| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221115152727.9736-6-konrad.dybcio@linaro.org>
Date: Tue, 15 Nov 2022 16:27:23 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: linux-arm-msm@...r.kernel.org, andersson@...nel.org,
agross@...nel.org, krzysztof.kozlowski@...aro.org
Cc: patches@...aro.org, Konrad Dybcio <konrad.dybcio@...aro.org>,
Konrad Dybcio <konrad.dybcio@...ainline.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: [PATCH v3 5/9] arm64: dts: qcom: sm6375: Add QUPs and corresponding SPI/I2C hosts
Add necessary nodes to support various QUP configurations. Note that:
- QUP3/4/5 and 11 are straight up missing
- There may be more QUPs physically on the SoC that work perfectly
fine, but Qualcomm decided not to expose them on the downstream kernel
- Many are missing pinctrls, as there are both missing pin funcs in
the TLMM driver and missing configuration settings (though they are
possible to guesstimate quite easily)
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
arch/arm64/boot/dts/qcom/sm6375.dtsi | 306 +++++++++++++++++++++++++++
1 file changed, 306 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6375.dtsi b/arch/arm64/boot/dts/qcom/sm6375.dtsi
index 952156891476..6adffd927a8e 100644
--- a/arch/arm64/boot/dts/qcom/sm6375.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6375.dtsi
@@ -5,6 +5,7 @@
#include <dt-bindings/clock/qcom,rpmcc.h>
#include <dt-bindings/clock/qcom,sm6375-gcc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/mailbox/qcom-ipcc.h>
#include <dt-bindings/power/qcom-rpmpd.h>
@@ -317,6 +318,25 @@ CLUSTER_PD: cpu-cluster0 {
};
};
+ qup_opp_table: opp-table-qup {
+ compatible = "operating-points-v2";
+
+ opp-75000000 {
+ opp-hz = /bits/ 64 <75000000>;
+ required-opps = <&rpmpd_opp_low_svs>;
+ };
+
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ required-opps = <&rpmpd_opp_svs>;
+ };
+
+ opp-128000000 {
+ opp-hz = /bits/ 64 <128000000>;
+ required-opps = <&rpmpd_opp_nom>;
+ };
+ };
+
reserved_memory: reserved-memory {
#address-cells = <2>;
#size-cells = <2>;
@@ -630,6 +650,125 @@ gpi_dma0: dma-controller@...0000 {
status = "disabled";
};
+ qupv3_id_0: geniqup@...0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x04ac0000 0x0 0x2000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_0_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_0_S_AHB_CLK>;
+ iommus = <&apps_smmu 0x3 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c0: i2c@...0000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x04a80000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c0_default>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi0: spi@...0000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x04a80000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S0_CLK>;
+ interrupts = <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_spi0_default>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@...4000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x04a84000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c1_default>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi1: spi@...4000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x04a84000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S1_CLK>;
+ interrupts = <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@...8000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x04a88000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c2_default>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi2: spi@...8000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x04a88000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP0_S2_CLK>;
+ interrupts = <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ /*
+ * As per GCC, QUP3/4/5/11 also exist, but are not even defined downstream.
+ * There is a comment in the included DTSI of another SoC saying that they
+ * are not "bolled out" (probably meaning not routed to solder balls)
+ * TLMM driver however, suggests there are as many as 15 QUPs in total!
+ * Most of which don't even have pin configurations for.. Sad stuff!
+ */
+ };
+
gpi_dma1: dma-controller@...0000 {
compatible = "qcom,sm6375-gpi-dma", "qcom,sm6350-gpi-dma";
reg = <0 0x04c00000 0 0x60000>;
@@ -650,6 +789,173 @@ gpi_dma1: dma-controller@...0000 {
status = "disabled";
};
+ qupv3_id_1: geniqup@...0000 {
+ compatible = "qcom,geni-se-qup";
+ reg = <0x0 0x04cc0000 0x0 0x2000>;
+ clock-names = "m-ahb", "s-ahb";
+ clocks = <&gcc GCC_QUPV3_WRAP_1_M_AHB_CLK>,
+ <&gcc GCC_QUPV3_WRAP_1_S_AHB_CLK>;
+ iommus = <&apps_smmu 0xc3 0x0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ i2c6: i2c@...0000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x04c80000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi6: spi@...0000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x04c80000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
+ interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c7: i2c@...4000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x04c84000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi7: spi@...4000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x04c84000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
+ interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c8: i2c@...8000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x04c88000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c8_default>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi8: spi@...8000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x04c88000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
+ interrupts = <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c9: i2c@...c000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x04c8c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi9: spi@...c000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x04c8c000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
+ interrupts = <GIC_SPI 510 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c10: i2c@...0000 {
+ compatible = "qcom,geni-i2c";
+ reg = <0x0 0x04c90000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&qup_i2c10_default>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+ <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi10: spi@...0000 {
+ compatible = "qcom,geni-spi";
+ reg = <0x0 0x04c90000 0x0 0x4000>;
+ clock-names = "se";
+ clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
+ interrupts = <GIC_SPI 511 IRQ_TYPE_LEVEL_HIGH>;
+ power-domains = <&rpmpd SM6375_VDDCX>;
+ operating-points-v2 = <&qup_opp_table>;
+ dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+ <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+ };
+
usb_1: usb@...8800 {
compatible = "qcom,sm6375-dwc3", "qcom,dwc3";
reg = <0 0x04ef8800 0 0x400>;
--
2.38.1
Powered by blists - more mailing lists