| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221116123612.34302-3-konrad.dybcio@linaro.org>
Date: Wed, 16 Nov 2022 13:36:11 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: linux-arm-msm@...r.kernel.org, andersson@...nel.org,
agross@...nel.org, krzysztof.kozlowski@...aro.org
Cc: patches@...aro.org, Konrad Dybcio <konrad.dybcio@...aro.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Bhupesh Sharma <bhupesh.sharma@...aro.org>,
linux-mmc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
Konrad Dybcio <konrad.dybcio@...ainline.org>
Subject: [PATCH v2 3/4] arm64: dts: qcom: sm8350-sagami: Add GPIO line names for TLMM
Sony ever so graciously provides GPIO line names in their downstream
kernel (though sometimes they are not 100% accurate and you can judge
that by simply looking at them and with what drivers they are used).
Add these to the Sagami-common / PDX215 DTSIs to better document the
hardware.
Diff between 215 and common:
< "NC",
< "NC",
> "WLC_I2C_SDA",
> "WLC_I2C_SCL",
< "NC",
> "WLC_INT_N",
> "CAM_MCLK4",
< "NC",
< "NC",
> "TOF_RST_N",
< "NC",
< "NC",
< "NC",
> "QLINK1_REQ",
> "QLINK1_EN",
> "QLINK1_WMSS_RESET_N",
It's pretty logical as 1 III has WLC (WireLess Charging), and an
additional 3D iToF sensor. As for QLINK, no idea.
Signed-off-by: Konrad Dybcio <konrad.dybcio@...aro.org>
---
No changes in v2.
.../qcom/sm8350-sony-xperia-sagami-pdx215.dts | 206 ++++++++++++++++++
.../dts/qcom/sm8350-sony-xperia-sagami.dtsi | 203 +++++++++++++++++
2 files changed, 409 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
index d21bbeb603a6..c74c973a69d2 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami-pdx215.dts
@@ -11,3 +11,209 @@ / {
model = "Sony Xperia 1 III";
compatible = "sony,pdx215-generic", "qcom,sm8350";
};
+
+&tlmm {
+ gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+ "APPS_I2C_0_SCL",
+ "UWIDEC_PWR_EN",
+ "HAP_RST_N",
+ "WLC_I2C_SDA",
+ "WLC_I2C_SCL",
+ "PM8008_1_RESET_N",
+ "WLC_INT_N",
+ "OIS_TELE_I2C_SDA",
+ "OIS_TELE_I2C_SCL",
+ "PM8350_OPTION", /* GPIO_10 */
+ "NC",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "NC",
+ "CAM1_RESET_N",
+ "LEO_CAM0_RESET_N",
+ "DEBUG_UART_TX",
+ "DEBUG_UART_RX",
+ "TS_I2C_SDA", /* GPIO_20 */
+ "TS_I2C_SCL",
+ "TS_RESET_N",
+ "TS_INT_N",
+ "DISP_RESET_N",
+ "SW_SERVICE",
+ "DISP_ERR_FG",
