lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221115100820.rzp6eepqnc5ykxco@pengutronix.de>
Date:   Tue, 15 Nov 2022 11:08:20 +0100
From:   Marco Felsch <m.felsch@...gutronix.de>
To:     "Peng Fan (OSS)" <peng.fan@....nxp.com>
Cc:     shawnguo@...nel.org, s.hauer@...gutronix.de,
        Peng Fan <peng.fan@....com>, linux-kernel@...r.kernel.org,
        Haibo Chen <haibo.chen@....com>, linux-imx@....com,
        kernel@...gutronix.de, festevam@...il.com,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH V5 11/12] arm64: dts: imx8m[m, q]-evk: change to use
 off-on-delay-us in regulator

On 22-11-15, Peng Fan (OSS) wrote:
> From: Haibo Chen <haibo.chen@....com>
> 
> Some SD Card controller and power circuitry has increased capacitance,
> so the usual toggling of regulator to power the card off and on
> is insufficient.
> 
> According to SD spec, for sd card power reset operation, the sd card
> supply voltage needs to be lower than 0.5v and keep over 1ms, otherwise,
> next time power back the sd card supply voltage to 3.3v, sd card can't
> support SD3.0 mode again.
> 
> This patch add the off-on-delay-us, make sure the sd power reset behavior
> is align with the specification. Without this patch, when do quick system
> suspend/resume test, some sd card can't work at SD3.0 mode after system
> resume back.
> 
> Signed-off-by: Haibo Chen <haibo.chen@....com>
> Signed-off-by: Peng Fan <peng.fan@....com>

Reviewed-by: Marco Felsch <m.felsch@...gutronix.de>

> ---
>  arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi | 1 +
>  arch/arm64/boot/dts/freescale/imx8mq-evk.dts  | 1 +
>  2 files changed, 2 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> index 7d6317d95b13..f881494996a1 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
> @@ -56,6 +56,7 @@ reg_usdhc2_vmmc: regulator-usdhc2 {
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> +		off-on-delay-us = <20000>;
>  		enable-active-high;
>  	};
>  
> diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> index 82387b9cb800..07d9fb2aacf8 100644
> --- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> +++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
> @@ -46,6 +46,7 @@ reg_usdhc2_vmmc: regulator-vsd-3v3 {
>  		regulator-min-microvolt = <3300000>;
>  		regulator-max-microvolt = <3300000>;
>  		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
> +		off-on-delay-us = <20000>;
>  		enable-active-high;
>  	};
>  
> -- 
> 2.37.1
> 
> 
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