lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <12JCLR.5D1QEOZPJVQK3@somainline.org>
Date:   Mon, 14 Nov 2022 17:27:37 +0100
From:   Martin Botka <martin.botka@...ainline.org>
To:     martin.botka1@...il.com
Cc:     ~postmarketos/upstreaming@...ts.sr.ht,
        Konrad Dybcio <konrad.dybcio@...ainline.org>,
        AngeloGioacchino Del Regno 
        <angelogioacchino.delregno@...ainline.org>,
        Marijn Suijten <marijn.suijten@...ainline.org>,
        Jami Kettunen <jamipkettunen@...ainline.org>,
        Paul Bouchara <paul.bouchara@...ainline.org>,
        Yenda <jtrmal@...il.com>, Lee Jones <lee@...nel.org>,
        Chen-Yu Tsai <wens@...e.org>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] mfd: ax20x: Add suppport for AXP1530 PMIC

This way my bad. There isnt second patch. It is just this one.
Split it wrong in git.

On Mon, Nov 14 2022 at 05:23:33 PM +01:00:00, Martin Botka 
<martin.botka@...ainline.org> wrote:
> AXP1530 is a PMIC chip produced by X-Powers and an be connected via
> I2C or RSB bus.
> Where AXP313A seems to be closely related so the same driver can be 
> used and
> seen it only paired with H616 SoC.
> 
> Signed-off-by: Martin Botka <martin.botka@...ainline.org>
> ---
>  drivers/mfd/axp20x-i2c.c   |  2 ++
>  drivers/mfd/axp20x-rsb.c   |  1 +
>  drivers/mfd/axp20x.c       | 63 
> ++++++++++++++++++++++++++++++++++++++
>  include/linux/mfd/axp20x.h | 34 ++++++++++++++++++++
>  4 files changed, 100 insertions(+)
> 
> diff --git a/drivers/mfd/axp20x-i2c.c b/drivers/mfd/axp20x-i2c.c
> index 8fd6727dc30a..49c4acee3927 100644
> --- a/drivers/mfd/axp20x-i2c.c
> +++ b/drivers/mfd/axp20x-i2c.c
> @@ -66,6 +66,7 @@ static const struct of_device_id 
> axp20x_i2c_of_match[] = {
>  	{ .compatible = "x-powers,axp223", .data = (void *)AXP223_ID },
>  	{ .compatible = "x-powers,axp803", .data = (void *)AXP803_ID },
>  	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
> +	{ .compatible = "x-powers,axp1530", .data = (void *)AXP1530_ID},
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, axp20x_i2c_of_match);
> @@ -79,6 +80,7 @@ static const struct i2c_device_id axp20x_i2c_id[] = 
> {
>  	{ "axp223", 0 },
>  	{ "axp803", 0 },
>  	{ "axp806", 0 },
> +	{ "axp1530", 0 },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
> diff --git a/drivers/mfd/axp20x-rsb.c b/drivers/mfd/axp20x-rsb.c
> index 214bc0d84d44..29d38be29904 100644
> --- a/drivers/mfd/axp20x-rsb.c
> +++ b/drivers/mfd/axp20x-rsb.c
> @@ -62,6 +62,7 @@ static const struct of_device_id 
> axp20x_rsb_of_match[] = {
>  	{ .compatible = "x-powers,axp806", .data = (void *)AXP806_ID },
>  	{ .compatible = "x-powers,axp809", .data = (void *)AXP809_ID },
>  	{ .compatible = "x-powers,axp813", .data = (void *)AXP813_ID },
> +	{ .compatible = "x-powers,axp1530", .data = (void *)AXP1530_ID },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, axp20x_rsb_of_match);
> diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
> index 880c41fa7021..a24bc2b926ce 100644
> --- a/drivers/mfd/axp20x.c
> +++ b/drivers/mfd/axp20x.c
> @@ -43,6 +43,7 @@ static const char * const axp20x_model_names[] = {
>  	"AXP806",
>  	"AXP809",
>  	"AXP813",
> +	"AXP1530",
>  };
> 
>  static const struct regmap_range axp152_writeable_ranges[] = {
> @@ -168,6 +169,24 @@ static const struct regmap_access_table 
> axp806_volatile_table = {
>  	.n_yes_ranges	= ARRAY_SIZE(axp806_volatile_ranges),
>  };
> 
> +static const struct regmap_range axp1530_writeable_ranges[] = {
> +	regmap_reg_range(AXP1530_ON_INDICATE, AXP1530_FREQUENCY),
> +};
> +
> +static const struct regmap_range axp1530_volatile_ranges[] = {
> +	regmap_reg_range(AXP1530_ON_INDICATE, AXP1530_FREQUENCY),
> +};
> +
> +static const struct regmap_access_table axp1530_writeable_table = {
> +	.yes_ranges = axp1530_writeable_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(axp1530_writeable_ranges),
> +};
> +
> +static const struct regmap_access_table axp1530_volatile_table = {
> +	.yes_ranges = axp1530_volatile_ranges,
> +	.n_yes_ranges = ARRAY_SIZE(axp1530_volatile_ranges),
> +};
> +
>  static const struct resource axp152_pek_resources[] = {
>  	DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_RIS_EDGE, "PEK_DBR"),
>  	DEFINE_RES_IRQ_NAMED(AXP152_IRQ_PEK_FAL_EDGE, "PEK_DBF"),
> @@ -281,6 +300,15 @@ static const struct regmap_config 
> axp806_regmap_config = {
>  	.cache_type	= REGCACHE_RBTREE,
>  };
> 
> +static const struct regmap_config axp1530_regmap_config = {
> +	.reg_bits = 8,
> +	.val_bits = 8,
> +	.wr_table = &axp1530_writeable_table,
> +	.volatile_table = &axp1530_volatile_table,
> +	.max_register = AXP1530_FREQUENCY,
> +	.cache_type = REGCACHE_RBTREE,
> +};
> +
>  #define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask)			\
>  	[_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = 
> BIT(_mask) }
> 
> @@ -502,6 +530,16 @@ static const struct regmap_irq 
> axp809_regmap_irqs[] = {
>  	INIT_REGMAP_IRQ(AXP809, GPIO0_INPUT,		4, 0),
>  };
> 
> +static const struct regmap_irq axp1530_regmap_irqs[] = {
> +	INIT_REGMAP_IRQ(AXP1530, KEY_L2H_EN, 0, 7),
> +	INIT_REGMAP_IRQ(AXP1530, KEY_H2L_EN, 0, 6),
> +	INIT_REGMAP_IRQ(AXP1530, POKSIRQ_EN, 0, 5),
> +	INIT_REGMAP_IRQ(AXP1530, POKLIRQ_EN, 0, 4),
> +	INIT_REGMAP_IRQ(AXP1530, DCDC3_UNDER, 0, 3),
> +	INIT_REGMAP_IRQ(AXP1530, DCDC2_UNDER, 0, 2),
> +	INIT_REGMAP_IRQ(AXP1530, TEMP_OVER, 0, 0),
> +};
> +
>  static const struct regmap_irq_chip axp152_regmap_irq_chip = {
>  	.name			= "axp152_irq_chip",
>  	.status_base		= AXP152_IRQ1_STATE,
> @@ -588,6 +626,18 @@ static const struct regmap_irq_chip 
> axp809_regmap_irq_chip = {
>  	.num_regs		= 5,
>  };
> 
> +static const struct regmap_irq_chip axp1530_regmap_irq_chip = {