+ "TX_GTR_THRES_IN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_30 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SPK_AMP_INT_N",
+ "SPK_AMP_RESET_N",
+ "FP_INT_N",
+ "FP_RESET_N",
+ "NC", /* GPIO_40 */
+ "NC",
+ "DEBUG_GPIO0",
+ "FORCE_USB_BOOT",
+ "FP_SPI_MISO",
+ "FP_SPI_MOSI",
+ "FP_SPI_CLK",
+ "FP_SPI_CS_N",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC", /* GPIO_50 */
+ "HAP_INT_N",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "SBU_SW_OE",
+ "SBU_SW_SEL",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_CLK",
+ "NFC_ESE_SPI_CS",
+ "NFC_I2C_SDA", /* GPIO_60 */
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "HST_WLAN_EN",
+ "HST_BT_EN",
+ "HW_ID_0",
+ "HW_ID_1",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX", /* GPIO_70 */
+ "HST_BT_UART_RX",
+ "HAP_I2C_SDA",
+ "HAP_I2C_SCL",
+ "RF_LCD_ID_EN",
+ "RF_ID_EXTENSION",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HALL_INT_N", /* GPIO_80 */
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_SOF_TELE",
+ "NFC_DWL_REQ",
+ "NFC_IRQ",
+ "WCD_RST_N",
+ "ALS_PROX_INT_N",
+ "NC", /* GPIO_90 */
+ "NC",
+ "TRAY_DET",
+ "UDON_SWITCH_SEL",
+ "PCIE0_RESET_N",
+ "PCIE0_CLK_REQ_N",
+ "PCIE0_WAKE_N",
+ "CAM_SOF",
+ "RF_ID_EXTENSION_2",
+ "RGBC_IR_INT",
+ "CAM_MCLK0", /* GPIO_100 */
+ "CAM_MCLK1",
+ "CAM_MCLK2",
+ "CAM_MCLK3",
+ "CAM_MCLK4",
+ "NC",
+ "CAM2_RESET_N",
+ "CCI_I2C0_SDA",
+ "CCI_I2C0_SCL",
+ "CCI_I2C1_SDA",
+ "CCI_I2C1_SCL", /* GPIO_110 */
+ "CCI_I2C2_SDA",
+ "CCI_I2C2_SCL",
+ "CCI_I2C3_SDA",
+ "CCI_I2C3_SCL",
+ "NC",
+ "PM8008_1_IRQ",
+ "CAM3_RESET_N",
+ "IMU1_INT",
+ "EXT_VD0_XVS",
+ "NC", /* GPIO_120 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HAP_I2S_CLK",
+ "HAP_I2S_DOUT",
+ "HAP_TRG1",
+ "HAP_I2S_SYNC",
+ "HST_BT_WLAN_SLIMBUS_CLK",
+ "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+ "NC",
+ "UIM2_DETECT_EN",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RESET",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RESET",
+ "TRAY_DET", /* GPIO_140 */
+ "SM_RFFE0_CLK",
+ "SM_RFFE0_DATA",
+ "SM_RFFE1_CLK",
+ "SM_RFFE1_DATA",
+ "SM_MSS_GRFC4",
+ "SM_MSS_GRFC5",
+ "SM_MSS_GRFC6",
+ "SM_MSS_GRFC7",
+ "SM_RFFE4_CLK",
+ "SM_RFFE4_DATA", /* GPIO_150 */
+ "WLAN_COEX_UART1_RX",
+ "WLAN_COEX_UART1_TX",
+ "HST_SW_CTRL",
+ "DISP_VDDR_EN",
+ "NC",
+ "NC",
+ "PA_INDICATOR_OR",
+ "TOF_RST_N",
+ "QLINK0_REQ",
+ "QLINK0_EN", /* GPIO_160 */
