[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5dea6c72-1323-f052-a386-887c20e9f8c3@somainline.org>
Date: Mon, 14 Nov 2022 15:55:49 +0100
From: Konrad Dybcio <konrad.dybcio@...ainline.org>
To: ~postmarketos/upstreaming@...ts.sr.ht
Cc: martin.botka@...ainline.org,
angelogioacchino.delregno@...ainline.org,
marijn.suijten@...ainline.org, jamipkettunen@...ainline.org,
Thierry Reding <thierry.reding@...il.com>,
Sam Ravnborg <sam@...nborg.org>,
David Airlie <airlied@...ux.ie>,
Daniel Vetter <daniel@...ll.ch>, linux-kernel@...r.kernel.org,
dri-devel@...ts.freedesktop.org
Subject: Re: [PATCH v3 2/2] gpu/drm/panel: Add Sony TD4353 JDI panel driver
On 14/10/2022 18:36, Konrad Dybcio wrote:
>
>
> On 30.09.2022 20:08, Konrad Dybcio wrote:
>> Add support for the Sony TD4353 JDI 2160x1080 display panel used in
>> some Sony Xperia XZ2 and XZ2 Compact smartphones. Due to the specifics
>> of smartphone manufacturing, it is impossible to retrieve a better name
>> for this panel.
>>
>> This revision adds support for the default 60 Hz configuration, however
>> there could possibly be some room for expansion, as the display panels
>> used on Sony devices have historically been capable of >2x refresh rate
>> overclocking.
>>
>> Signed-off-by: Konrad Dybcio <konrad.dybcio@...ainline.org>
>> ---
> Gentle bump
>
> Konrad
Yet another one.
Konrad
>> Changes since v2:
>> - "GPL v2" -> "GPL"
>> - add missing S-o-b (how embarassing)
>> - move { after sony_td4353_assert_reset_gpios() to a new line
>>
>> drivers/gpu/drm/panel/Kconfig | 10 +
>> drivers/gpu/drm/panel/Makefile | 1 +
>> drivers/gpu/drm/panel/panel-sony-td4353-jdi.c | 329 ++++++++++++++++++
>> 3 files changed, 340 insertions(+)
>> create mode 100644 drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
>>
>> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
>> index a582ddd583c2..6ef1b48169b5 100644
>> --- a/drivers/gpu/drm/panel/Kconfig
>> +++ b/drivers/gpu/drm/panel/Kconfig
>> @@ -637,6 +637,16 @@ config DRM_PANEL_SONY_ACX565AKM
>> Say Y here if you want to enable support for the Sony ACX565AKM
>> 800x600 3.5" panel (found on the Nokia N900).
>>
>> +config DRM_PANEL_SONY_TD4353_JDI
>> + tristate "Sony TD4353 JDI panel"
>> + depends on GPIOLIB && OF
>> + depends on DRM_MIPI_DSI
>> + depends on BACKLIGHT_CLASS_DEVICE
>> + help
>> + Say Y here if you want to enable support for the Sony Tama
>> + TD4353 JDI command mode panel as found on some Sony Xperia
>> + XZ2 and XZ2 Compact smartphones.
