| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <HHJCLR.858WB1ISGFT32@somainline.org>
Date: Mon, 14 Nov 2022 17:36:53 +0100
From: Martin Botka <martin.botka@...ainline.org>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Cc: martin.botka1@...il.com, ~postmarketos/upstreaming@...ts.sr.ht,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...ainline.org>,
Marijn Suijten <marijn.suijten@...ainline.org>,
Jami Kettunen <jamipkettunen@...ainline.org>,
Paul Bouchara <paul.bouchara@...ainline.org>,
Yenda <jtrmal@...il.com>, Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] arm64: dts: Add basic support for BIQU CB1
Yea my bad this was not supposed to be sent this soon.
Well either way V2 will come soon
On Mon, Nov 14 2022 at 05:29:31 PM +01:00:00, Krzysztof Kozlowski
<krzysztof.kozlowski@...aro.org> wrote:
> On 14/11/2022 17:25, Martin Botka wrote:
>> CB1 is Compute Module style board that plugs into Rpi board style
>> adapter or
>> Manta 3D printer boards (M4P/M8P).
>>
>> The board has:
>> H616 SoC
>> 1GB of RAM
>> AXP313A PMIC
>>
>> And the actual boards that CB1 plugs in are just extension to it
>> with ports and
>> thus are not split in DT.
>>
>> Boards have:
>> 4x (3x for Manta boards) USB and 1 USB OTG.
>> SDcard slot for loading images.
>> Ethernet port wired to the internal PHY.
>> 2x HDMI 2.0.
>> Power and Status LEDs.
>>
>> Currently working:
>> Booting
>> USB
>> UART
>>
>> Signed-off-by: Martin Botka <martin.botka@...ainline.org>
>> ---
>> arch/arm64/boot/dts/allwinner/Makefile | 1 +
>> .../dts/allwinner/sun50i-h616-biqu-cb1.dts | 191
>> ++++++++++++++++++
>> 2 files changed, 192 insertions(+)
>> create mode 100644
>> arch/arm64/boot/dts/allwinner/sun50i-h616-biqu-cb1.dts
>>
>> diff --git a/arch/arm64/boot/dts/allwinner/Makefile
>> b/arch/arm64/boot/dts/allwinner/Makefile
>> index 6a96494a2e0a..223f1be73541 100644
>> --- a/arch/arm64/boot/dts/allwinner/Makefile
>> +++ b/arch/arm64/boot/dts/allwinner/Makefile
>> @@ -38,5 +38,6 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64.dtb
>> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
>> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
>> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
>> +dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-biqu-cb1.dtb
>> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
>> dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-x96-mate.dtb
>> diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h616-biqu-cb1.dts
>> b/arch/arm64/boot/dts/allwinner/sun50i-h616-biqu-cb1.dts
>> new file mode 100644
>> index 000000000000..2225a965dddc
>> --- /dev/null
>> +++ b/arch/arm64/boot/dts/allwinner/sun50i-h616-biqu-cb1.dts
>> @@ -0,0 +1,191 @@
>> +// SPDX-License-Identifier: (GPL-2.0+ or MIT)
>> +/*
>> + * Copyright (C) 2022 Arm Ltd.
>> + */
>> +
>> +/dts-v1/;
>> +
>> +#include "sun50i-h616.dtsi"
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/leds/common.h>
>> +
>> +/ {
>> + model = "BIQU CB1";
>> + compatible = "allwinner,sun50i-h616";
>
> That's not a proper board compatible.
>
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + };
>> +
>> + chosen {
>> + stdout-path = "serial0:115200n8";
>> + };
>> +
>> + leds {
>> + compatible = "gpio-leds";
>> +
>> + led-0 {
>> + function = LED_FUNCTION_POWER;
>> + color = <LED_COLOR_ID_RED>;
>> + gpios = <&pio 2 12 GPIO_ACTIVE_HIGH>; /* PC12 */
>> + default-state = "on";
>> + };
>> +
>> + led-1 {
>> + function = LED_FUNCTION_STATUS;
>> + color = <LED_COLOR_ID_GREEN>;
>> + gpios = <&pio 2 13 GPIO_ACTIVE_HIGH>; /* PC13 */
>> + };
>> + };
>> +
>> + reg_vcc5v: vcc5v {
>
> regulator prefix. Keep it consistent.
>
>> + /* board wide 5V supply directly from the USB-C socket */
>> + compatible = "regulator-fixed";
>> + regulator-name = "vcc-5v";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + regulator-always-on;
>> + };
>> +
>> + reg_usb1_vbus: regulator-usb1-vbus {
>> + compatible = "regulator-fixed";
>> + regulator-name = "usb1-vbus";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + vin-supply = <®_vcc5v>;
>> + enable-active-high;
>> + gpio = <&pio 2 16 GPIO_ACTIVE_HIGH>; /* PC16 */
>> + };
>> +};
>> +
>> +&ehci0 {
>> + status = "okay";
>> +};
>> +
>> +&ehci1 {
>> + status = "okay";
>> +};
>> +
>> +&ehci2 {
>> + status = "okay";
>> +};
>> +
>> +&ehci3 {
>> + status = "okay";
>> +};
>> +
>> +&mmc0 {
>> + vmmc-supply = <®_dldo1>;
>> + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
>> + no-1-8-v;
>> + bus-width = <4>;
>> + status = "disabled";
>> +};
>> +
>> +&ohci0 {
>> + status = "okay";
>> +};
>> +
>> +&ohci1 {
>> + status = "okay";
>> +};
>> +
>> +&ohci2 {
>> + status = "okay";
>> +};
>> +
>> +&ohci3 {
>> + status = "okay";
>> +};
>> +
>> +&r_i2c {
>> + status = "okay";
>> +
>> + axp1530: pmic@36 {
>> + compatible = "x-powers,axp1530";
>> + status = "okay";
>
> Drop.
>
>> + reg = <0x36>;
>> + wakeup-source;
>> +
>> + standby_param: standby_param {
>
> Does not look like supported/documented/valid property. Test your DTS
> with `make dtbs_check`.
>
>
> Best regards,
> Krzysztof
>
Powered by blists - more mailing lists