[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <8732f418-a8eb-3cb4-962f-2353fe8d0154@collabora.com>
Date: Tue, 15 Nov 2022 09:52:18 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Rex-BC Chen (陳柏辰)
<Rex-BC.Chen@...iatek.com>,
"matthias.bgg@...il.com" <matthias.bgg@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"krzysztof.kozlowski+dt@...aro.org"
<krzysztof.kozlowski+dt@...aro.org>
Cc: "linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
Project_Global_Chrome_Upstream_Group
<Project_Global_Chrome_Upstream_Group@...iatek.com>
Subject: Re: [PATCH v4 2/4] arm64: dts: mt8195: Add edptx and dptx nodes
Il 15/11/22 08:58, Rex-BC Chen (陳柏辰) ha scritto:
> On Fri, 2022-11-11 at 13:22 +0100, Matthias Brugger wrote:
>>
>> On 10/11/2022 07:37, Bo-Chen Chen wrote:
>>> In MT8195, we use edptx as the internal display interface and use
>>> dptx as the external display interface. Therefore, we need to add
>>> these nodes to support the internal display and the external
>>> display.
>>>
>>> - Add dp calibration data in the efuse node.
>>> - Add edptx and dptx nodes for MT8195.
>>>
>>> Signed-off-by: Bo-Chen Chen <rex-bc.chen@...iatek.com>
>>> Reviewed-by: AngeloGioacchino Del Regno <
>>> angelogioacchino.delregno@...labora.com>
>>> ---
>>> arch/arm64/boot/dts/mediatek/mt8195.dtsi | 25
>>> ++++++++++++++++++++++++
>>> 1 file changed, 25 insertions(+)
>>>
>>> diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
>>> b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
>>> index c380738d10cb..7acbef5a4517 100644
>>> --- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
>>> +++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
>>> @@ -1244,6 +1244,9 @@
>>> reg = <0x189 0x2>;
>>> bits = <7 5>;
>>> };
>>> + dp_calibration: dp-data@1ac {
>>> + reg = <0x1ac 0x10>;
>>> + };
>>> };
>>>
>>> u3phy2: t-phy@...40000 {
>>> @@ -2205,5 +2208,27 @@
>>> clock-names = "engine", "pixel", "pll";
>>> status = "disabled";
>>> };
>>> +
>>> + edp_tx: edp-tx@...00000 {
>>> + compatible = "mediatek,mt8195-edp-tx";
>>> + reg = <0 0x1c500000 0 0x8000>;
>>> + nvmem-cells = <&dp_calibration>;
>>> + nvmem-cell-names = "dp_calibration_data";
>>> + power-domains = <&spm
>>> MT8195_POWER_DOMAIN_EPD_TX>;
>>> + interrupts = <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH
>>> 0>;
>>> + max-linkrate-mhz = <8100>;
>>> + status = "disabled";
>>> + };
>>> +
>>> + dp_tx: dp-tx@...00000 {
>>> + compatible = "mediatek,mt8195-dp-tx";
>>> + reg = <0 0x1c600000 0 0x8000>;
>>> + nvmem-cells = <&dp_calibration>;
>>> + nvmem-cell-names = "dp_calibration_data";
>>> + power-domains = <&spm
>>> MT8195_POWER_DOMAIN_DP_TX>;
>>> + interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH
>>> 0>;
>>> + max-linkrate-mhz = <8100>;
>>> + status = "disabled";
>>> + };
>>
>> For some not really obvious reasons we get the following errors with
>> make CHECK_DTBS=1 mediatek/mt8195-cherry-tomato-r2.dtb
>>
>> arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dtb:0:0:
>> /soc/edp-tx@...00000: failed to match any schema with compatible:
>> ['mediatek,mt8195-edp-tx']
>> arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dtb:0:0:
>> /soc/dp-tx@...00000: failed to match any schema with compatible:
>> ['mediatek,mt8195-dp-tx']
>>
>> Can you please see how to fix this. Tested with next-20221111.
>>
>> Regards,
>> Matthias
>>
>
> Hello Matthias,
>
> I can not reproduce this issue in my local environment, but I am sure
> the binding is in kernel master branch (v6.1-rc5):
>
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/display/mediatek/mediatek,dp.yaml?h=v6.1-rc5
>
> It's strange that the message you provided said it can not find any
> schema with ['mediatek,mt8195-edp-tx'] and ['mediatek,mt8195-dp-tx'].
>
Matthias, I can't reproduce that either... perhaps there's something odd that's
going on with your environment?
Cheers
Powered by blists - more mailing lists