>> +
>> config DRM_PANEL_SONY_TULIP_TRULY_NT35521
>> tristate "Sony Tulip Truly NT35521 panel"
>> depends on GPIOLIB && OF
>> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
>> index 8e71aa7581b8..8ef27bc86f94 100644
>> --- a/drivers/gpu/drm/panel/Makefile
>> +++ b/drivers/gpu/drm/panel/Makefile
>> @@ -64,6 +64,7 @@ obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7701) += panel-sitronix-st7701.o
>> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7703) += panel-sitronix-st7703.o
>> obj-$(CONFIG_DRM_PANEL_SITRONIX_ST7789V) += panel-sitronix-st7789v.o
>> obj-$(CONFIG_DRM_PANEL_SONY_ACX565AKM) += panel-sony-acx565akm.o
>> +obj-$(CONFIG_DRM_PANEL_SONY_TD4353_JDI) += panel-sony-td4353-jdi.o
>> obj-$(CONFIG_DRM_PANEL_SONY_TULIP_TRULY_NT35521) += panel-sony-tulip-truly-nt35521.o
>> obj-$(CONFIG_DRM_PANEL_TDO_TL070WSH30) += panel-tdo-tl070wsh30.o
>> obj-$(CONFIG_DRM_PANEL_TPO_TD028TTEC1) += panel-tpo-td028ttec1.o
>> diff --git a/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c b/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
>> new file mode 100644
>> index 000000000000..11db62992b8b
>> --- /dev/null
>> +++ b/drivers/gpu/drm/panel/panel-sony-td4353-jdi.c
>> @@ -0,0 +1,329 @@
>> +// SPDX-License-Identifier: GPL-2.0-only
>> +/*
>> + * Copyright (c) 2022 Konrad Dybcio <konrad.dybcio@...ainline.org>
>> + *
>> + * Generated with linux-mdss-dsi-panel-driver-generator with a
>> + * substantial amount of manual adjustments.
>> + *
>> + * SONY Downstream kernel calls this one:
>> + * - "JDI ID3" for Akari (XZ2)
>> + * - "JDI ID4" for Apollo (XZ2 Compact)
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/gpio/consumer.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_device.h>
>> +#include <linux/regulator/consumer.h>
>> +
>> +#include <video/mipi_display.h>
>> +
>> +#include <drm/drm_mipi_dsi.h>
>> +#include <drm/drm_modes.h>
>> +#include <drm/drm_panel.h>
>> +
>> +enum {
>> + TYPE_TAMA_60HZ,
>> + /*
>> + * Leaving room for expansion - SONY very often uses
>> + * *truly reliably* overclockable panels on their flagships!
>> + */
>> +};
>> +
>> +struct sony_td4353_jdi {
>> + struct drm_panel panel;
>> + struct mipi_dsi_device *dsi;
>> + struct regulator_bulk_data supplies[3];
>> + struct gpio_desc *panel_reset_gpio;
>> + struct gpio_desc *touch_reset_gpio;
>> + bool prepared;
>> + int type;
>> +};
>> +
>> +static inline struct sony_td4353_jdi *to_sony_td4353_jdi(struct drm_panel *panel)
>> +{
>> + return container_of(panel, struct sony_td4353_jdi, panel);
>> +}
>> +
>> +static int sony_td4353_jdi_on(struct sony_td4353_jdi *ctx)
>> +{
>> + struct mipi_dsi_device *dsi = ctx->dsi;
>> + struct device *dev = &dsi->dev;
>> + int ret;
>> +
>> + dsi->mode_flags |= MIPI_DSI_MODE_LPM;
>> +
>> + ret = mipi_dsi_dcs_set_column_address(dsi, 0x0000, 0x0437);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to set column address: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = mipi_dsi_dcs_set_page_address(dsi, 0x0000, 0x086f);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to set page address: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = mipi_dsi_dcs_set_tear_scanline(dsi, 0x0000);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to set tear scanline: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to set tear on: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_ADDRESS_MODE, 0x00);
>> +
