| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221115093823.2879128-2-joy.zou@nxp.com>
Date: Tue, 15 Nov 2022 17:38:22 +0800
From: Joy Zou <joy.zou@....com>
To: vkoul@...nel.org, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, shawnguo@...nel.org,
s.hauer@...gutronix.de, kernel@...gutronix.de, festevam@...il.com
Cc: shengjiu.wang@....com, martink@...teo.de, dev@...xeye.de,
alexander.stein@...tq-group.com, peng.fan@....com, david@...t.cz,
aford173@...il.com, hongxing.zhu@....com, linux-imx@....com,
dmaengine@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH v10 1/2] dt-bindings: fsl-imx-sdma: Convert imx sdma to DT schema
Convert the i.MX SDMA binding to DT schema format using json-schema.
The compatibles fsl,imx31-to1-sdma, fsl,imx31-to2-sdma, fsl,imx35-to1-sdma
and fsl,imx35-to2-sdma are not used. So need to delete it. The compatibles
fsl,imx50-sdma, fsl,imx6sll-sdma and fsl,imx6sl-sdma are added. The
original binding don't list all compatible used.
In addition, add new peripheral types HDMI Audio.
Signed-off-by: Joy Zou <joy.zou@....com>
---
Changes in v10:
change refernce the dma-common into dma-controller.
Changes in v9:
add the dma-common refernce.
delete the dma-controller refernce.
delete qoutes.
Changes in v8:
add the dma-controller refernce.
delete #dma-cells in required.
Changes in v6:
delete tag Acked-by from commit message.
Changes in v5:
modify the commit message fromat.
add additionalProperties, because delete the quotes in patch v4.
delete unevaluatedProperties due to similar to additionalProperties.
modification fsl,sdma-event-remap items and description.
Changes in v4:
modify the commit message.
delete the refernce in patch.
modify the compatible in patch.
delete maxitems and add items for clock-names property.
add iram property.
Changes in v3:
modify the commit message.
modify the filename.
modify the maintainer.
delete the unnecessary comment.
modify the compatible and run dt_binding_check and dtbs_check.
add clocks and clock-names property.
delete the reg description and add maxItems.
delete the interrupts description and add maxItems.
add ref for gpr property.
modify the fsl,sdma-event-remap ref type and add items.
delete consumer example.
Changes in v2:
convert imx sdma bindings to DT schema.
---
.../devicetree/bindings/dma/fsl,imx-sdma.yaml | 149 ++++++++++++++++++
.../devicetree/bindings/dma/fsl-imx-sdma.txt | 118 --------------
2 files changed, 149 insertions(+), 118 deletions(-)
create mode 100644 Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
delete mode 100644 Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
diff --git a/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
new file mode 100644
index 000000000000..b95dd8db5a30
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/fsl,imx-sdma.yaml
@@ -0,0 +1,149 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/fsl,imx-sdma.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
+
+maintainers:
+ - Joy Zou <joy.zou@....com>
+
+allOf:
+ - $ref: dma-controller.yaml#
+
+properties:
+ compatible:
+ oneOf:
+ - items:
+ - enum:
+ - fsl,imx50-sdma
+ - fsl,imx51-sdma
+ - fsl,imx53-sdma
+ - fsl,imx6q-sdma
+ - fsl,imx7d-sdma
+ - const: fsl,imx35-sdma
+ - items:
+ - enum:
+ - fsl,imx6sx-sdma
+ - fsl,imx6sl-sdma
+ - const: fsl,imx6q-sdma
+ - items:
+ - const: fsl,imx6ul-sdma
+ - const: fsl,imx6q-sdma
+ - const: fsl,imx35-sdma
+ - items:
+ - const: fsl,imx6sll-sdma
+ - const: fsl,imx6ul-sdma
+ - items:
+ - const: fsl,imx8mq-sdma
+ - const: fsl,imx7d-sdma
+ - items:
+ - enum:
+ - fsl,imx8mp-sdma
+ - fsl,imx8mn-sdma
+ - fsl,imx8mm-sdma
+ - const: fsl,imx8mq-sdma
+ - items:
+ - enum:
+ - fsl,imx25-sdma
+ - fsl,imx31-sdma
+ - fsl,imx35-sdma
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ fsl,sdma-ram-script-name:
+ $ref: /schemas/types.yaml#/definitions/string
+ description: Should contain the full path of SDMA RAM scripts firmware.
+
+ "#dma-cells":
+ const: 3
+ description: |
+ The first cell: request/event ID
+
+ The second cell: peripheral types ID
+ enum:
+ - MCU domain SSI: 0
+ - Shared SSI: 1
+ - MMC: 2
+ - SDHC: 3
+ - MCU domain UART: 4
+ - Shared UART: 5
+ - FIRI: 6
+ - MCU domain CSPI: 7
+ - Shared CSPI: 8
+ - SIM: 9
+ - ATA: 10
+ - CCM: 11
+ - External peripheral: 12
+ - Memory Stick Host Controller: 13
+ - Shared Memory Stick Host Controller: 14
+ - DSP: 15
+ - Memory: 16
+ - FIFO type Memory: 17
+ - SPDIF: 18
+ - IPU Memory: 19
+ - ASRC: 20
+ - ESAI: 21
+ - SSI Dual FIFO: 22
+ description: needs firmware more than ver 2
+ - Shared ASRC: 23
+ - SAI: 24
+ - HDMI Audio: 25
+
+ The third cell: transfer priority ID
+ enum:
+ - High: 0
+ - Medium: 1
+ - Low: 2
+
+ gpr:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle to the General Purpose Register (GPR) node
+
+ fsl,sdma-event-remap:
+ $ref: /schemas/types.yaml#/definitions/uint32-matrix
+ maxItems: 2
+ items:
+ items:
+ - description: GPR register offset
+ - description: GPR register shift
+ - description: GPR register value
+ description: |
+ Register bits of sdma event remap, the format is <reg shift val>.