+ "QLINK0_WMSS_RESET_N",
+ "QLINK1_REQ",
+ "QLINK1_EN",
+ "QLINK1_WMSS_RESET_N",
+ "PM8008_2_IRQ",
+ "TELEC_PWR_EN",
+ "PM8008_2_RESET_N",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1", /* GPIO_170 */
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0",
+ "WCD_SWR_RX_DATA1",
+ "SM_DMIC1_CLK",
+ "SM_DMIC1_DATA",
+ "SM_DMIC2_CLK",
+ "SM_DMIC2_DATA",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+ "SPK_AMP_I2S_ASP_DOUT",
+ "WCD_SWR_TX_DATA2",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "IMU_SPI_MISO",
+ "IMU_SPI_MOSI",
+ "IMU_SPI_CLK",
+ "IMU_SPI_CS_N", /* GPIO_190 */
+ "MAG_I2C_SDA",
+ "MAG_I2C_SCL",
+ "SENSOR_I2C_SDA",
+ "SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_UART_TX",
+ "HST_BLE_UART_RX", /* GPIO_200 */
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
index dab5145358e7..a428ce31ab4e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350-sony-xperia-sagami.dtsi
@@ -571,6 +571,209 @@ &spi14 {
&tlmm {
gpio-reserved-ranges = <44 4>;
+ gpio-line-names = "APPS_I2C_0_SDA", /* GPIO_0 */
+ "APPS_I2C_0_SCL",
+ "UWIDEC_PWR_EN",
+ "HAP_RST_N",
+ "NC",
+ "NC",
+ "PM8008_1_RESET_N",
+ "NC",
+ "OIS_TELE_I2C_SDA",
+ "OIS_TELE_I2C_SCL",
+ "PM8350_OPTION", /* GPIO_10 */
+ "NC",
+ "APPS_I2C_1_SDA",
+ "APPS_I2C_1_SCL",
+ "NC",
+ "NC",
+ "CAM1_RESET_N",
+ "LEO_CAM0_RESET_N",
+ "DEBUG_UART_TX",
+ "DEBUG_UART_RX",
+ "TS_I2C_SDA", /* GPIO_20 */
+ "TS_I2C_SCL",
+ "TS_RESET_N",
+ "TS_INT_N",
+ "DISP_RESET_N",
+ "SW_SERVICE",
+ "DISP_ERR_FG",
+ "TX_GTR_THRES_IN",
+ "NC",
+ "NC",
+ "NC", /* GPIO_30 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "SPK_AMP_INT_N",
+ "SPK_AMP_RESET_N",
+ "FP_INT_N",
+ "FP_RESET_N",
+ "NC", /* GPIO_40 */
+ "NC",
+ "DEBUG_GPIO0",
+ "FORCE_USB_BOOT",
+ "FP_SPI_MISO",
+ "FP_SPI_MOSI",
+ "FP_SPI_CLK",
+ "FP_SPI_CS_N",
+ "SPK_AMP_I2C_SDA",
+ "SPK_AMP_I2C_SCL",
+ "NC", /* GPIO_50 */
+ "HAP_INT_N",
+ "CAMSENSOR_I2C_SDA",
+ "CAMSENSOR_I2C_SCL",
+ "SBU_SW_OE",
+ "SBU_SW_SEL",
+ "NFC_ESE_SPI_MISO",
+ "NFC_ESE_SPI_MOSI",
+ "NFC_ESE_SPI_CLK",
+ "NFC_ESE_SPI_CS",
+ "NFC_I2C_SDA", /* GPIO_60 */
+ "NFC_I2C_SCL",
+ "NFC_EN",
+ "NFC_CLK_REQ",
+ "HST_WLAN_EN",
+ "HST_BT_EN",
+ "HW_ID_0",
+ "HW_ID_1",
+ "HST_BT_UART_CTS",
+ "HST_BT_UART_RFR",
+ "HST_BT_UART_TX", /* GPIO_70 */
+ "HST_BT_UART_RX",
+ "HAP_I2C_SDA",
+ "HAP_I2C_SCL",
+ "RF_LCD_ID_EN",
