linux-kernel - [PATCH v2] spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221115162654.2016820-1-frieder@fris.de>
Date:   Tue, 15 Nov 2022 17:26:53 +0100
From:   Frieder Schrempf <frieder@...s.de>
To:     David Jander <david@...tonic.nl>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-spi@...r.kernel.org, Marc Kleine-Budde <mkl@...gutronix.de>,
        Mark Brown <broonie@...nel.org>,
        Sascha Hauer <s.hauer@...gutronix.de>,
        Shawn Guo <shawnguo@...nel.org>
Cc:     Frieder Schrempf <frieder.schrempf@...tron.de>,
        Fabio Estevam <festevam@...il.com>,
        Marek Vasut <marex@...x.de>, stable@...r.kernel.org,
        Baruch Siach <baruch.siach@...lu.com>,
        Minghao Chi <chi.minghao@....com.cn>,
        NXP Linux Team <linux-imx@....com>,
        Pengutronix Kernel Team <kernel@...gutronix.de>
Subject: [PATCH v2] spi: spi-imx: Fix spi_bus_clk if requested clock is higher than input clock

From: Frieder Schrempf <frieder.schrempf@...tron.de>

In case the requested bus clock is higher than the input clock, the correct
dividers (pre = 0, post = 0) are returned from mx51_ecspi_clkdiv(), but
*fres is left uninitialized and therefore contains an arbitrary value.

This causes trouble for the recently introduced PIO polling feature as the
value in spi_imx->spi_bus_clk is used there to calculate for which
transfers to enable PIO polling.

Fix this by setting *fres even if no clock dividers are in use.

This issue was observed on Kontron BL i.MX8MM with an SPI peripheral clock set
to 50 MHz by default and a requested SPI bus clock of 80 MHz for the SPI NOR
flash.

With the fix applied the debug message from mx51_ecspi_clkdiv() now prints the
following:

spi_imx 30820000.spi: mx51_ecspi_clkdiv: fin: 50000000, fspi: 50000000,
post: 0, pre: 0

Fixes: 07e759387788 ("spi: spi-imx: add PIO polling support")
Cc: Marc Kleine-Budde <mkl@...gutronix.de>
Cc: David Jander <david@...tonic.nl>
Cc: Fabio Estevam <festevam@...il.com>
Cc: Mark Brown <broonie@...nel.org>
Cc: Marek Vasut <marex@...x.de>
Cc: stable@...r.kernel.org
Signed-off-by: Frieder Schrempf <frieder.schrempf@...tron.de>
---

Changes for v2:

* Remove the reference and the Fixes tag for commit 6fd8b8503a0d as it is
  incorrect.
---
 drivers/spi/spi-imx.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c
index 30d82cc7300b..468ce0a2b282 100644
--- a/drivers/spi/spi-imx.c
+++ b/drivers/spi/spi-imx.c
@@ -444,8 +444,7 @@ static unsigned int mx51_ecspi_clkdiv(struct spi_imx_data *spi_imx,
 	unsigned int pre, post;
 	unsigned int fin = spi_imx->spi_clk;
 
-	if (unlikely(fspi > fin))
-		return 0;
+	fspi = min(fspi, fin);
 
 	post = fls(fin) - fls(fspi);
 	if (fin > fspi << post)
-- 
2.38.1