[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <70108911-4934-170f-8e66-ed2ff7d63be5@collabora.com>
Date: Mon, 14 Nov 2022 12:52:33 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Macpaul Lin <macpaul.lin@...iatek.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Fabien Parent <fparent@...libre.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Miles Chen <miles.chen@...iatek.com>,
Bear Wang <bear.wang@...iatek.com>,
Pablo Sun <pablo.sun@...iatek.com>,
Mediatek WSD Upstream <wsd_upstream@...iatek.com>,
Macpaul Lin <macpaul@...il.com>, linux-usb@...r.kernel.org,
stable@...r.kernel.org
Subject: Re: [RESEND PATCH v2] arm64: dts: mediatek: mt8195-demo: fix the
memory size of node secmon
Il 11/11/22 10:55, Macpaul Lin ha scritto:
> The size of device tree node secmon (bl31_secmon_reserved) was
> incorrect. It should be increased to 2MiB (0x200000).
>
> The origin setting will cause some abnormal behavior due to
> trusted-firmware-a and related firmware didn't load correctly.
> The incorrect behavior may vary because of different software stacks.
> For example, it will cause build error in some Yocto project because
> it will check if there was enough memory to load trusted-firmware-a
> to the reserved memory.
>
> When mt8195-demo.dts sent to the upstream, at that time the size of
> BL31 was small. Because supported functions and modules in BL31 are
> basic sets when the board was under early development stage.
>
> Now BL31 includes more firmwares of coprocessors and maturer functions
> so the size has grown bigger in real applications. According to the value
> reported by customers, we think reserved 2MiB for BL31 might be enough
> for maybe the following 2 or 3 years.
>
> Cc: stable@...r.kernel.org # v5.19
> Fixes: 6147314aeedc ("arm64: dts: mediatek: Add device-tree for MT8195 Demo board")
> Signed-off-by: Macpaul Lin <macpaul.lin@...iatek.com>
> Reviewed-by: Miles Chen <miles.chen@...iatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Powered by blists - more mailing lists