>> + ret = mipi_dsi_dcs_set_pixel_format(dsi, 0x77);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to set pixel format: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_SET_PARTIAL_ROWS,
>> + 0x00, 0x00, 0x08, 0x6f);
>> +
>> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
>> + return ret;
>> + }
>> + msleep(70);
>> +
>> + mipi_dsi_dcs_write_seq(dsi, MIPI_DCS_WRITE_MEMORY_START);
>> +
>> + ret = mipi_dsi_dcs_set_display_on(dsi);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to turn display on: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static int sony_td4353_jdi_off(struct sony_td4353_jdi *ctx)
>> +{
>> + struct mipi_dsi_device *dsi = ctx->dsi;
>> + struct device *dev = &dsi->dev;
>> + int ret;
>> +
>> + dsi->mode_flags &= ~MIPI_DSI_MODE_LPM;
>> +
>> + ret = mipi_dsi_dcs_set_display_off(dsi);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to set display off: %d\n", ret);
>> + return ret;
>> + }
>> + msleep(22);
>> +
>> + ret = mipi_dsi_dcs_set_tear_off(dsi);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to set tear off: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to enter sleep mode: %d\n", ret);
>> + return ret;
>> + }
>> + msleep(80);
>> +
>> + return 0;
>> +}
>> +
>> +static void sony_td4353_assert_reset_gpios(struct sony_td4353_jdi *ctx, int mode)
>> +{
>> + gpiod_set_value_cansleep(ctx->touch_reset_gpio, mode);
>> + gpiod_set_value_cansleep(ctx->panel_reset_gpio, mode);
>> + usleep_range(5000, 5100);
>> +}
>> +
>> +static int sony_td4353_jdi_prepare(struct drm_panel *panel)
>> +{
>> + struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
>> + struct device *dev = &ctx->dsi->dev;
>> + int ret;
>> +
>> + if (ctx->prepared)
>> + return 0;
>> +
>> + ret = regulator_bulk_enable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to enable regulators: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + msleep(100);
>> +
>> + sony_td4353_assert_reset_gpios(ctx, 1);
>> +
>> + ret = sony_td4353_jdi_on(ctx);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to power on panel: %d\n", ret);
>> + sony_td4353_assert_reset_gpios(ctx, 0);
>> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> + return ret;
>> + }
>> +
>> + ctx->prepared = true;
>> + return 0;
>> +}
>> +
>> +static int sony_td4353_jdi_unprepare(struct drm_panel *panel)
>> +{
>> + struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
>> + struct device *dev = &ctx->dsi->dev;
>> + int ret;
>> +
>> + if (!ctx->prepared)
>> + return 0;
>> +
>> + ret = sony_td4353_jdi_off(ctx);
>> + if (ret < 0)
>> + dev_err(dev, "Failed to power off panel: %d\n", ret);
>> +
>> + sony_td4353_assert_reset_gpios(ctx, 0);
>> + regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
>> +
>> + ctx->prepared = false;
>> + return 0;
>> +}
>> +
>> +static const struct drm_display_mode sony_td4353_jdi_mode_tama_60hz = {
>> + .clock = (1080 + 4 + 8 + 8) * (2160 + 259 + 8 + 8) * 60 / 1000,
>> + .hdisplay = 1080,
>> + .hsync_start = 1080 + 4,
>> + .hsync_end = 1080 + 4 + 8,
>> + .htotal = 1080 + 4 + 8 + 8,
>> + .vdisplay = 2160,
>> + .vsync_start = 2160 + 259,
>> + .vsync_end = 2160 + 259 + 8,
>> + .vtotal = 2160 + 259 + 8 + 8,
>> + .width_mm = 64,
>> + .height_mm = 128,
>> +};
>> +
>> +static int sony_td4353_jdi_get_modes(struct drm_panel *panel,
>> + struct drm_connector *connector)
>> +{
>> + struct sony_td4353_jdi *ctx = to_sony_td4353_jdi(panel);
>> + struct drm_display_mode *mode = NULL;
>> +
>> + if (ctx->type == TYPE_TAMA_60HZ)