+ The order is <RX>, <TX>.
+
+ clocks:
+ maxItems: 2
+
+ clock-names:
+ items:
+ - const: ipg
+ - const: ahb
+
+ iram:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: The phandle to the On-chip RAM (OCRAM) node.
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - fsl,sdma-ram-script-name
+
+additionalProperties: false
+
+examples:
+ - |
+ sdma: dma-controller@...b0000 {
+ compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
+ reg = <0x83fb0000 0x4000>;
+ interrupts = <6>;
+ #dma-cells = <3>;
+ fsl,sdma-ram-script-name = "sdma-imx51.bin";
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt b/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
deleted file mode 100644
index 12c316ff4834..000000000000
--- a/Documentation/devicetree/bindings/dma/fsl-imx-sdma.txt
+++ /dev/null
@@ -1,118 +0,0 @@
-* Freescale Smart Direct Memory Access (SDMA) Controller for i.MX
-
-Required properties:
-- compatible : Should be one of
- "fsl,imx25-sdma"
- "fsl,imx31-sdma", "fsl,imx31-to1-sdma", "fsl,imx31-to2-sdma"
- "fsl,imx35-sdma", "fsl,imx35-to1-sdma", "fsl,imx35-to2-sdma"
- "fsl,imx51-sdma"
- "fsl,imx53-sdma"
- "fsl,imx6q-sdma"
- "fsl,imx7d-sdma"
- "fsl,imx6ul-sdma"
- "fsl,imx8mq-sdma"
- "fsl,imx8mm-sdma"
- "fsl,imx8mn-sdma"
- "fsl,imx8mp-sdma"
- The -to variants should be preferred since they allow to determine the
- correct ROM script addresses needed for the driver to work without additional
- firmware.
-- reg : Should contain SDMA registers location and length
-- interrupts : Should contain SDMA interrupt
-- #dma-cells : Must be <3>.
- The first cell specifies the DMA request/event ID. See details below
- about the second and third cell.
-- fsl,sdma-ram-script-name : Should contain the full path of SDMA RAM
- scripts firmware
-
-The second cell of dma phandle specifies the peripheral type of DMA transfer.
-The full ID of peripheral types can be found below.
-
- ID transfer type
- ---------------------
- 0 MCU domain SSI
- 1 Shared SSI
- 2 MMC
- 3 SDHC
- 4 MCU domain UART
- 5 Shared UART
- 6 FIRI
- 7 MCU domain CSPI
- 8 Shared CSPI
- 9 SIM
- 10 ATA
- 11 CCM
- 12 External peripheral
- 13 Memory Stick Host Controller
- 14 Shared Memory Stick Host Controller
- 15 DSP
- 16 Memory
- 17 FIFO type Memory
- 18 SPDIF
- 19 IPU Memory
- 20 ASRC
- 21 ESAI
- 22 SSI Dual FIFO (needs firmware ver >= 2)
- 23 Shared ASRC
- 24 SAI
-
-The third cell specifies the transfer priority as below.
-
- ID transfer priority
- -------------------------
- 0 High
- 1 Medium
- 2 Low
-
-Optional properties:
-
-- gpr : The phandle to the General Purpose Register (GPR) node.
-- fsl,sdma-event-remap : Register bits of sdma event remap, the format is
- <reg shift val>.
- reg is the GPR register offset.
- shift is the bit position inside the GPR register.
- val is the value of the bit (0 or 1).
-
-Examples:
-
-sdma@...b0000 {
- compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
- reg = <0x83fb0000 0x4000>;
- interrupts = <6>;
- #dma-cells = <3>;
- fsl,sdma-ram-script-name = "sdma-imx51.bin";
-};
-
-DMA clients connected to the i.MX SDMA controller must use the format
-described in the dma.txt file.
-
-Examples:
-
-ssi2: ssi@...14000 {
- compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
- reg = <0x70014000 0x4000>;
- interrupts = <30>;
- clocks = <&clks 49>;
- dmas = <&sdma 24 1 0>,
- <&sdma 25 1 0>;
- dma-names = "rx", "tx";
- fsl,fifo-depth = <15>;
-};
-
-Using the fsl,sdma-event-remap property:
-
-If we want to use SDMA on the SAI1 port on a MX6SX:
-
-&sdma {
- gpr = <&gpr>;
- /* SDMA events remap for SAI1_RX and SAI1_TX */
- fsl,sdma-event-remap = <0 15 1>, <0 16 1>;
-};
-
-The fsl,sdma-event-remap property in this case has two values:
-- <0 15 1> means that the offset is 0, so GPR0 is the register of the
-SDMA remap. Bit 15 of GPR0 selects between UART4_RX and SAI1_RX.
-Setting bit 15 to 1 selects SAI1_RX.
-- <0 16 1> means that the offset is 0, so GPR0 is the register of the
-SDMA remap. Bit 16 of GPR0 selects between UART4_TX and SAI1_TX.
-Setting bit 16 to 1 selects SAI1_TX.
--
2.37.1
Powered by blists - more mailing lists