| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <0672e801-1489-f222-2143-e0e7317d7eaf@collabora.com>
Date: Thu, 17 Nov 2022 13:42:19 +0100
From: Andrzej Pietrasiewicz <andrzej.p@...labora.com>
To: Xiaoyong Lu <xiaoyong.lu@...iatek.com>,
Yunfei Dong <yunfei.dong@...iatek.com>,
Alexandre Courbot <acourbot@...omium.org>,
Nicolas Dufresne <nicolas@...fresne.ca>,
Hans Verkuil <hverkuil-cisco@...all.nl>,
AngeloGioacchino Del Regno
<angelogioacchino.delregno@...labora.com>,
Benjamin Gaignard <benjamin.gaignard@...labora.com>,
Tiffany Lin <tiffany.lin@...iatek.com>,
Andrew-CT Chen <andrew-ct.chen@...iatek.com>,
Mauro Carvalho Chehab <mchehab@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
Tomasz Figa <tfiga@...gle.com>
Cc: George Sun <george.sun@...iatek.com>,
Hsin-Yi Wang <hsinyi@...omium.org>,
Fritz Koenig <frkoenig@...omium.org>,
Daniel Vetter <daniel@...ll.ch>,
dri-devel <dri-devel@...ts.freedesktop.org>,
Irui Wang <irui.wang@...iatek.com>,
Steve Cho <stevecho@...omium.org>, linux-media@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, srv_heupstream@...iatek.com,
linux-mediatek@...ts.infradead.org,
Project_Global_Chrome_Upstream_Group@...iatek.com
Subject: Re: [RFC PATCH v6] media: mediatek: vcodec: support stateless AV1
decoder
Hi Xiaoyong Lu,
Sorry about chiming in only at v6. Please see inline below.
Andrzej
W dniu 17.11.2022 o 07:17, Xiaoyong Lu pisze:
> Add mediatek av1 decoder linux driver which use the stateless API in
> MT8195.
>
> Signed-off-by: Xiaoyong Lu<xiaoyong.lu@...iatek.com>
> ---
> Changes from v5:
>
> - change av1 PROFILE and LEVEL cfg
> - test by av1 fluster, result is 173/239
>
> Changes from v4:
>
> - convert vb2_find_timestamp to vb2_find_buffer
> - test by av1 fluster, result is 173/239
>
> Changes from v3:
>
> - modify comment for struct vdec_av1_slice_slot
> - add define SEG_LVL_ALT_Q
> - change use_lr/use_chroma_lr parse from av1 spec
> - use ARRAY_SIZE to replace size for loop_filter_level and loop_filter_mode_deltas
> - change array size of loop_filter_mode_deltas from 4 to 2
> - add define SECONDARY_FILTER_STRENGTH_NUM_BITS
> - change some hex values from upper case to lower case
> - change *dpb_sz equal to V4L2_AV1_TOTAL_REFS_PER_FRAME + 1
> - test by av1 fluster, result is 173/239
>
> Changes from v2:
>
> - Match with av1 uapi v3 modify
> - test by av1 fluster, result is 173/239
>
> ---
> Reference series:
> [1]: v3 of this series is presend by Daniel Almeida.
> message-id: 20220825225312.564619-1-daniel.almeida@...labora.com
>
> .../media/platform/mediatek/vcodec/Makefile | 1 +
> .../vcodec/mtk_vcodec_dec_stateless.c | 47 +-
> .../platform/mediatek/vcodec/mtk_vcodec_drv.h | 1 +
> .../vcodec/vdec/vdec_av1_req_lat_if.c | 2234 +++++++++++++++++
> .../platform/mediatek/vcodec/vdec_drv_if.c | 4 +
> .../platform/mediatek/vcodec/vdec_drv_if.h | 1 +
> .../platform/mediatek/vcodec/vdec_msg_queue.c | 27 +
> .../platform/mediatek/vcodec/vdec_msg_queue.h | 4 +
> 8 files changed, 2318 insertions(+), 1 deletion(-)
> create mode 100644 drivers/media/platform/mediatek/vcodec/vdec/vdec_av1_req_lat_if.c
>
> diff --git a/drivers/media/platform/mediatek/vcodec/Makefile b/drivers/media/platform/mediatek/vcodec/Makefile
> index 93e7a343b5b0e..7537259130072 100644
> --- a/drivers/media/platform/mediatek/vcodec/Makefile
> +++ b/drivers/media/platform/mediatek/vcodec/Makefile
> @@ -10,6 +10,7 @@ mtk-vcodec-dec-y := vdec/vdec_h264_if.o \
> vdec/vdec_vp8_req_if.o \