>> + mode = drm_mode_duplicate(connector->dev, &sony_td4353_jdi_mode_tama_60hz);
>> + else
>> + return -EINVAL;
>> +
>> + if (!mode)
>> + return -ENOMEM;
>> +
>> + drm_mode_set_name(mode);
>> +
>> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
>> + connector->display_info.width_mm = mode->width_mm;
>> + connector->display_info.height_mm = mode->height_mm;
>> + drm_mode_probed_add(connector, mode);
>> +
>> + return 1;
>> +}
>> +
>> +static const struct drm_panel_funcs sony_td4353_jdi_panel_funcs = {
>> + .prepare = sony_td4353_jdi_prepare,
>> + .unprepare = sony_td4353_jdi_unprepare,
>> + .get_modes = sony_td4353_jdi_get_modes,
>> +};
>> +
>> +static int sony_td4353_jdi_probe(struct mipi_dsi_device *dsi)
>> +{
>> + struct device *dev = &dsi->dev;
>> + struct sony_td4353_jdi *ctx;
>> + int ret;
>> +
>> + ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
>> + if (!ctx)
>> + return -ENOMEM;
>> +
>> + ctx->type = (uintptr_t)of_device_get_match_data(dev);
>> +
>> + ctx->supplies[0].supply = "vddio";
>> + ctx->supplies[1].supply = "vsp";
>> + ctx->supplies[2].supply = "vsn";
>> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(ctx->supplies),
>> + ctx->supplies);
>> + if (ret < 0)
>> + return dev_err_probe(dev, ret, "Failed to get regulators\n");
>> +
>> + ctx->panel_reset_gpio = devm_gpiod_get(dev, "panel-reset", GPIOD_ASIS);
>> + if (IS_ERR(ctx->panel_reset_gpio))
>> + return dev_err_probe(dev, PTR_ERR(ctx->panel_reset_gpio),
>> + "Failed to get panel-reset-gpios\n");
>> +
>> + ctx->touch_reset_gpio = devm_gpiod_get(dev, "touch-reset", GPIOD_ASIS);
>> + if (IS_ERR(ctx->touch_reset_gpio))
>> + return dev_err_probe(dev, PTR_ERR(ctx->touch_reset_gpio),
>> + "Failed to get touch-reset-gpios\n");
>> +
>> + ctx->dsi = dsi;
>> + mipi_dsi_set_drvdata(dsi, ctx);
>> +
>> + dsi->lanes = 4;
>> + dsi->format = MIPI_DSI_FMT_RGB888;
>> + dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS;
>> +
>> + drm_panel_init(&ctx->panel, dev, &sony_td4353_jdi_panel_funcs,
>> + DRM_MODE_CONNECTOR_DSI);
>> +
>> + ret = drm_panel_of_backlight(&ctx->panel);
>> + if (ret)
>> + return dev_err_probe(dev, ret, "Failed to get backlight\n");
>> +
>> + drm_panel_add(&ctx->panel);
>> +
>> + ret = mipi_dsi_attach(dsi);
>> + if (ret < 0) {
>> + dev_err(dev, "Failed to attach to DSI host: %d\n", ret);
>> + drm_panel_remove(&ctx->panel);
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> +static void sony_td4353_jdi_remove(struct mipi_dsi_device *dsi)
>> +{
>> + struct sony_td4353_jdi *ctx = mipi_dsi_get_drvdata(dsi);
>> + int ret;
>> +
>> + ret = mipi_dsi_detach(dsi);
>> + if (ret < 0)
>> + dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
>> +
>> + drm_panel_remove(&ctx->panel);
>> +}
>> +
>> +static const struct of_device_id sony_td4353_jdi_of_match[] = {
>> + { .compatible = "sony,td4353-jdi-tama", .data = (void *)TYPE_TAMA_60HZ },
>> + { /* sentinel */ }
>> +};
>> +MODULE_DEVICE_TABLE(of, sony_td4353_jdi_of_match);
>> +
>> +static struct mipi_dsi_driver sony_td4353_jdi_driver = {
>> + .probe = sony_td4353_jdi_probe,
>> + .remove = sony_td4353_jdi_remove,
>> + .driver = {
>> + .name = "panel-sony-td4353-jdi",
>> + .of_match_table = sony_td4353_jdi_of_match,
>> + },
>> +};
>> +module_mipi_dsi_driver(sony_td4353_jdi_driver);
>> +
>> +MODULE_AUTHOR("Konrad Dybcio <konrad.dybcio@...ainline.org>");
>> +MODULE_DESCRIPTION("DRM panel driver for SONY Xperia XZ2/XZ2c JDI panel");
>> +MODULE_LICENSE("GPL");
Powered by blists - more mailing lists