[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <13f01920-5a7c-65a4-7907-7116e365f18e@collabora.com>
Date: Tue, 15 Nov 2022 10:23:41 +0100
From: AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>
To: Bernhard Rosenkränzer <bero@...libre.com>,
linux-mediatek@...ts.infradead.org
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, matthias.bgg@...il.com
Subject: Re: [PATCH v2 01/15] arm64: dts: mediatek: Initial mt8365-evk support
Il 15/11/22 03:54, Bernhard Rosenkränzer ha scritto:
> From: Fabien Parent <fparent@...libre.com>
>
> This adds minimal support for the Mediatek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
>
> GPIO keys are supported, MMC is partially supported (needs the clocks
> driver for full support).
>
> Signed-off-by: Fabien Parent <fparent@...libre.com>
> [bero@...libre.com: Removed parts depending on drivers that aren't upstream yet, cleanups]
> Signed-off-by: Bernhard Rosenkränzer <bero@...libre.com>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 344 +++++++++++
> arch/arm64/boot/dts/mediatek/mt8365.dtsi | 601 ++++++++++++++++++++
> 3 files changed, 946 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 0ec90cb3ef289..e668fd50a3326 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -46,4 +46,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> new file mode 100644
> index 0000000000000..74e0f75231637
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -0,0 +1,344 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021-2022 BayLibre, SAS.
> + * Authors:
> + * Fabien Parent <fparent@...libre.com>
> + * Bernhard Rosenkränzer <bero@...libre.com>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
> +#include "mt8365.dtsi"
> +
> +/ {
> + model = "MediaTek MT8365 Open Platform EVK";
> + compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + input-name = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys>;
> +
> + key-volume-up {
> + gpios = <&pio 24 GPIO_ACTIVE_LOW>;
> + label = "volume_up";
> + linux,code = <KEY_VOLUMEUP>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> + };
> +
> + memory@...00000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0xc0000000>;
> + };
> +
> + usb_otg_vbus: regulator-0 {
> + compatible = "regulator-fixed";
> + regulator-name = "otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 12 MiB reserved for OP-TEE (BL32)
> + * +-----------------------+ 0x43e0_0000
> + * | SHMEM 2MiB |
> + * +-----------------------+ 0x43c0_0000
> + * | | TA_RAM 8MiB |
> + * + TZDRAM +--------------+ 0x4340_0000
> + * | | TEE_RAM 2MiB |
> + * +-----------------------+ 0x4320_0000
> + */
> + optee_reserved: optee@...00000 {
> + no-map;
> + reg = <0 0x43200000 0 0x00c00000>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + clock-frequency = <100000>;
> + status = "okay";
> +};
> +
> +&pio {
> + dpi_func_pins: dpi-func-pins {
> + pins {
> + pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
> + <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
> + <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
> + <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
> + <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
> + <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
> + <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
> + <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
> + <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
> + <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
> + <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
> + <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
> + <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
> + <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
> + <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
> + <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
> + drive-strength = <MTK_DRIVE_4mA>;
> + };
> + };
> +
> + dpi_idle_pins: dpi-idle-pins {
> + pins {
> + pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
> + <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
> + <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
> + <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
> + <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
> + <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
> + <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
> + <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
> + <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
> + <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
> + <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
> + <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
> + <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
> + <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
> + <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
> + <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
> + };
> + };
> +
> + gpio_keys: gpio-keys-pins {
> + pins {
> + pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
> + bias-pull-up;
> + input-enable;
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + pins {
> + pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
> + <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
> + mediatek,pull-up-adv = <3>;
> + mediatek,drive-strength-adv = <00>;
> + bias-pull-up;
> + };
> + };
> +
> + ite_pins: ite-pins {
> + pins-rst-ite {
> + pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
> + output-high;
> + };
> +
> + pins-irq-ite {
> + pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-pwr {
> + pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
> + <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
> + output-high;
> + };
> + };
> +
> + mmc0_pins_default: mmc0-default-pins {
> + pins-clk {
> + pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
> + bias-pull-down;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
> + <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
> + <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
> + <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
> + <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
> + <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
> + <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
> + <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
> + <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-rst {
> + pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
> + bias-pull-up;
> + };
> + };
> +
> + mmc0_pins_uhs: mmc0-uhs-pins {
> + pins-clk {
> + pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
> + drive-strength = <MTK_DRIVE_10mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
> + <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
> + <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
> + <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
> + <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
> + <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
> + <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
> + <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
> + <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_10mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins-ds {
> + pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
> + drive-strength = <MTK_DRIVE_10mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-rst {
> + pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
> + drive-strength = <MTK_DRIVE_10mA>;
> + bias-pull-up;
> + };
> + };
> +
> + mmc1_pins_default: mmc1-default-pins {
> + pins-cd {
> + pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
> + bias-pull-up;
> + };
> +
> + pins-clk {
> + pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
> + <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
> + <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
> + <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
> + <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
> + input-enable;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + mmc1_pins_uhs: mmc1-uhs-pins {
> + pins-clk {
> + pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
> + <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
> + <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
> + <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
> + <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + uart0_pins: uart0-pins {
> + pins {
> + pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
> + <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
> + };
> + };
> +
> + uart1_pins: uart1-pins {
> + pins {
> + pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
> + <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
> + };
> + };
> +
> + uart2_pins: uart2-pins {
> + pins {
> + pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
> + <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
> + };
> + };
> +
> + usb_pins: usb-pins {
> + pins-id {
> + pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-usb0-vbus {
> + pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
> + output-high;
> + };
> +
> + pin-usb1-vbus {
> + pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
> + output-high;
> + };
> + };
> +
> + pwm_pins: pwm-pins {
> + pins {
> + pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
> + <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
> + };
> + };
> +};
> +
> +&pwm {
> + pinctrl-0 = <&pwm_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-0 = <&uart0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-0 = <&uart1_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-0 = <&uart2_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> new file mode 100644
> index 0000000000000..1cf2172081b20
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -0,0 +1,601 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * (C) 2018 MediaTek Inc.
> + * Copyright (C) 2022 BayLibre SAS
> + * Fabien Parent <fparent@...libre.com>
> + * Bernhard Rosenkränzer <bero@...libre.com>
> + */
> +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + compatible = "mediatek,mt8365";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus: cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0: cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + };
> + };
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + #cooling-cells = <2>;
I don't see any CPU caches and I'm totally sure that this SoC does have
a unified 512KB unified L2 cache.
> + enable-method = "psci";
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + };
> + }; > +
> + clk26m: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
Does this SoC really not support any idle-state?! Seems pretty odd.
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
> + bl31_secmon_reserved: secmon@...00000 {
> + no-map;
> + reg = <0 0x43000000 0 0x20000>;
> + };
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller@...0000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x80000>,
> + <0 0x0c080000 0 0x80000>;
> +
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + topckgen: syscon@...00000 {
> + compatible = "mediatek,mt8365-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg: syscon@...01000 {
> + compatible = "mediatek,mt8365-infracfg", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pericfg: syscon@...03000 {
> + compatible = "mediatek,mt8365-pericfg", "syscon";
> + reg = <0 0x10003000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + syscfg_pctl: syscfg-pctl@...05000 {
> + compatible = "mediatek,mt8365-syscfg", "syscon";
> + reg = <0 0x10005000 0 0x1000>;
> + };
> +
> + watchdog: watchdog@...07000 {
> + compatible = "mediatek,mt8365-wdt",
> + "mediatek,mt6589-wdt";
83 cols is fine, fits in one line.
> + reg = <0 0x10007000 0 0x100>;
> + #reset-cells = <1>;
> + };
> +
> + gpt: apxgpt@...08000 {
This should be timer@...08000
> + compatible = "mediatek,mt8365-timer",
> + "mediatek,mt6577-timer";
> + reg = <0 0x10008000 0 0x1000>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
> + clock-names = "clk13m";
> + };
> +
..snip..
> +
> + infracfg: infracfg@...0e000 {
> + compatible = "mediatek,mt8365-infracfg", "syscon";
> + reg = <0 0x1020e000 0 0x1000>;
> + };
> +
> + rng: rng@...0f000 {
> + compatible = "mediatek,mt8365-rng",
> + "mediatek,mt7623-rng";
Fits in one line.
> + reg = <0 0x1020f000 0 0x100>;
> + clocks = <&infracfg CLK_IFR_TRNG>;
> + clock-names = "rng";
> + };
> +
..snip..
> +
> + uart0: serial@...02000 {
> + compatible = "mediatek,mt8365-uart",
> + "mediatek,mt6577-uart";
85 cols is probably fine, so this should fit in one line.
> + reg = <0 0x11002000 0 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
> + clock-names = "baud", "bus";
> + dmas = <&apdma 0>, <&apdma 1>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
..snip..
> +
> + i2c0: i2c@...07000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
Fits in one line.
> + reg = <0 0x11007000 0 0xa0>,
> + <0 0x11000080 0 0x80>;
Same.
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C0_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@...08000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
> + reg = <0 0x11008000 0 0xa0>,
> + <0 0x11000100 0 0x80>;
...again...
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C1_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@...09000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
> + reg = <0 0x11009000 0 0xa0>,
> + <0 0x11000180 0 0x80>;
...and again...
> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C2_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi: spi@...0a000 {
> + compatible = "mediatek,mt8365-spi",
> + "mediatek,mt7622-spi";
...and it's the same here again...
I'll stop saying the same at every instance, so please check the others :-)
> + reg = <0 0x1100a000 0 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
> + <&topckgen CLK_TOP_SPI_SEL>,
> + <&infracfg CLK_IFR_SPI0>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + status = "disabled";
> + };
> +
Regards,
Angelo
Powered by blists - more mailing lists