linux-kernel - Re: [PATCH v8 net-next 0/2] mv88e6xxx: Add MAB offload support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20221115122237.jfa5aqv6hauqid6l@skbuf>
Date:   Tue, 15 Nov 2022 14:22:37 +0200
From:   Vladimir Oltean <olteanv@...il.com>
To:     netdev@...io-technology.com
Cc:     Ido Schimmel <idosch@...sch.org>, davem@...emloft.net,
        kuba@...nel.org, netdev@...r.kernel.org,
        Andrew Lunn <andrew@...n.ch>,
        Florian Fainelli <f.fainelli@...il.com>,
        Eric Dumazet <edumazet@...gle.com>,
        Paolo Abeni <pabeni@...hat.com>,
        open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v8 net-next 0/2] mv88e6xxx: Add MAB offload support

On Tue, Nov 15, 2022 at 12:31:59PM +0100, netdev@...io-technology.com wrote:
> It happens on upstart, so I would then have to hack the system upstart to
> add trace.

Hack upstart or disable the service that brings the switch ports up, and
bring them up manually...

> I also have:
> mv88e6085 1002b000.ethernet-1:04: switch 0x990 detected: Marvell 88E6097/88E6097F, revision 2
> mv88e6085 1002b000.ethernet-1:04: configuring for fixed/rgmii-id link mode
> mv88e6085 1002b000.ethernet-1:04: Link is Up - 100Mbps/Full - flow control off
> mv88e6085 1002b000.ethernet-1:04 eth10 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dio:00] driver [Generic PHY] (irq=POLL)
> mv88e6085 1002b000.ethernet-1:04 eth6 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dio:01] driver [Generic PHY] (irq=POLL)
> mv88e6085 1002b000.ethernet-1:04 eth9 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dio:02] driver [Generic PHY] (irq=POLL)
> mv88e6085 1002b000.ethernet-1:04 eth5 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dio:03] driver [Generic PHY] (irq=POLL)
> mv88e6085 1002b000.ethernet-1:04 eth8 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dio:04] driver [Generic PHY] (irq=POLL)
> mv88e6085 1002b000.ethernet-1:04 eth4 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dio:05] driver [Generic PHY] (irq=POLL)
> mv88e6085 1002b000.ethernet-1:04 eth7 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dio:06] driver [Generic PHY] (irq=POLL)
> mv88e6085 1002b000.ethernet-1:04 eth3 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dio:07] driver [Generic PHY] (irq=POLL)
> mv88e6085 1002b000.ethernet-1:04 eth2 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dioe:08] driver [Marvell 88E1112] (irq=174)
> mv88e6085 1002b000.ethernet-1:04 eth1 (uninitialized): PHY [!soc!aipi@...20000!ethernet@...2b000!mdio!switch@...dioe:09] driver [Marvell 88E1112] (irq=175)
> 
> after this and adding the ifaces to the bridge, it continues like:
> 
> br0: port 1(eth10) entered blocking state
> br0: port 1(eth10) entered disabled state
> br0: port 2(eth6) entered blocking state
> br0: port 2(eth6) entered disabled state
> device eth6 entered promiscuous mode
> device eth10 entered promiscuous mode
> br0: port 3(eth9) entered blocking state
> br0: port 3(eth9) entered disabled state
> device eth9 entered promiscuous mode
> br0: port 4(eth5) entered blocking state
> br0: port 4(eth5) entered disabled state
> device eth5 entered promiscuous mode
> br0: port 5(eth8) entered blocking state
> br0: port 5(eth8) entered disabled state
> device eth8 entered promiscuous mode
> br0: port 6(eth4) entered blocking state
> br0: port 6(eth4) entered disabled state
> mv88e6085 1002b000.ethernet-1:04: Timeout while waiting for switch
> mv88e6085 1002b000.ethernet-1:04: port 0 failed to add 9a:af:03:f1:bd:0a vid 1 to fdb: -110

Dumb question, but if you get errors like this, how can you test anything at all
in the patches that you submit?

> device eth4 entered promiscuous mode
> br0: port 7(eth7) entered blocking state
> br0: port 7(eth7) entered disabled state
> 
> I don't know if that gives ay clues...?

Not really. That error might be related - something indicating a breakage
in the top-level (fec IIUC) MDIO controller, or not. There was "recent"
rework almost everywhere.  For example commit 35da1dfd9484 ("net: dsa:
mv88e6xxx: Improve performance of busy bit polling"). That also hooks
into the mv88e6xxx cascaded MDIO controller (mv88e6xxx_g2_smi_phy_wait),
so there might be something there.

> 
> Otherwise I have to take more time to see what I can dig out. The easiest
> for me is then to add some printk statements giving targeted information if told what and
> where...

Do you have a timeline for when the regression was introduced?
Commit 35da1dfd9484 reverts cleanly, so I suppose giving it a go with
that reverted might be worth a shot. Otherwise, a bisect from a known
working version only takes a couple of hours, and shouldn't require
other changes to the setup.