[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <7bb5e9ee-358b-ce6f-2cb5-a6b6b558c0a9@amlogic.com>
Date: Wed, 16 Nov 2022 17:56:12 +0800
From: Jiucheng Xu <jiucheng.xu@...ogic.com>
To: Bagas Sanjaya <bagasdotme@...il.com>
CC: <linux-doc@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-amlogic@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
Jonathan Corbet <corbet@....net>,
Will Deacon <will@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Neil Armstrong <neil.armstrong@...aro.org>,
Kevin Hilman <khilman@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Martin Blumenstingl <martin.blumenstingl@...glemail.com>,
Shuai Xue <xueshuai@...ux.alibaba.com>,
John Garry <john.garry@...wei.com>,
Wan Jiabing <wanjiabing@...o.com>,
Chris Healy <cphealy@...il.com>,
Jianxin Pan <jianxin.pan@...ogic.com>,
Kelvin Zhang <kelvin.zhang@...ogic.com>,
Chris Healy <healych@...zon.com>
Subject: Re: [PATCH v10 2/2] docs/perf: Add documentation for the Amlogic G12
DDR PMU
Sorry for my poor English. Your writing looks very elegant. I will apply
your modification in next version.
Thanks,
Jiucheng
On 2022/11/16 17:40, Bagas Sanjaya wrote:
>
> The wordings are rather weird, so I need to improve the doc:
>
> ---- >8 ----
>
> diff --git a/Documentation/admin-guide/perf/meson-ddr-pmu.rst b/Documentation/admin-guide/perf/meson-ddr-pmu.rst
> index 15e93a751ced8a..4a1fdb5aba4b24 100644
> --- a/Documentation/admin-guide/perf/meson-ddr-pmu.rst
> +++ b/Documentation/admin-guide/perf/meson-ddr-pmu.rst
> @@ -4,11 +4,12 @@
> Amlogic SoC DDR Bandwidth Performance Monitoring Unit (PMU)
> ===========================================================
>
> -There is a bandwidth monitor inside the DRAM controller. The monitor includes
> -4 channels which can count the read/write request of accessing DRAM individually.
> -It can be helpful to show if the performance bottleneck is on DDR bandwidth.
> +The Amlogic Meson G12 SoC contains a bandwidth monitor inside DRAM controller.
> +The monitor includes 4 channels which can count the read/write request of
> +individual DRAM. It can be helpful to show if the performance bottleneck is on
> +DDR bandwidth.
>
> -Currently, this driver supports the following 5 Perf events:
> +Currently, this driver supports the following 5 perf events:
>
> + meson_ddr_bw/total_rw_bytes/
> + meson_ddr_bw/chan_1_rw_bytes/
> @@ -16,55 +17,54 @@ Currently, this driver supports the following 5 Perf events:
> + meson_ddr_bw/chan_3_rw_bytes/
> + meson_ddr_bw/chan_4_rw_bytes/
>
> -meson_ddr_bw/chan_{1,2,3,4}_rw_bytes/ events are the channel related events.
> -Each channel support using keywords as filter, which can let the channel
> -to monitor the individual IP module in SoC.
> +meson_ddr_bw/chan_{1,2,3,4}_rw_bytes/ events are channel-specific events.
> +Each channel support filtering, which can let the channel to monitor
> +individual IP module in SoC.
