linux-kernel - RE: [PATCH V1 1/1] mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <SN1PR16MB22551227277A186B79ECA225F1079@SN1PR16MB2255.namprd16.prod.outlook.com>
Date:   Wed, 16 Nov 2022 06:04:43 +0000
From:   "Louis Lu(TP)" <louis.lu@...hubtech.com>
To:     Ulf Hansson <ulf.hansson@...aro.org>,
        "Chevron Li (WH)" <chevron.li@...hubtech.com>
CC:     "adrian.hunter@...el.com" <adrian.hunter@...el.com>,
        "linux-mmc@...r.kernel.org" <linux-mmc@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "Shaper Liu (WH)" <shaper.liu@...hubtech.com>,
        "XiaoGuang Yu (WH)" <xiaoguang.yu@...hubtech.com>,
        "Shirley Her(SC)" <shirley.her@...hubtech.com>
Subject: RE: [PATCH V1 1/1] mmc: sdhci-pci-o2micro: fix card detect fail issue
 caused by CD# debounce timeout

Hi Uffe,

May we check when this update patched will be phased in?

Thanks,
Best Regards,
Louis Lu

-----Original Message-----
From: Ulf Hansson <ulf.hansson@...aro.org> 
Sent: Tuesday, November 8, 2022 4:13 AM
To: Chevron Li (WH) <chevron.li@...hubtech.com>
Cc: adrian.hunter@...el.com; linux-mmc@...r.kernel.org; linux-kernel@...r.kernel.org; Shaper Liu (WH) <shaper.liu@...hubtech.com>; XiaoGuang Yu (WH) <xiaoguang.yu@...hubtech.com>; Shirley Her(SC) <shirley.her@...hubtech.com>; Louis Lu(TP) <louis.lu@...hubtech.com>
Subject: Re: [PATCH V1 1/1] mmc: sdhci-pci-o2micro: fix card detect fail issue caused by CD# debounce timeout

On Fri, 4 Nov 2022 at 10:55, Chevron Li <chevron.li@...hubtech.com> wrote:
>
> The SD card is recognized failed sometimes when resume from suspend.
> Because CD# debounce time too long then card present report wrong.
> Finally, card is recognized failed.
>
> Signed-off-by: Chevron Li <chevron.li@...hubtech.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
> Change in V1:
> Adjust bayhub chip setting for CD# debounce time to minimum value
> ---
>  drivers/mmc/host/sdhci-pci-o2micro.c | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/drivers/mmc/host/sdhci-pci-o2micro.c b/drivers/mmc/host/sdhci-pci-o2micro.c
> index ad457cd9cbaa..bca1d095b759 100644
> --- a/drivers/mmc/host/sdhci-pci-o2micro.c
> +++ b/drivers/mmc/host/sdhci-pci-o2micro.c
> @@ -32,6 +32,7 @@
>  #define O2_SD_CAPS             0xE0
>  #define O2_SD_ADMA1            0xE2
>  #define O2_SD_ADMA2            0xE7
> +#define O2_SD_MISC_CTRL2       0xF0
>  #define O2_SD_INF_MOD          0xF1
>  #define O2_SD_MISC_CTRL4       0xFC
>  #define O2_SD_MISC_CTRL                0x1C0
> @@ -877,6 +878,12 @@ static int sdhci_pci_o2_probe(struct sdhci_pci_chip *chip)
>                 /* Set Tuning Windows to 5 */
>                 pci_write_config_byte(chip->pdev,
>                                 O2_SD_TUNING_CTRL, 0x55);
> +               //Adjust 1st and 2nd CD debounce time
> +               pci_read_config_dword(chip->pdev, O2_SD_MISC_CTRL2, &scratch_32);
> +               scratch_32 &= 0xFFE7FFFF;
> +               scratch_32 |= 0x00180000;
> +               pci_write_config_dword(chip->pdev, O2_SD_MISC_CTRL2, scratch_32);
> +               pci_write_config_dword(chip->pdev, O2_SD_DETECT_SETTING, 1);
>                 /* Lock WP */
>                 ret = pci_read_config_byte(chip->pdev,
>                                            O2_SD_LOCK_WP, &scratch);
>
> base-commit: ee6050c8af96bba2f81e8b0793a1fc2f998fcd20
> --
> 2.25.1
>