| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <9b6eb4db-83fe-e6d9-a580-1a11aace84b0@loongson.cn>
Date: Thu, 17 Nov 2022 09:07:37 +0800
From: Tiezhu Yang <yangtiezhu@...ngson.cn>
To: "Naveen N. Rao" <naveen.n.rao@...ux.ibm.com>,
Anil S Keshavamurthy <anil.s.keshavamurthy@...el.com>,
"David S. Miller" <davem@...emloft.net>,
Masami Hiramatsu <mhiramat@...nel.org>
Cc: Huacai Chen <chenhuacai@...ngson.cn>,
Jinyang He <hejinyang@...ngson.cn>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Questions about kprobe handler
Hi KPROBES maintainers,
There are some differences of kprobe handler implementations on various
archs, the implementations are almost same on arm64, riscv, csky, the
code logic is clear and understandable. But on mips and loongarch (not
upstreamed yet), if get_kprobe() returns NULL, what is the purpose of
the check "if (addr->word != breakpoint_insn.word)", is it necessary?
Can we just return directly? Please take a look, thank you.
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/mips/kernel/kprobes.c#n323
p = get_kprobe(addr);
if (p) {
...
} else if (addr->word != breakpoint_insn.word) {
/*
* The breakpoint instruction was removed by
* another cpu right after we hit, no further
* handling of this interrupt is appropriate
*/
ret = 1;
}
https://github.com/loongson/linux/blob/loongarch-next-generic-stub/arch/loongarch/kernel/kprobes.c#L262
p = get_kprobe(addr);
if (p) {
...
} else {
if (addr->word != breakpoint_insn.word) {
/*
* The breakpoint instruction was removed right
* after we hit it. Another cpu has removed
* either a probepoint or a debugger breakpoint
* at this address. In either case, no further
* handling of this interrupt is appropriate.
*/
preempt_enable_no_resched();
return 1;
}
}
(1) arm64
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/arm64/kernel/probes/kprobes.c#n309
static void __kprobes kprobe_handler(struct pt_regs *regs)
{
struct kprobe *p, *cur_kprobe;
struct kprobe_ctlblk *kcb;
unsigned long addr = instruction_pointer(regs);
kcb = get_kprobe_ctlblk();
cur_kprobe = kprobe_running();
p = get_kprobe((kprobe_opcode_t *) addr);
if (p) {
if (cur_kprobe) {
if (reenter_kprobe(p, regs, kcb))
return;
} else {
/* Probe hit */
set_current_kprobe(p);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
/*
* If we have no pre-handler or it returned 0, we
* continue with normal processing. If we have a
* pre-handler and it returned non-zero, it will
* modify the execution path and no need to single
* stepping. Let's just reset current kprobe and exit.
*/
if (!p->pre_handler || !p->pre_handler(p, regs)) {
setup_singlestep(p, regs, kcb, 0);
} else
reset_current_kprobe();
}
}
/*
* The breakpoint instruction was removed right
* after we hit it. Another cpu has removed
* either a probepoint or a debugger breakpoint
* at this address. In either case, no further
* handling of this interrupt is appropriate.
* Return back to original instruction, and continue.
*/
}
(2) riscv
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/riscv/kernel/probes/kprobes.c#n269
bool __kprobes
kprobe_breakpoint_handler(struct pt_regs *regs)
{
struct kprobe *p, *cur_kprobe;
struct kprobe_ctlblk *kcb;
unsigned long addr = instruction_pointer(regs);
kcb = get_kprobe_ctlblk();
cur_kprobe = kprobe_running();
p = get_kprobe((kprobe_opcode_t *) addr);
if (p) {
if (cur_kprobe) {
if (reenter_kprobe(p, regs, kcb))
return true;
} else {
/* Probe hit */
set_current_kprobe(p);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
/*
* If we have no pre-handler or it returned 0, we
* continue with normal processing. If we have a
* pre-handler and it returned non-zero, it will
* modify the execution path and no need to single
* stepping. Let's just reset current kprobe and exit.
*
* pre_handler can hit a breakpoint and can step thru
* before return.
*/
if (!p->pre_handler || !p->pre_handler(p, regs))
setup_singlestep(p, regs, kcb, 0);
else
reset_current_kprobe();
}
return true;
}
/*
* The breakpoint instruction was removed right
* after we hit it. Another cpu has removed
* either a probepoint or a debugger breakpoint
* at this address. In either case, no further
* handling of this interrupt is appropriate.
* Return back to original instruction, and continue.
