| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221114110621.4639-19-johan+linaro@kernel.org>
Date: Mon, 14 Nov 2022 12:06:17 +0100
From: Johan Hovold <johan+linaro@...nel.org>
To: Vinod Koul <vkoul@...nel.org>
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Dmitry Baryshkov <dmitry.baryshkov@...aro.org>,
linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Johan Hovold <johan+linaro@...nel.org>
Subject: [PATCH v2 18/22] phy: qcom-qmp-combo: merge USB and DP configurations
It does not really make any sense to keep separate configuration
structures for the USB and DP parts of the same PHY so merge them.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
Signed-off-by: Johan Hovold <johan+linaro@...nel.org>
---
drivers/phy/qualcomm/phy-qcom-qmp-combo.c | 182 +++++++---------------
1 file changed, 57 insertions(+), 125 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
index a0abeb7c3bca..298477259ee6 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp-combo.c
@@ -798,11 +798,7 @@ static const u8 qmp_dp_v5_voltage_swing_hbr_rbr[4][4] = {
struct qmp_phy;
-/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
- /* phy-type - PCIE/UFS/USB */
- unsigned int type;
-
/* Init sequence for PHY blocks - serdes, tx, rx, pcs */
const struct qmp_phy_init_tbl *serdes_tbl;
int serdes_tbl_num;
@@ -863,11 +859,6 @@ struct qmp_phy_cfg {
};
-struct qmp_phy_combo_cfg {
- const struct qmp_phy_cfg *usb_cfg;
- const struct qmp_phy_cfg *dp_cfg;
-};
-
/**
* struct qmp_phy - per-lane phy descriptor
*
@@ -1007,9 +998,7 @@ static const char * const sc7180_usb3phy_reset_l[] = {
"phy",
};
-static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
-
+static const struct qmp_phy_cfg sc7180_usb3dpphy_cfg = {
.serdes_tbl = qmp_v3_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
.tx_tbl = qmp_v3_usb3_tx_tbl,
@@ -1018,19 +1007,6 @@ static const struct qmp_phy_cfg sc7180_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
.pcs_tbl = qmp_v3_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = sc7180_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
- .type = PHY_TYPE_DP,
.dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
@@ -1055,16 +1031,19 @@ static const struct qmp_phy_cfg sc7180_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sc7180_usb3dpphy_cfg = {
- .usb_cfg = &sc7180_usb3phy_cfg,
- .dp_cfg = &sc7180_dpphy_cfg,
-};
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = sc7180_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(sc7180_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
-static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+ .has_pwrdn_delay = true,
+};
+static const struct qmp_phy_cfg sdm845_usb3dpphy_cfg = {
.serdes_tbl = qmp_v3_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(qmp_v3_usb3_serdes_tbl),
.tx_tbl = qmp_v3_usb3_tx_tbl,
@@ -1073,24 +1052,11 @@ static const struct qmp_phy_cfg sdm845_usb3phy_cfg = {
.rx_tbl_num = ARRAY_SIZE(qmp_v3_usb3_rx_tbl),
.pcs_tbl = qmp_v3_usb3_pcs_tbl,
.pcs_tbl_num = ARRAY_SIZE(qmp_v3_usb3_pcs_tbl),
- .clk_list = qmp_v3_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v3_usb3phy_regs_layout,
-
- .has_pwrdn_delay = true,
-};
-static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
- .type = PHY_TYPE_DP,
-
- .serdes_tbl = qmp_v3_dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
- .tx_tbl = qmp_v3_dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
+ .dp_serdes_tbl = qmp_v3_dp_serdes_tbl,
+ .dp_serdes_tbl_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl),
+ .dp_tx_tbl = qmp_v3_dp_tx_tbl,
+ .dp_tx_tbl_num = ARRAY_SIZE(qmp_v3_dp_tx_tbl),
.serdes_tbl_rbr = qmp_v3_dp_serdes_tbl_rbr,
.serdes_tbl_rbr_num = ARRAY_SIZE(qmp_v3_dp_serdes_tbl_rbr),
@@ -1110,16 +1076,19 @@ static const struct qmp_phy_cfg sdm845_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v3_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v3_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v3_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sdm845_usb3dpphy_cfg = {
- .usb_cfg = &sdm845_usb3phy_cfg,
- .dp_cfg = &sdm845_dpphy_cfg,
-};
+ .clk_list = qmp_v3_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v3_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v3_usb3phy_regs_layout,
-static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
+ .has_pwrdn_delay = true,
+};
+static const struct qmp_phy_cfg sc8180x_usb3dpphy_cfg = {
.serdes_tbl = sm8150_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
.tx_tbl = sm8150_usb3_tx_tbl,
@@ -1130,20 +1099,6 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_tbl),
.pcs_usb_tbl = sm8150_usb3_pcs_usb_tbl,
.pcs_usb_tbl_num = ARRAY_SIZE(sm8150_usb3_pcs_usb_tbl),
- .clk_list = qmp_v4_phy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
- .pcs_usb_offset = 0x300,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
- .type = PHY_TYPE_DP,
.dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
@@ -1168,24 +1123,7 @@ static const struct qmp_phy_cfg sc8180x_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-
-static const struct qmp_phy_combo_cfg sc8180x_usb3dpphy_cfg = {
