linux-kernel - [PATCH net-next v3 3/5] net: ipa: introduce "qcom,gsi-loader" property

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20221116073257.34010-4-elder@linaro.org>
Date:   Wed, 16 Nov 2022 01:32:54 -0600
From:   Alex Elder <elder@...aro.org>
To:     robh+dt@...nel.org, krzysztof.kozlowski+dt@...aro.org,
        davem@...emloft.net, edumazet@...gle.com, kuba@...nel.org,
        pabeni@...hat.com
Cc:     andersson@...nel.org, konrad.dybcio@...aro.org, agross@...nel.org,
        elder@...nel.org, linux-arm-msm@...r.kernel.org,
        netdev@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH net-next v3 3/5] net: ipa: introduce "qcom,gsi-loader" property

Introduce a new way of specifying how the GSI firmware gets loaded
for IPA.  Currently, this is indicated by the presence or absence of
the Boolean "modem-init" Device Tree property.  The new property
must have a value--either "self" or "modem"--which indicates whether
the AP or modem is the GSI firmware loader, respectively.

For legacy systems, the new property will not exist, and the
"modem-init" property will be used.  For newer systems, the
"qcom,gsi-loader" property *must* exist, and must have one of the
two prescribed values.  It is an error to have both properties
defined, and it is an error for the new property to have an
unrecognized value.

Signed-off-by: Alex Elder <elder@...aro.org>
---
 drivers/net/ipa/ipa_main.c | 44 ++++++++++++++++++++++++++++++++------
 1 file changed, 37 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ipa/ipa_main.c b/drivers/net/ipa/ipa_main.c
index 9e43b79d233e9..214e524dce795 100644
--- a/drivers/net/ipa/ipa_main.c
+++ b/drivers/net/ipa/ipa_main.c
@@ -87,11 +87,13 @@
  * @IPA_LOADER_DEFER:		System not ready; try again later
  * @IPA_LOADER_SELF:		AP loads GSI firmware
  * @IPA_LOADER_MODEM:		Modem loads GSI firmware, signals when done
+ * @IPA_LOADER_INVALID:	GSI firmware loader specification is invalid
  */
 enum ipa_firmware_loader {
 	IPA_LOADER_DEFER,
 	IPA_LOADER_SELF,
 	IPA_LOADER_MODEM,
+	IPA_LOADER_INVALID,
 };
 
 /**
@@ -711,9 +713,37 @@ static void ipa_validate_build(void)
 
 static enum ipa_firmware_loader ipa_firmware_loader(struct device *dev)
 {
-	if (of_property_read_bool(dev->of_node, "modem-init"))
+	bool modem_init;
+	const char *str;
+	int ret;
+
+	/* Look up the old and new properties by name */
+	modem_init = of_property_read_bool(dev->of_node, "modem-init");
+	ret = of_property_read_string(dev->of_node, "qcom,gsi-loader", &str);
+
+	/* If the new property doesn't exist, it's legacy behavior */
+	if (ret == -EINVAL) {
+		if (modem_init)
+			return IPA_LOADER_MODEM;
+		goto out_self;
+	}
+
+	/* Any other error on the new property means it's poorly defined */
+	if (ret)
+		return IPA_LOADER_INVALID;
+
+	/* New property value exists; if old one does too, that's invalid */
+	if (modem_init)
+		return IPA_LOADER_INVALID;
+
+	/* Modem loads GSI firmware for "modem" */
+	if (!strcmp(str, "modem"))
 		return IPA_LOADER_MODEM;
 
+	/* Any value other than "self" is an error */
+	if (strcmp(str, "self"))
+		return IPA_LOADER_INVALID;
+out_self:
 	/* We need Trust Zone to load firmware; make sure it's available */
 	if (qcom_scm_is_available())
 		return IPA_LOADER_SELF;
@@ -773,6 +803,8 @@ static int ipa_probe(struct platform_device *pdev)
 	}
 
 	loader = ipa_firmware_loader(dev);
+	if (loader == IPA_LOADER_INVALID)
+		return -EINVAL;
 	if (loader == IPA_LOADER_DEFER)
 		return -EPROBE_DEFER;
 
@@ -834,20 +866,18 @@ static int ipa_probe(struct platform_device *pdev)
 
 	dev_info(dev, "IPA driver initialized");
 
-	/* If the modem is doing early initialization, it will trigger a
-	 * call to ipa_setup() when it has finished.  In that case we're
-	 * done here.
+	/* If the modem is loading GSI firmware, it will trigger a call to
+	 * ipa_setup() when it has finished.  In that case we're done here.
 	 */
 	if (loader == IPA_LOADER_MODEM)
 		goto done;
 
-	/* Otherwise we need to load the firmware and have Trust Zone validate
-	 * and install it.  If that succeeds we can proceed with setup.
-	 */
+	/* The AP is loading GSI firmware; do so now */
 	ret = ipa_firmware_load(dev);
 	if (ret)
 		goto err_deconfig;
 
+	/* GSI firmware is loaded; proceed to setup */
 	ret = ipa_setup(ipa);
 	if (ret)
 		goto err_deconfig;
-- 
2.34.1