> vdec/vdec_vp9_if.o \
> vdec/vdec_vp9_req_lat_if.o \
> + vdec/vdec_av1_req_lat_if.o \
> vdec/vdec_h264_req_if.o \
> vdec/vdec_h264_req_common.o \
> vdec/vdec_h264_req_multi_if.o \
> diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
> index c45bd2599bb2d..ceb6fabc67749 100644
> --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
> +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_dec_stateless.c
> @@ -107,11 +107,51 @@ static const struct mtk_stateless_control mtk_stateless_controls[] = {
> },
> .codec_type = V4L2_PIX_FMT_VP9_FRAME,
> },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_AV1_SEQUENCE,
> +
> + },
> + .codec_type = V4L2_PIX_FMT_AV1_FRAME,
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_AV1_FRAME,
> +
> + },
> + .codec_type = V4L2_PIX_FMT_AV1_FRAME,
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY,
> + .dims = { V4L2_AV1_MAX_TILE_COUNT },
> +
> + },
> + .codec_type = V4L2_PIX_FMT_AV1_FRAME,
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_AV1_PROFILE,
> + .min = V4L2_STATELESS_AV1_PROFILE_MAIN,
> + .def = V4L2_STATELESS_AV1_PROFILE_MAIN,
> + .max = V4L2_STATELESS_AV1_PROFILE_MAIN,
> + },
> + .codec_type = V4L2_PIX_FMT_AV1_FRAME,
> + },
> + {
> + .cfg = {
> + .id = V4L2_CID_STATELESS_AV1_LEVEL,
> + .min = V4L2_STATELESS_AV1_LEVEL_2_0,
> + .def = V4L2_STATELESS_AV1_LEVEL_4_0,
> + .max = V4L2_STATELESS_AV1_LEVEL_5_1,
> + },
> + .codec_type = V4L2_PIX_FMT_AV1_FRAME,
> + },
> };
>
> #define NUM_CTRLS ARRAY_SIZE(mtk_stateless_controls)
>
> -static struct mtk_video_fmt mtk_video_formats[5];
> +static struct mtk_video_fmt mtk_video_formats[6];
>
> static struct mtk_video_fmt default_out_format;
> static struct mtk_video_fmt default_cap_format;
> @@ -351,6 +391,7 @@ static void mtk_vcodec_add_formats(unsigned int fourcc,
> case V4L2_PIX_FMT_H264_SLICE:
> case V4L2_PIX_FMT_VP8_FRAME:
> case V4L2_PIX_FMT_VP9_FRAME:
> + case V4L2_PIX_FMT_AV1_FRAME:
> mtk_video_formats[count_formats].fourcc = fourcc;
> mtk_video_formats[count_formats].type = MTK_FMT_DEC;
> mtk_video_formats[count_formats].num_planes = 1;
> @@ -407,6 +448,10 @@ static void mtk_vcodec_get_supported_formats(struct mtk_vcodec_ctx *ctx)
> mtk_vcodec_add_formats(V4L2_PIX_FMT_VP9_FRAME, ctx);
> out_format_count++;
> }
> + if (ctx->dev->dec_capability & MTK_VDEC_FORMAT_AV1_FRAME) {
> + mtk_vcodec_add_formats(V4L2_PIX_FMT_AV1_FRAME, ctx);
> + out_format_count++;
> + }
>
> if (cap_format_count)
> default_cap_format = mtk_video_formats[cap_format_count - 1];
> diff --git a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_drv.h b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_drv.h
> index 6a47a11ff654a..a6db972b1ff72 100644
> --- a/drivers/media/platform/mediatek/vcodec/mtk_vcodec_drv.h
> +++ b/drivers/media/platform/mediatek/vcodec/mtk_vcodec_drv.h
> @@ -344,6 +344,7 @@ enum mtk_vdec_format_types {
> MTK_VDEC_FORMAT_H264_SLICE = 0x100,
> MTK_VDEC_FORMAT_VP8_FRAME = 0x200,
> MTK_VDEC_FORMAT_VP9_FRAME = 0x400,
> + MTK_VDEC_FORMAT_AV1_FRAME = 0x800,
> MTK_VCODEC_INNER_RACING = 0x20000,
> };
>
> diff --git a/drivers/media/platform/mediatek/vcodec/vdec/vdec_av1_req_lat_if.c b/drivers/media/platform/mediatek/vcodec/vdec/vdec_av1_req_lat_if.c
> new file mode 100644
> index 0000000000000..2ac77175dad7c
> --- /dev/null
> +++ b/drivers/media/platform/mediatek/vcodec/vdec/vdec_av1_req_lat_if.c
> @@ -0,0 +1,2234 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2022 MediaTek Inc.