*/
return false;
}
(3) csky
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/csky/kernel/probes/kprobes.c#n311
int __kprobes
kprobe_breakpoint_handler(struct pt_regs *regs)
{
struct kprobe *p, *cur_kprobe;
struct kprobe_ctlblk *kcb;
unsigned long addr = instruction_pointer(regs);
kcb = get_kprobe_ctlblk();
cur_kprobe = kprobe_running();
p = get_kprobe((kprobe_opcode_t *) addr);
if (p) {
if (cur_kprobe) {
if (reenter_kprobe(p, regs, kcb))
return 1;
} else {
/* Probe hit */
set_current_kprobe(p);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
/*
* If we have no pre-handler or it returned 0, we
* continue with normal processing. If we have a
* pre-handler and it returned non-zero, it will
* modify the execution path and no need to single
* stepping. Let's just reset current kprobe and exit.
*
* pre_handler can hit a breakpoint and can step thru
* before return.
*/
if (!p->pre_handler || !p->pre_handler(p, regs))
setup_singlestep(p, regs, kcb, 0);
else
reset_current_kprobe();
}
return 1;
}
/*
* The breakpoint instruction was removed right
* after we hit it. Another cpu has removed
* either a probepoint or a debugger breakpoint
* at this address. In either case, no further
* handling of this interrupt is appropriate.
* Return back to original instruction, and continue.
*/
return 0;
}
(4) mips
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/arch/mips/kernel/kprobes.c#n279
static int kprobe_handler(struct pt_regs *regs)
{
struct kprobe *p;
int ret = 0;
kprobe_opcode_t *addr;
struct kprobe_ctlblk *kcb;
addr = (kprobe_opcode_t *) regs->cp0_epc;
/*
* We don't want to be preempted for the entire
* duration of kprobe processing
*/
preempt_disable();
kcb = get_kprobe_ctlblk();
/* Check we're not actually recursing */
if (kprobe_running()) {
p = get_kprobe(addr);
if (p) {
if (kcb->kprobe_status == KPROBE_HIT_SS &&
p->ainsn.insn->word == breakpoint_insn.word) {
regs->cp0_status &= ~ST0_IE;
regs->cp0_status |= kcb->kprobe_saved_SR;
goto no_kprobe;
}
/*
* We have reentered the kprobe_handler(), since
* another probe was hit while within the handler.
* We here save the original kprobes variables and
* just single step on the instruction of the new probe
* without calling any user handlers.
*/
save_previous_kprobe(kcb);
set_current_kprobe(p, regs, kcb);
kprobes_inc_nmissed_count(p);
prepare_singlestep(p, regs, kcb);
kcb->kprobe_status = KPROBE_REENTER;
if (kcb->flags & SKIP_DELAYSLOT) {
resume_execution(p, regs, kcb);
restore_previous_kprobe(kcb);
preempt_enable_no_resched();
}
return 1;
} else if (addr->word != breakpoint_insn.word) {
/*
* The breakpoint instruction was removed by
* another cpu right after we hit, no further
* handling of this interrupt is appropriate
*/
ret = 1;
}
goto no_kprobe;
}
...
}
(5) loongarch
https://github.com/loongson/linux/blob/loongarch-next-generic-stub/arch/loongarch/kernel/kprobes.c#L228
static int __kprobes kprobe_handler(struct pt_regs *regs)
{
struct kprobe *p;
kprobe_opcode_t *addr;
struct kprobe_ctlblk *kcb;
addr = (kprobe_opcode_t *) regs->csr_era;
/*
* We don't want to be preempted for the entire
* duration of kprobe processing
*/
preempt_disable();
kcb = get_kprobe_ctlblk();
p = get_kprobe(addr);
if (p) {
if (kprobe_running()) {
if (reenter_kprobe(p, regs, kcb))
return 1;
} else {
set_current_kprobe(p, regs, kcb);
kcb->kprobe_status = KPROBE_HIT_ACTIVE;
if (p->pre_handler && p->pre_handler(p, regs)) {
/* handler has already set things up, so skip ss setup */
reset_current_kprobe();
preempt_enable_no_resched();
return 1;
} else {
setup_singlestep(p, regs, kcb, 0);
return 1;
}
}
} else {
if (addr->word != breakpoint_insn.word) {
/*
* The breakpoint instruction was removed right
* after we hit it. Another cpu has removed
* either a probepoint or a debugger breakpoint
* at this address. In either case, no further
* handling of this interrupt is appropriate.
*/
preempt_enable_no_resched();
return 1;
}
}
preempt_enable_no_resched();
return 0;
}
Thanks,
Tiezhu
Powered by blists - more mailing lists