ufs_ehs ehs_rsp;
> +};
> +
> #endif /* UFS_BSG_H */
> diff --git a/include/ufs/ufshcd.h b/include/ufs/ufshcd.h index
> 96538eb3a6c0..59906cc7d8d3 100644
> --- a/include/ufs/ufshcd.h
> +++ b/include/ufs/ufshcd.h
> @@ -30,6 +30,7 @@ struct ufs_hba;
> enum dev_cmd_type {
> DEV_CMD_TYPE_NOP = 0x0,
> DEV_CMD_TYPE_QUERY = 0x1,
> + DEV_CMD_TYPE_RPMB = 0x2,
> };
>
> enum ufs_event_type {
> @@ -1208,6 +1209,10 @@ int ufshcd_exec_raw_upiu_cmd(struct ufs_hba
> *hba,
> u8 *desc_buff, int *buff_len,
> enum query_opcode desc_op);
>
> +int ufshcd_advanced_rpmb_req_handler(struct ufs_hba *hba, struct
> utp_upiu_req *req_upiu,
> + struct utp_upiu_req *rsp_upiu, struct ufs_ehs *ehs_req,
> + struct ufs_ehs *ehs_rsp, int sg_cnt, struct scatterlist *sg_list,
> + enum dma_data_direction dir, int len);
> int ufshcd_wb_toggle(struct ufs_hba *hba, bool enable); int
> ufshcd_wb_toggle_buf_flush(struct ufs_hba *hba, bool enable); int
> ufshcd_suspend_prepare(struct device *dev);
> --
> 2.25.1
Powered by blists - more mailing lists