> +	.name = "axp1530_irq_chip",
> +	.status_base = AXP1530_IRQ_STATUS1,
> +	.ack_base = AXP1530_IRQ_STATUS1,
> +	.mask_base = AXP1530_IRQ_ENABLE1,
> +	.mask_invert = true,
> +	.init_ack_masked = true,
> +	.irqs = axp1530_regmap_irqs,
> +	.num_irqs = ARRAY_SIZE(axp1530_regmap_irqs),
> +	.num_regs = 1,
> +};
> +
>  static const struct mfd_cell axp20x_cells[] = {
>  	{
>  		.name		= "axp20x-gpio",
> @@ -832,6 +882,13 @@ static const struct mfd_cell axp813_cells[] = {
>  	},
>  };
> 
> +static struct mfd_cell axp1530_cells[] = {
> +	{
> +		.id = 0,
> +		.name = "axp20x-regulator",
> +	},
> +};
> +
>  static struct axp20x_dev *axp20x_pm_power_off;
>  static void axp20x_power_off(void)
>  {
> @@ -942,6 +999,12 @@ int axp20x_match_device(struct axp20x_dev 
> *axp20x)
>  		 */
>  		axp20x->regmap_irq_chip = &axp803_regmap_irq_chip;
>  		break;
> +	case AXP1530_ID:
> +		axp20x->nr_cells = ARRAY_SIZE(axp1530_cells);
> +		axp20x->cells = axp1530_cells;
> +		axp20x->regmap_cfg = &axp1530_regmap_config;
> +		axp20x->regmap_irq_chip = &axp1530_regmap_irq_chip;
> +		break;
>  	default:
>  		dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
>  		return -EINVAL;
> diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
> index 9ab0e2fca7ea..75dcc2411940 100644
> --- a/include/linux/mfd/axp20x.h
> +++ b/include/linux/mfd/axp20x.h
> @@ -21,6 +21,7 @@ enum axp20x_variants {
>  	AXP806_ID,
>  	AXP809_ID,
>  	AXP813_ID,
> +	AXP1530_ID,
>  	NR_AXP20X_VARIANTS,
>  };
> 
> @@ -128,6 +129,18 @@ enum axp20x_variants {
>  #define AXP803_DCDC6_V_OUT		0x25
>  #define AXP803_DCDC_FREQ_CTRL		0x3b
> 
> +#define AXP1530_ON_INDICATE		0x00
> +#define AXP1530_OUTPUT_CONTROL	0x10
> +#define AXP1530_DCDC1_CONRTOL	0x13
> +#define AXP1530_DCDC2_CONRTOL	0x14
> +#define AXP1530_DCDC3_CONRTOL	0x15
> +#define AXP1530_ALDO1_CONRTOL	0x16
> +#define AXP1530_DLDO1_CONRTOL	0x17
> +#define AXP1530_OUTOUT_MONITOR	0x1D
> +#define AXP1530_IRQ_ENABLE1		0x20
> +#define AXP1530_IRQ_STATUS1		0x21
> +#define AXP1530_FREQUENCY		0x87
> +
>  /* Other DCDC regulator control registers are the same as AXP803 */
>  #define AXP813_DCDC7_V_OUT		0x26
> 
> @@ -419,6 +432,16 @@ enum {
>  	AXP813_REG_ID_MAX,
>  };
> 
> +enum
> +{
> +    AXP1530_DCDC1 = 0,
> +    AXP1530_DCDC2,
> +    AXP1530_DCDC3,
> +    AXP1530_LDO1,
> +    AXP1530_LDO2,
> +    AXP1530_REG_ID_MAX,
> +};
> +
>  /* IRQs */
>  enum {
>  	AXP152_IRQ_LDO0IN_CONNECT = 1,
> @@ -632,6 +655,17 @@ enum axp809_irqs {
>  	AXP809_IRQ_GPIO0_INPUT,
>  };
> 
> +enum axp1530_irqs
> +{
> +	AXP1530_IRQ_TEMP_OVER,
> +	AXP1530_IRQ_DCDC2_UNDER = 2,
> +	AXP1530_IRQ_DCDC3_UNDER,
> +	AXP1530_IRQ_POKLIRQ_EN,
> +	AXP1530_IRQ_POKSIRQ_EN,
> +	AXP1530_IRQ_KEY_L2H_EN,
> +	AXP1530_IRQ_KEY_H2L_EN,
> +};
> +
>  struct axp20x_dev {
>  	struct device			*dev;
>  	int				irq;
> --
> 2.38.1
> 


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