+ "RF_ID_EXTENSION",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HALL_INT_N", /* GPIO_80 */
+ "USB_CC_DIR",
+ "DISP_VSYNC",
+ "NC",
+ "NC",
+ "CAM_SOF_TELE",
+ "NFC_DWL_REQ",
+ "NFC_IRQ",
+ "WCD_RST_N",
+ "ALS_PROX_INT_N",
+ "NC", /* GPIO_90 */
+ "NC",
+ "TRAY_DET",
+ "UDON_SWITCH_SEL",
+ "PCIE0_RESET_N",
+ "PCIE0_CLK_REQ_N",
+ "PCIE0_WAKE_N",
+ "CAM_SOF",
+ "RF_ID_EXTENSION_2",
+ "RGBC_IR_INT",
+ "CAM_MCLK0", /* GPIO_100 */
+ "CAM_MCLK1",
+ "CAM_MCLK2",
+ "CAM_MCLK3",
+ "NC",
+ "NC",
+ "CAM2_RESET_N",
+ "CCI_I2C0_SDA",
+ "CCI_I2C0_SCL",
+ "CCI_I2C1_SDA",
+ "CCI_I2C1_SCL", /* GPIO_110 */
+ "CCI_I2C2_SDA",
+ "CCI_I2C2_SCL",
+ "CCI_I2C3_SDA",
+ "CCI_I2C3_SCL",
+ "NC",
+ "PM8008_1_IRQ",
+ "CAM3_RESET_N",
+ "IMU1_INT",
+ "EXT_VD0_XVS",
+ "NC", /* GPIO_120 */
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HAP_I2S_CLK",
+ "HAP_I2S_DOUT",
+ "HAP_TRG1",
+ "HAP_I2S_SYNC",
+ "HST_BT_WLAN_SLIMBUS_CLK",
+ "HST_BT_WLAN_SLIMBUS_DAT0", /* GPIO_130 */
+ "NC",
+ "UIM2_DETECT_EN",
+ "UIM2_DATA",
+ "UIM2_CLK",
+ "UIM2_RESET",
+ "UIM2_PRESENT",
+ "UIM1_DATA",
+ "UIM1_CLK",
+ "UIM1_RESET",
+ "TRAY_DET", /* GPIO_140 */
+ "SM_RFFE0_CLK",
+ "SM_RFFE0_DATA",
+ "SM_RFFE1_CLK",
+ "SM_RFFE1_DATA",
+ "SM_MSS_GRFC4",
+ "SM_MSS_GRFC5",
+ "SM_MSS_GRFC6",
+ "SM_MSS_GRFC7",
+ "SM_RFFE4_CLK",
+ "SM_RFFE4_DATA", /* GPIO_150 */
+ "WLAN_COEX_UART1_RX",
+ "WLAN_COEX_UART1_TX",
+ "HST_SW_CTRL",
+ "DISP_VDDR_EN",
+ "NC",
+ "NC",
+ "PA_INDICATOR_OR",
+ "NC",
+ "QLINK0_REQ",
+ "QLINK0_EN", /* GPIO_160 */
+ "QLINK0_WMSS_RESET_N",
+ "NC",
+ "NC",
+ "NC",
+ "PM8008_2_IRQ",
+ "TELEC_PWR_EN",
+ "PM8008_2_RESET_N",
+ "WCD_SWR_TX_CLK",
+ "WCD_SWR_TX_DATA0",
+ "WCD_SWR_TX_DATA1", /* GPIO_170 */
+ "WCD_SWR_RX_CLK",
+ "WCD_SWR_RX_DATA0",
+ "WCD_SWR_RX_DATA1",
+ "SM_DMIC1_CLK",
+ "SM_DMIC1_DATA",
+ "SM_DMIC2_CLK",
+ "SM_DMIC2_DATA",
+ "SPK_AMP_I2S_CLK",
+ "SPK_AMP_I2S_WS",
+ "SPK_AMP_I2S_ASP_DIN", /* GPIO_180 */
+ "SPK_AMP_I2S_ASP_DOUT",
+ "WCD_SWR_TX_DATA2",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "IMU_SPI_MISO",
+ "IMU_SPI_MOSI",
+ "IMU_SPI_CLK",
+ "IMU_SPI_CS_N", /* GPIO_190 */
+ "MAG_I2C_SDA",
+ "MAG_I2C_SCL",
+ "SENSOR_I2C_SDA",
+ "SENSOR_I2C_SCL",
+ "NC",
+ "NC",
+ "NC",
+ "NC",
+ "HST_BLE_UART_TX",
+ "HST_BLE_UART_RX", /* GPIO_200 */
+ "HST_WLAN_UART_TX",
+ "HST_WLAN_UART_RX";
ts_int_default: ts-int-default-state {
pins = "gpio23";
--
2.38.1
Powered by blists - more mailing lists