| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1668444952-20947-3-git-send-email-lizhi.hou@amd.com>
Date: Mon, 14 Nov 2022 08:55:52 -0800
From: Lizhi Hou <lizhi.hou@....com>
To: <vkoul@...nel.org>, <dmaengine@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
CC: Lizhi Hou <lizhi.hou@....com>, <max.zhen@....com>,
<sonal.santan@....com>, <larry.liu@....com>, <brian.xu@....com>,
<tumic@...see.org>
Subject: [PATCH V10 XDMA 2/2] dmaengine: xilinx: xdma: Add user logic interrupt support
The Xilinx DMA/Bridge Subsystem for PCIe (XDMA) provides up to 16 user
interrupt wires to user logic that generate interrupts to the host.
This patch adds APIs to enable/disable user logic interrupt for a given
interrupt wire index.
Signed-off-by: Lizhi Hou <lizhi.hou@....com>
Signed-off-by: Sonal Santan <sonal.santan@....com>
Signed-off-by: Max Zhen <max.zhen@....com>
Signed-off-by: Brian Xu <brian.xu@....com>
---
MAINTAINERS | 1 +
drivers/dma/xilinx/xdma.c | 85 ++++++++++++++++++++++++++++++++++++
include/linux/dma/amd_xdma.h | 16 +++++++
3 files changed, 102 insertions(+)
create mode 100644 include/linux/dma/amd_xdma.h
diff --git a/MAINTAINERS b/MAINTAINERS
index d598c4e23901..eaf6590dda19 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -22583,6 +22583,7 @@ L: dmaengine@...r.kernel.org
S: Supported
F: drivers/dma/xilinx/xdma-regs.h
F: drivers/dma/xilinx/xdma.c
+F: include/linux/dma/amd_xdma.h
F: include/linux/platform_data/amd_xdma.h
XILINX ZYNQMP DPDMA DRIVER
diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
index 118528295fb7..846f10317bba 100644
--- a/drivers/dma/xilinx/xdma.c
+++ b/drivers/dma/xilinx/xdma.c
@@ -25,6 +25,7 @@
#include <linux/dmapool.h>
#include <linux/regmap.h>
#include <linux/dmaengine.h>
+#include <linux/dma/amd_xdma.h>
#include <linux/platform_device.h>
#include <linux/platform_data/amd_xdma.h>
#include <linux/dma-mapping.h>
@@ -713,6 +714,7 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
static int xdma_irq_init(struct xdma_device *xdev)
{
u32 irq = xdev->irq_start;
+ u32 user_irq_start;
int i, j, ret;
/* return failure if there are not enough IRQs */
@@ -755,6 +757,18 @@ static int xdma_irq_init(struct xdma_device *xdev)
goto failed_init_c2h;
}
+ /* config user IRQ registers if needed */
+ user_irq_start = XDMA_CHAN_NUM(xdev);
+ if (xdev->irq_num > user_irq_start) {
+ ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
+ user_irq_start,
+ xdev->irq_num - user_irq_start);
+ if (ret) {
+ xdma_err(xdev, "failed to set user vectors: %d", ret);
+ goto failed_init_c2h;
+ }
+ }
+
/* enable interrupt */
ret = xdma_write_reg(xdev, XDMA_IRQ_BASE, XDMA_IRQ_CHAN_INT_EN_W1S, ~0);
if (ret)
@@ -780,6 +794,77 @@ static bool xdma_filter_fn(struct dma_chan *chan, void *param)
return chan_info->dir == xdma_chan->dir;
}
+/**
+ * xdma_disable_user_irq - Disable user interrupt
+ * @pdev: Pointer to the platform_device structure
+ * @irq_num: System IRQ number
+ */
+void xdma_disable_user_irq(struct platform_device *pdev, u32 irq_num)
+{
+ struct xdma_device *xdev = platform_get_drvdata(pdev);
+ u32 user_irq_index;
+
+ user_irq_index = irq_num - xdev->irq_start;
+ if (user_irq_index < XDMA_CHAN_NUM(xdev) ||
+ user_irq_index >= xdev->irq_num) {
+ xdma_err(xdev, "invalid user irq number");
+ return;
+ }
+ user_irq_index -= XDMA_CHAN_NUM(xdev);
+
+ xdma_write_reg(xdev, XDMA_IRQ_BASE, XDMA_IRQ_USER_INT_EN_W1C,
+ (1 << user_irq_index));
+}
+EXPORT_SYMBOL(xdma_disable_user_irq);
+
+/**
+ * xdma_enable_user_irq - Enable user logic interrupt
+ * @pdev: Pointer to the platform_device structure
+ * @irq_num: System IRQ number
+ */
+int xdma_enable_user_irq(struct platform_device *pdev, u32 irq_num)
+{
+ struct xdma_device *xdev = platform_get_drvdata(pdev);
+ u32 user_irq_index;
+ int ret;
+
+ user_irq_index = irq_num - xdev->irq_start;
+ if (user_irq_index < XDMA_CHAN_NUM(xdev) ||
+ user_irq_index >= xdev->irq_num) {
+ xdma_err(xdev, "invalid user irq number");
+ return -EINVAL;
+ }
+ user_irq_index -= XDMA_CHAN_NUM(xdev);
+
+ ret = xdma_write_reg(xdev, XDMA_IRQ_BASE, XDMA_IRQ_USER_INT_EN_W1S,
+ (1 << user_irq_index));
+ if (ret)
+ return ret;
+
+ return 0;
+}
+EXPORT_SYMBOL(xdma_enable_user_irq);
+
+/**
+ * xdma_get_user_irq - Get system IRQ number
+ * @pdev: Pointer to the platform_device structure
+ * @user_irq_index: User logic IRQ wire index
+ *
+ * Return: The system IRQ number allocated for the given wire index.
+ */
+int xdma_get_user_irq(struct platform_device *pdev, u32 user_irq_index)
+{
+ struct xdma_device *xdev = platform_get_drvdata(pdev);
+
+ if (XDMA_CHAN_NUM(xdev) + user_irq_index >= xdev->irq_num) {
+ xdma_err(xdev, "invalid user irq index");
+ return -EINVAL;
+ }
+
+ return xdev->irq_start + XDMA_CHAN_NUM(xdev) + user_irq_index;
+}
+EXPORT_SYMBOL(xdma_get_user_irq);
+
/**
* xdma_remove - Driver remove function
* @pdev: Pointer to the platform_device structure
diff --git a/include/linux/dma/amd_xdma.h b/include/linux/dma/amd_xdma.h
new file mode 100644
index 000000000000..ceba69ed7cb4
--- /dev/null
+++ b/include/linux/dma/amd_xdma.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright (C) 2022, Advanced Micro Devices, Inc.
+ */
+
+#ifndef _DMAENGINE_AMD_XDMA_H
+#define _DMAENGINE_AMD_XDMA_H
+
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+
+int xdma_enable_user_irq(struct platform_device *pdev, u32 irq_num);
+void xdma_disable_user_irq(struct platform_device *pdev, u32 irq_num);
+int xdma_get_user_irq(struct platform_device *pdev, u32 user_irq_index);
+
+#endif /* _DMAENGINE_AMD_XDMA_H */
--
2.27.0
Powered by blists - more mailing lists