- .usb_cfg = &sm8150_usb3phy_cfg,
- .dp_cfg = &sc8180x_dpphy_cfg,
-};
-
-static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
- .type = PHY_TYPE_USB3,
- .serdes_tbl = sc8280xp_usb43dp_serdes_tbl,
- .serdes_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_serdes_tbl),
- .tx_tbl = sc8280xp_usb43dp_tx_tbl,
- .tx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_tx_tbl),
- .rx_tbl = sc8280xp_usb43dp_rx_tbl,
- .rx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_rx_tbl),
- .pcs_tbl = sc8280xp_usb43dp_pcs_tbl,
- .pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_pcs_tbl),
.clk_list = qmp_v4_phy_clk_l,
.num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
.reset_list = msm8996_usb3phy_reset_l,
@@ -1194,10 +1132,19 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_usb_cfg = {
.num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
.regs = qmp_v4_usb3phy_regs_layout,
.pcs_usb_offset = 0x300,
+
+ .has_pwrdn_delay = true,
};
-static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
- .type = PHY_TYPE_DP,
+static const struct qmp_phy_cfg sc8280xp_usb43dpphy_cfg = {
+ .serdes_tbl = sc8280xp_usb43dp_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_serdes_tbl),
+ .tx_tbl = sc8280xp_usb43dp_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_tx_tbl),
+ .rx_tbl = sc8280xp_usb43dp_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_rx_tbl),
+ .pcs_tbl = sc8280xp_usb43dp_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sc8280xp_usb43dp_pcs_tbl),
.dp_serdes_tbl = qmp_v5_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v5_dp_serdes_tbl),
@@ -1222,16 +1169,18 @@ static const struct qmp_phy_cfg sc8280xp_usb43dp_dp_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v5_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sc8280xp_usb43dpphy_cfg = {
- .usb_cfg = &sc8280xp_usb43dp_usb_cfg,
- .dp_cfg = &sc8280xp_usb43dp_dp_cfg,
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
};
-static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
- .type = PHY_TYPE_USB3,
-
+static const struct qmp_phy_cfg sm8250_usb3dpphy_cfg = {
.serdes_tbl = sm8150_usb3_serdes_tbl,
.serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
.tx_tbl = sm8250_usb3_tx_tbl,
@@ -1242,20 +1191,6 @@ static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
.pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
.pcs_usb_tbl = sm8250_usb3_pcs_usb_tbl,
.pcs_usb_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_usb_tbl),
- .clk_list = qmp_v4_sm8250_usbphy_clk_l,
- .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
- .reset_list = msm8996_usb3phy_reset_l,
- .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
- .vreg_list = qmp_phy_vreg_l,
- .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
- .regs = qmp_v4_usb3phy_regs_layout,
- .pcs_usb_offset = 0x300,
-
- .has_pwrdn_delay = true,
-};
-
-static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
- .type = PHY_TYPE_DP,
.dp_serdes_tbl = qmp_v4_dp_serdes_tbl,
.dp_serdes_tbl_num = ARRAY_SIZE(qmp_v4_dp_serdes_tbl),
@@ -1280,11 +1215,17 @@ static const struct qmp_phy_cfg sm8250_dpphy_cfg = {
.configure_dp_tx = qcom_qmp_v4_phy_configure_dp_tx,
.configure_dp_phy = qcom_qmp_v4_phy_configure_dp_phy,
.calibrate_dp_phy = qcom_qmp_v4_dp_phy_calibrate,
-};
-static const struct qmp_phy_combo_cfg sm8250_usb3dpphy_cfg = {
- .usb_cfg = &sm8250_usb3phy_cfg,
- .dp_cfg = &sm8250_dpphy_cfg,
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+ .pcs_usb_offset = 0x300,
+
+ .has_pwrdn_delay = true,
};
static void qmp_combo_configure_lane(void __iomem *base,
@@ -2697,10 +2638,7 @@ static int qmp_combo_probe(struct platform_device *pdev)
void __iomem *serdes;
void __iomem *usb_serdes;
void __iomem *dp_serdes = NULL;
- const struct qmp_phy_combo_cfg *combo_cfg = NULL;
const struct qmp_phy_cfg *cfg = NULL;
- const struct qmp_phy_cfg *usb_cfg = NULL;
- const struct qmp_phy_cfg *dp_cfg = NULL;
int num, id, expected_phys;
int ret;
@@ -2711,13 +2649,10 @@ static int qmp_combo_probe(struct platform_device *pdev)
qmp->dev = dev;
dev_set_drvdata(dev, qmp);
- combo_cfg = of_device_get_match_data(dev);
- if (!combo_cfg)
+ cfg = of_device_get_match_data(dev);
+ if (!cfg)
return -EINVAL;
- usb_cfg = combo_cfg->usb_cfg;
- cfg = usb_cfg; /* Setup clks and regulators */
-
usb_serdes = serdes = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(serdes))
return PTR_ERR(serdes);
@@ -2730,7 +2665,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
if (IS_ERR(dp_serdes))
return PTR_ERR(dp_serdes);
- dp_cfg = combo_cfg->dp_cfg;
expected_phys = 2;
mutex_init(&qmp->phy_mutex);
@@ -2769,7 +2703,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
id = 0;
for_each_available_child_of_node(dev->of_node, child) {
if (of_node_name_eq(child, "dp-phy")) {
- cfg = dp_cfg;
serdes = dp_serdes;
/* Create per-lane phy */
@@ -2787,7 +2720,6 @@ static int qmp_combo_probe(struct platform_device *pdev)
goto err_node_put;
}
} else if (of_node_name_eq(child, "usb3-phy")) {
- cfg = usb_cfg;
serdes = usb_serdes;
/* Create per-lane phy */
--
2.37.4
Powered by blists - more mailing lists