>
> -The following keywords are the filter:
> +Below are DDR access request event filter keywords:
>
> -+ arm - DDR access request from CPU
> -+ vpu_read1 - DDR access request from OSD + VPP read
> -+ gpu - DDR access request from 3D GPU
> -+ pcie - DDR access request from PCIe controller
> -+ hdcp - DDR access request from HDCP controller
> -+ hevc_front - DDR access request from HEVC codec front end
> -+ usb3_0 - DDR access request from USB3.0 controller
> -+ hevc_back - DDR access request from HEVC codec back end
> -+ h265enc - DDR access request from HEVC encoder
> -+ vpu_read2 - DDR access request from DI read
> -+ vpu_write1 - DDR access request from VDIN write
> -+ vpu_write2 - DDR access request from di write
> -+ vdec - DDR access request from legacy codec video decoder
> -+ hcodec - DDR access request from H264 encoder
> -+ ge2d - DDR access request from ge2d
> -+ spicc1 - DDR access request from SPI controller 1
> -+ usb0 - DDR access request from USB2.0 controller 0
> -+ dma - DDR access request from system DMA controller 1
> -+ arb0 - DDR access request from arb0
> -+ sd_emmc_b - DDR access request from SD eMMC b controller
> -+ usb1 - DDR access request from USB2.0 controller 1
> -+ audio - DDR access request from Audio module
> -+ sd_emmc_c - DDR access request from SD eMMC c controller
> -+ spicc2 - DDR access request from SPI controller 2
> -+ ethernet - DDR access request from Ethernet controller
> ++ arm - from CPU
> ++ vpu_read1 - from OSD + VPP read
> ++ gpu - from 3D GPU
> ++ pcie - from PCIe controller
> ++ hdcp - from HDCP controller
> ++ hevc_front - from HEVC codec front end
> ++ usb3_0 - from USB3.0 controller
> ++ hevc_back - from HEVC codec back end
> ++ h265enc - from HEVC encoder
> ++ vpu_read2 - from DI read
> ++ vpu_write1 - from VDIN write
> ++ vpu_write2 - from di write
> ++ vdec - from legacy codec video decoder
> ++ hcodec - from H264 encoder
> ++ ge2d - from ge2d
> ++ spicc1 - from SPI controller 1
> ++ usb0 - from USB2.0 controller 0
> ++ dma - from system DMA controller 1
> ++ arb0 - from arb0
> ++ sd_emmc_b - from SD eMMC b controller
> ++ usb1 - from USB2.0 controller 1
> ++ audio - from Audio module
> ++ sd_emmc_c - from SD eMMC c controller
> ++ spicc2 - from SPI controller 2
> ++ ethernet - from Ethernet controller
>
>
> -The following command is to show the total DDR bandwidth:
> +Examples:
>
> - .. code-block:: bash
> + + Show the total DDR bandwidth per seconds:
>
> - perf stat -a -e meson_ddr_bw/total_rw_bytes/ -I 1000 sleep 10
> + .. code-block:: bash
>
> -This command will print the total DDR bandwidth per second.
> + perf stat -a -e meson_ddr_bw/total_rw_bytes/ -I 1000 sleep 10
>
> -The following commands are to show how to use filter parameters:
>
> - .. code-block:: bash
> + + Show individual DDR bandwidth from CPU and GPU respectively, as well as
> + sum of them:
>
> - perf stat -a -e meson_ddr_bw/chan_1_rw_bytes,arm=1/ -I 1000 sleep 10
> - perf stat -a -e meson_ddr_bw/chan_2_rw_bytes,gpu=1/ -I 1000 sleep 10
> - perf stat -a -e meson_ddr_bw/chan_3_rw_bytes,arm=1,gpu=1/ -I 1000 sleep 10
> + .. code-block:: bash
> +
> + perf stat -a -e meson_ddr_bw/chan_1_rw_bytes,arm=1/ -I 1000 sleep 10
> + perf stat -a -e meson_ddr_bw/chan_2_rw_bytes,gpu=1/ -I 1000 sleep 10
> + perf stat -a -e meson_ddr_bw/chan_3_rw_bytes,arm=1,gpu=1/ -I 1000 sleep 10
>
> -The 1st command show how to use channel 1 to monitor the DDR bandwidth from ARM.
> -The 2nd command show using channel 2 to get the DDR bandwidth of GPU.
> -The 3rd command show using channel 3 to monitor the sum of ARM and GPU.
>
> Thanks.
>
--
Thanks,
Jiucheng
Powered by blists - more mailing lists