[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <Y3azF55qLiH3uaH7@mail.local>
Date: Thu, 17 Nov 2022 23:17:59 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Jagath Jog J <jagathjog1996@...il.com>
Cc: a.zummo@...ertech.it, robh+dt@...nel.org,
krzysztof.kozlowski+dt@...aro.org, linux-rtc@...r.kernel.org,
linux-kernel@...r.kernel.org, devicetree@...r.kernel.org
Subject: Re: [PATCH v3 2/2] rtc: max31329: Add Maxim max31329 real time clock
Hello,
I have a few small comments:
On 24/09/2022 00:23:58+0530, Jagath Jog J wrote:
> +static int max31329_get_osc_status(struct device *dev)
This function should be folded in its only call site, this will reduce
the size of the code.
> +{
> + struct max31329_data *max31329 = dev_get_drvdata(dev);
> + unsigned int status;
> + int ret;
> +
> + ret = regmap_read(max31329->regmap, MAX31329_STATUS_REG, &status);
> + if (ret)
> + return ret;
> +
> + if (status & MAX31329_STATUS_OSF)
> + return -EINVAL;
> +
> + return 0;
> +}
> +
[...]
> +static int max31329_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
> +{
> + struct max31329_data *max31329 = dev_get_drvdata(dev);
> + const struct rtc_time *tm = &alrm->time;
> + u8 regs[6], year;
> + int ret;
> +
> + regs[REG_TO_OFFSET(MAX31329_SECONDS_REG)] = bin2bcd(tm->tm_sec) & 0x7F;
> + regs[REG_TO_OFFSET(MAX31329_MINUTES_REG)] = bin2bcd(tm->tm_min) & 0x7f;
> + regs[REG_TO_OFFSET(MAX31329_HOURS_REG)] = bin2bcd(tm->tm_hour) & 0x3f;
> + regs[REG_TO_OFFSET(MAX31329_DATE_REG) - 1] = bin2bcd(tm->tm_mday) & 0x3f;
> + regs[REG_TO_OFFSET(MAX31329_MONTH_REG) - 1] = bin2bcd(tm->tm_mon + 1) & 0x1f;
> +
> + if (tm->tm_year >= 200)
> + return -EINVAL;
> +
This check is unnecessary.
> + year = bin2bcd(tm->tm_year - 100);
> + regs[REG_TO_OFFSET(MAX31329_YEAR_REG) - 1] = year;
> +
> + ret = regmap_bulk_write(max31329->regmap, MAX31329_ALM1_SEC_REG, regs,
> + MAX31329_ALM1_SEC_LEN);
> + if (ret)
> + return ret;
> +
> + return max31329_alarm_irq_enable(dev, alrm->enabled);
> +}
[...]
> +static int max31329_clkout_set_rate(struct clk_hw *hw, unsigned long rate,
> + unsigned long parent_rate)
> +{
> + struct max31329_data *max31329 = clkout_hw_to_max31329(hw);
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(clkout_rates); i++)
> + if (rate == clkout_rates[i])
> + return regmap_update_bits(max31329->regmap,
> + MAX31329_RTC_CONFIG2_REG,
> + MAX31329_RTC_CFG2_CLKOHZ_MSK,
> + FIELD_PREP(MAX31329_RTC_CFG2_CLKOHZ_MSK,
> + i));
Doesn't that i fit on the previous line?
> + return -EINVAL;
> +}
> +
> +static int max31329_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
Doesn't that fit on one line?
> +{
> + struct max31329_data *max31329;
> + int ret;
> + struct nvmem_config nvmem_cfg = {
> + .name = "max31329_nvram",
> + .word_size = 1,
> + .stride = 1,
> + .size = 64,
> + .type = NVMEM_TYPE_BATTERY_BACKED,
> + .reg_read = max31329_nvram_read,
> + .reg_write = max31329_nvram_write,
> + };
> +
> + max31329 = devm_kzalloc(&client->dev, sizeof(*max31329), GFP_KERNEL);
> + if (!max31329)
> + return -ENOMEM;
> +
> + max31329->regmap = devm_regmap_init_i2c(client, &config);
> + if (IS_ERR(max31329->regmap))
> + return PTR_ERR(max31329->regmap);
> +
> + dev_set_drvdata(&client->dev, max31329);
> +
> + max31329->rtc = devm_rtc_allocate_device(&client->dev);
> + if (IS_ERR(max31329->rtc))
> + return PTR_ERR(max31329->rtc);
> +
> + max31329->rtc->ops = &max31329_rtc_ops;
> + max31329->irq = client->irq;
> + max31329->rtc->range_min = RTC_TIMESTAMP_BEGIN_2000;
> + max31329->rtc->range_max = RTC_TIMESTAMP_END_2199;
> +
> + if (max31329->irq) {
> + ret = devm_request_threaded_irq(&client->dev, max31329->irq,
> + NULL, max31329_irq_handler,
> + IRQF_TRIGGER_LOW | IRQF_ONESHOT,
> + "max31329", &client->dev);
> + if (ret)
> + return ret;
> + } else {
> + clear_bit(RTC_FEATURE_ALARM, max31329->rtc->features);
> + clear_bit(RTC_FEATURE_UPDATE_INTERRUPT, max31329->rtc->features);
> + }
> +
> + if (max31329->irq || device_property_read_bool(&client->dev,
> + "wakeup-source"))
> + device_init_wakeup(&client->dev, true);
> +
> + ret = devm_rtc_register_device(max31329->rtc);
> + if (ret)
> + return ret;
> +
> + max31329_trickle_config(&client->dev);
> +
> + nvmem_cfg.priv = max31329->regmap;
> + devm_rtc_nvmem_register(max31329->rtc, &nvmem_cfg);
> +
> +#ifdef CONFIG_COMMON_CLK
> + max31329_clkout_register_clk(max31329, client);
> +#endif
> +
> + return 0;
> +}
> +
> +static const __maybe_unused struct of_device_id max31329_of_match[] = {
> + { .compatible = "maxim,max31329", },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, max31329_of_match);
> +
> +static struct i2c_driver max31329_driver = {
> + .driver = {
> + .name = "rtc-max31329",
> + .of_match_table = of_match_ptr(max31329_of_match),
> + },
> + .probe = max31329_probe,
> +};
> +module_i2c_driver(max31329_driver);
> +
> +MODULE_AUTHOR("Jagath Jog J <jagathjog1996@...il.com>");
> +MODULE_DESCRIPTION("Maxim MAX31329 RTC driver");
> +MODULE_LICENSE("GPL");
> --
> 2.17.1
>
--
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists