linux-kernel - Re: [PATCH v2 3/3] ARM: dts: qcom-msm8960-cdp: align TLMM pin configuration with DT schema

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221110033753.oyhl7z2edsrkkepg@builder.lan>
Date:   Wed, 9 Nov 2022 21:37:53 -0600
From:   Bjorn Andersson <andersson@...nel.org>
To:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc:     Andy Gross <agross@...nel.org>,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-arm-msm@...r.kernel.org, linux-gpio@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Konrad Dybcio <konrad.dybcio@...aro.org>
Subject: Re: [PATCH v2 3/3] ARM: dts: qcom-msm8960-cdp: align TLMM pin
 configuration with DT schema

On Wed, Nov 09, 2022 at 11:51:40AM +0100, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
> 
> ---
> 
> Changes since v1:
> 1. Add Rb tag
> ---
>  arch/arm/boot/dts/qcom-msm8960-cdp.dts | 19 +++++++++----------
>  1 file changed, 9 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8960-cdp.dts b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> index 3a484ac53917..9a3a510f88ca 100644
> --- a/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> +++ b/arch/arm/boot/dts/qcom-msm8960-cdp.dts
> @@ -60,33 +60,32 @@ &gsbi5_serial {
>  };
>  
>  &msmgpio {
> -	spi1_default: spi1_default {
> -		 mux {
> -			pins = "gpio6", "gpio7", "gpio9";
> -			function = "gsbi1";
> -		 };
> -
> -		 mosi {
> +	spi1_default: spi1-default-state {
> +		 mosi-pins {
>  			pins = "gpio6";
> +			function = "gsbi1";
>  			drive-strength = <12>;
>  			bias-disable;
>  		 };
>  
> -		 miso {
> +		 miso-pins {
>  			pins = "gpio7";
> +			function = "gsbi1";
>  			drive-strength = <12>;
>  			bias-disable;
>  		 };
>  
> -		 cs {
> +		 cs-pins {
>  			pins = "gpio8";
> +			function = "gpio";

I'm changing this to "gsbi1" while applying this patch.

Regards,
Bjorn

>  			drive-strength = <12>;
>  			bias-disable;
>  			output-low;
>  		 };
>  
> -		 clk {
> +		 clk-pins {
>  			pins = "gpio9";
> +			function = "gsbi1";
>  			drive-strength = <12>;
>  			bias-disable;
>  		 };
> -- 
> 2.34.1
>