[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221115154832.19759-1-sinthu.raja@ti.com>
Date: Tue, 15 Nov 2022 21:18:29 +0530
From: Sinthu Raja <sinthu.raja@...tralsolutions.com>
To: Nishanth Menon <nm@...com>, Tero Kristo <kristo@...nel.org>,
Rob Herring <robh+dt@...nel.org>
Cc: Vignesh Raghavendra <vigneshr@...com>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Sinthu Raja <sinthu.raja@...com>
Subject: [PATCH V3 0/3] AM68 SK: Add initial support
From: Sinthu Raja <sinthu.raja@...com>
Hi,
This series of patches add support for AM68 Starter kit(SK). AM68 SK
is a low cost, small form factor board designed for TI’s J721S2/AM68 SoC.
Refer below link to J721S2/AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28
Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
Changes in V3:
Addressed all the review comments and the changes are captured in seperate patches.
- Removed the unused nodes that are disabled by default.
- Updated the gpio regulator node: gpio-regulator-tlv to "regulator-tlv".
V1: https://lore.kernel.org/linux-arm-kernel/20221018123849.23695-1-sinthu.raja@ti.com/t/#mbe43b02221733bb6eb06b203359e90ec08406afc
V2: https://lore.kernel.org/lkml/20221107123852.8063-1-sinthu.raja@ti.com/
Sinthu Raja (3):
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: ti: Add initial support for AM68 SK System on Module
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
.../devicetree/bindings/arm/ti/k3.yaml | 1 +
arch/arm64/boot/dts/ti/Makefile | 2 +
.../boot/dts/ti/k3-am68-sk-base-board.dts | 335 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 31 ++
4 files changed, 369 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
--
2.36.1
Powered by blists - more mailing lists