[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221114233940.2096237-4-tanmay.shah@amd.com>
Date: Mon, 14 Nov 2022 15:39:37 -0800
From: Tanmay Shah <tanmay.shah@....com>
To: <andersson@...nel.org>, <mathieu.poirier@...aro.org>,
<robh+dt@...nel.org>, <krzysztof.kozlowski+dt@...aro.org>,
<michal.simek@....com>
CC: <bill.mills@...aro.org>, <linux-remoteproc@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>,
Ben Levinsky <ben.levinsky@....com>,
"Tanmay Shah" <tanmay.shah@....com>
Subject: [PATCH v11 3/6] firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU configuration.
From: Ben Levinsky <ben.levinsky@....com>
Add ZynqMP firmware ioctl enums for RPU configuration and TCM Nodes for
later use via request_node and release_node
Signed-off-by: Ben Levinsky <ben.levinsky@....com>
Signed-off-by: Tanmay Shah <tanmay.shah@....com>
Acked-by: Michal Simek <michal.simek@....com>
---
include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
Changes in v11:
- None
Changes in v10:
- None
Changes in v9:
- None
Changes in v8:
- None
Changes in v7:
- None
Changes in v6:
- None
Changes in v5:
- None
Changes in v4:
- None
Changes in v3:
- None
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 76d2b3ebad84..bdbf855b5eef 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -135,6 +135,10 @@ enum pm_ret_status {
};
enum pm_ioctl_id {
+ IOCTL_GET_RPU_OPER_MODE = 0,
+ IOCTL_SET_RPU_OPER_MODE = 1,
+ IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+ IOCTL_TCM_COMB_CONFIG = 3,
IOCTL_SD_DLL_RESET = 6,
IOCTL_SET_SD_TAPDELAY = 7,
IOCTL_SET_PLL_FRAC_MODE = 8,
@@ -175,6 +179,21 @@ enum pm_query_id {
PM_QID_CLOCK_GET_MAX_DIVISOR = 13,
};
+enum rpu_oper_mode {
+ PM_RPU_MODE_LOCKSTEP = 0,
+ PM_RPU_MODE_SPLIT = 1,
+};
+
+enum rpu_boot_mem {
+ PM_RPU_BOOTMEM_LOVEC = 0,
+ PM_RPU_BOOTMEM_HIVEC = 1,
+};
+
+enum rpu_tcm_comb {
+ PM_RPU_TCM_SPLIT = 0,
+ PM_RPU_TCM_COMB = 1,
+};
+
enum zynqmp_pm_reset_action {
PM_RESET_ACTION_RELEASE = 0,
PM_RESET_ACTION_ASSERT = 1,
--
2.25.1
Powered by blists - more mailing lists