[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221115132811.GA4189373@roeck-us.net>
Date: Tue, 15 Nov 2022 05:28:11 -0800
From: Guenter Roeck <linux@...ck-us.net>
To: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Wim Van Sebroeck <wim@...ux-watchdog.org>,
Geert Uytterhoeven <geert+renesas@...der.be>,
Magnus Damm <magnus.damm@...il.com>,
Biju Das <biju.das.jz@...renesas.com>,
linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-watchdog@...r.kernel.org,
Chris Paterson <Chris.Paterson2@...esas.com>,
Biju Das <biju.das@...renesas.com>,
Fabrizio Castro <fabrizio.castro@...renesas.com>,
Laurent Pinchart <laurent.pinchart@...asonboard.com>,
Jacopo Mondi <jacopo@...ndi.org>
Subject: Re: [PATCH 1/3] watchdog: rzg2l_wdt: Fix reboot for RZ/V2M
On Thu, Nov 03, 2022 at 10:39:54PM +0000, Fabrizio Castro wrote:
> The setting for the RZ/V2M watchdog cannot be changed once
> the watchdog has been enabled, unless the IP gets reset.
> The current implementation of the restart callback assumes
> that the watchdog is not enabled, but that's not always the
> case, and it leads to longer than necessary reboot times if
> the watchdog is already running.
>
> Always reset the RZ/V2M watchdog first, so that we can always
> restart quickly.
>
> Fixes: ec122fd94eeb ("watchdog: rzg2l_wdt: Add rzv2m support")
> Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@...esas.com>
Reviewed-by: Guenter Roeck <linux@...ck-us.net>
> ---
> drivers/watchdog/rzg2l_wdt.c | 11 ++++++++---
> 1 file changed, 8 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/watchdog/rzg2l_wdt.c b/drivers/watchdog/rzg2l_wdt.c
> index 974a4194a8fd..00438ceed17a 100644
> --- a/drivers/watchdog/rzg2l_wdt.c
> +++ b/drivers/watchdog/rzg2l_wdt.c
> @@ -145,10 +145,10 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev,
> {
> struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
>
> - clk_prepare_enable(priv->pclk);
> - clk_prepare_enable(priv->osc_clk);
> -
> if (priv->devtype == WDT_RZG2L) {
> + clk_prepare_enable(priv->pclk);
> + clk_prepare_enable(priv->osc_clk);
> +
> /* Generate Reset (WDTRSTB) Signal on parity error */
> rzg2l_wdt_write(priv, 0, PECR);
>
> @@ -157,6 +157,11 @@ static int rzg2l_wdt_restart(struct watchdog_device *wdev,
> } else {
> /* RZ/V2M doesn't have parity error registers */
>
> + reset_control_reset(priv->rstc);
> +
> + clk_prepare_enable(priv->pclk);
> + clk_prepare_enable(priv->osc_clk);
> +
> wdev->timeout = 0;
>
> /* Initialize time out */
> --
> 2.34.1
>
Powered by blists - more mailing lists