linux-kernel - Re: [PATCH 1/2] dt-bindings: pinctrl: qcom,msm8916: convert to dtschema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Date:   Wed, 09 Nov 2022 06:59:47 -0600
From:   Rob Herring <robh@...nel.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc:     Bjorn Andersson <andersson@...nel.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
        Andy Gross <agross@...nel.org>, devicetree@...r.kernel.org,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] dt-bindings: pinctrl: qcom,msm8916: convert to dtschema


On Wed, 09 Nov 2022 11:44:01 +0100, Krzysztof Kozlowski wrote:
> Convert Qualcomm MSM8916 pin controller bindings to DT schema.  Keep the
> parsing of pin configuration subnodes consistent with other Qualcomm
> schemas (children named with '-state' suffix, their children with
> '-pins').
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> ---
>  .../bindings/pinctrl/qcom,msm8916-pinctrl.txt | 195 ------------------
>  .../pinctrl/qcom,msm8916-pinctrl.yaml         | 166 +++++++++++++++
>  2 files changed, 166 insertions(+), 195 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.txt
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8916-pinctrl.yaml
> 

Running 'make dtbs_check' with the schema in this patch gives the
following warnings. Consider if they are expected or the schema is
incorrect. These may not be new warnings.

Note that it is not yet a requirement to have 0 warnings for dtbs_check.
This will change in the future.

Full log is available here: https://patchwork.ozlabs.org/patch/


pinctrl@...0000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-flash-default', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ctp-pwr-en-default', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'gyro-int-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'light-int-default', 'magn-int-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tp-int-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinct
 rl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8150.dtb

pinctrl@...0000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'gpio-led-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mdss', 'motor-en-default', 'muic-i2c-default', 'muic-int-default', 'nfc-default', 'nfc-i2c-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tke
 y-en-default', 'tkey-i2c-default', 'ts-int-default', 'tsp-en-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-grandmax.dtb
	arch/arm/boot/dts/qcom-msm8916-samsung-grandmax.dtb

pinctrl@...0000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mdss', 'motor-en-default', 'muic-i2c-default', 'muic-int-default', 'nfc-default', 'nfc-i2c-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tkey-en-default', 'tkey
 -i2c-default', 'ts-int-default', 'tsp-en-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-e5.dtb
	arch/arm64/boot/dts/qcom/msm8916-samsung-e7.dtb
	arch/arm/boot/dts/qcom-msm8916-samsung-e5.dtb
	arch/arm/boot/dts/qcom-msm8916-samsung-e7.dtb

pinctrl@...0000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mdss', 'muic-i2c-default', 'muic-int-default', 'nfc-default', 'nfc-i2c-default', 'panel-vdd3-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tkey-en-default', 'tk
 ey-i2c-default', 'tkey-led-en-default', 'ts-int-default', 'tsp-en-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-a3u-eur.dtb

pinctrl@...0000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mdss', 'muic-i2c-default', 'muic-int-default', 'nfc-default', 'nfc-i2c-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tkey-en-default', 'tkey-i2c-default', 'ts-i
 nt-default', 'tsp-en-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-a5u-eur.dtb

pinctrl@...0000: 'accel-int-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'gyro-int-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mag-reset-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'proximity-int-default', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'ts-int-reset-default', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-alcatel-idol347.dtb

pinctrl@...0000: 'accel-irq-default', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'gpio-leds-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mag-reset-default', 'nfc-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'prox-irq-default', 'reg-lcd-en-default', 'sdhc2-cd-default', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'ts-irq-default', 'usb-id-default', 'wcnss-active' do not match any of 
 the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-huawei-g7.dtb

pinctrl@...0000: 'adv533-int-active', 'adv7533-int-suspend', 'adv7533-switch-active', 'adv7533-switch-suspend', 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'msm-key-volp-n-default', 'msmgpio-leds', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/apq8016-sbc.dtb
	arch/arm/boot/dts/qcom-apq8016-sbc.dtb

pinctrl@...0000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'button-backlight-default', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'mag-reset-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-longcheer-l8910.dtb

pinctrl@...0000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'fg-alert-default', 'gpio-hall-sensor-default', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'imu-irq-default', 'muic-i2c-default', 'muic-irq-default', 'nfc-default', 'nfc-i2c-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'tkey-default', 'tkey-en-default', 'tkey-i2c-default', 'tkey-led-en-de
 fault', 'tsp-en-default', 'tsp-irq-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-serranove.dtb
	arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dtb

pinctrl@...0000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'imu-default', 'mag-reset-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'sd-vmmc-en-default', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'touchscreen-default', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-asus-z00l.dtb

pinctrl@...0000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'imu-default', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'touchscreen-default', 'usb-id-default', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-wingtech-wt88047.dtb

pinctrl@...0000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'gpio-keys-default', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-samsung-j5.dtb

pinctrl@...0000: 'blsp1-uart1-default', 'blsp1-uart1-sleep', 'blsp1-uart2-default', 'blsp1-uart2-sleep', 'camera-front-default', 'camera-rear-default', 'cci0-default', 'cdc-dmic-lines', 'cdc-pdm-lines', 'ext-mclk-tlmm-lines', 'ext-pri-tlmm-lines', 'ext-pri-ws-line', 'ext-sec-tlmm-lines', 'i2c1-default', 'i2c1-sleep', 'i2c2-default', 'i2c2-sleep', 'i2c3-default', 'i2c3-sleep', 'i2c4-default', 'i2c4-sleep', 'i2c5-default', 'i2c5-sleep', 'i2c6-default', 'i2c6-sleep', 'pmx-sdc1-clk', 'pmx-sdc1-cmd', 'pmx-sdc1-data', 'pmx-sdc2-cd-pin', 'pmx-sdc2-clk', 'pmx-sdc2-cmd', 'pmx-sdc2-data', 'spi1-default', 'spi1-sleep', 'spi2-default', 'spi2-sleep', 'spi3-default', 'spi3-sleep', 'spi4-default', 'spi4-sleep', 'spi5-default', 'spi5-sleep', 'spi6-default', 'spi6-sleep', 'wcnss-active' do not match any of the regexes: '-state$', 'pinctrl-[0-9]+'
	arch/arm64/boot/dts/qcom/msm8916-mtp.dtb