> + * Author: Xiaoyong Lu <xiaoyong.lu@...iatek.com>
> + */
> +
> +#include <linux/module.h>
> +#include <linux/slab.h>
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include "../mtk_vcodec_util.h"
> +#include "../mtk_vcodec_dec.h"
> +#include "../mtk_vcodec_intr.h"
> +#include "../vdec_drv_base.h"
> +#include "../vdec_drv_if.h"
> +#include "../vdec_vpu_if.h"
> +
> +#define AV1_MAX_FRAME_BUF_COUNT (V4L2_AV1_TOTAL_REFS_PER_FRAME + 1)
> +#define AV1_TILE_BUF_SIZE 64
> +#define AV1_SCALE_SUBPEL_BITS 10
> +#define AV1_REF_SCALE_SHIFT 14
> +#define AV1_REF_NO_SCALE BIT(AV1_REF_SCALE_SHIFT)
> +#define AV1_REF_INVALID_SCALE -1
> +
> +#define AV1_INVALID_IDX -1
> +
> +#define AV1_DIV_ROUND_UP_POW2(value, n) \
> +({ \
> + typeof(n) _n = n; \
> + typeof(value) _value = value; \
> + (_value + (BIT(_n) >> 1)) >> _n; \
> +})
> +
> +#define AV1_DIV_ROUND_UP_POW2_SIGNED(value, n) \
> +({ \
> + typeof(n) _n_ = n; \
> + typeof(value) _value_ = value; \
> + (((_value_) < 0) ? -AV1_DIV_ROUND_UP_POW2(-(_value_), (_n_)) \
> + : AV1_DIV_ROUND_UP_POW2((_value_), (_n_))); \
> +})
> +
> +#define BIT_FLAG(x, bit) (!!((x)->flags & (bit)))
> +#define SEGMENTATION_FLAG(x, name) (!!((x)->flags & V4L2_AV1_SEGMENTATION_FLAG_##name))
> +#define QUANT_FLAG(x, name) (!!((x)->flags & V4L2_AV1_QUANTIZATION_FLAG_##name))
> +#define SEQUENCE_FLAG(x, name) (!!((x)->flags & V4L2_AV1_SEQUENCE_FLAG_##name))
> +#define FH_FLAG(x, name) (!!((x)->flags & V4L2_AV1_FRAME_FLAG_##name))
> +
> +#define MINQ 0
> +#define MAXQ 255
> +
> +#define DIV_LUT_PREC_BITS 14
> +#define DIV_LUT_BITS 8
> +#define DIV_LUT_NUM BIT(DIV_LUT_BITS)
> +#define WARP_PARAM_REDUCE_BITS 6
> +#define WARPEDMODEL_PREC_BITS 16
> +
> +#define SEG_LVL_ALT_Q 0
> +#define SECONDARY_FILTER_STRENGTH_NUM_BITS 2
> +
> +static const short div_lut[DIV_LUT_NUM + 1] = {
> + 16384, 16320, 16257, 16194, 16132, 16070, 16009, 15948, 15888, 15828, 15768,
> + 15709, 15650, 15592, 15534, 15477, 15420, 15364, 15308, 15252, 15197, 15142,
> + 15087, 15033, 14980, 14926, 14873, 14821, 14769, 14717, 14665, 14614, 14564,
> + 14513, 14463, 14413, 14364, 14315, 14266, 14218, 14170, 14122, 14075, 14028,
> + 13981, 13935, 13888, 13843, 13797, 13752, 13707, 13662, 13618, 13574, 13530,
> + 13487, 13443, 13400, 13358, 13315, 13273, 13231, 13190, 13148, 13107, 13066,
> + 13026, 12985, 12945, 12906, 12866, 12827, 12788, 12749, 12710, 12672, 12633,
> + 12596, 12558, 12520, 12483, 12446, 12409, 12373, 12336, 12300, 12264, 12228,
> + 12193, 12157, 12122, 12087, 12053, 12018, 11984, 11950, 11916, 11882, 11848,
> + 11815, 11782, 11749, 11716, 11683, 11651, 11619, 11586, 11555, 11523, 11491,
> + 11460, 11429, 11398, 11367, 11336, 11305, 11275, 11245, 11215, 11185, 11155,
> + 11125, 11096, 11067, 11038, 11009, 10980, 10951, 10923, 10894, 10866, 10838,
> + 10810, 10782, 10755, 10727, 10700, 10673, 10645, 10618, 10592, 10565, 10538,
> + 10512, 10486, 10460, 10434, 10408, 10382, 10356, 10331, 10305, 10280, 10255,
> + 10230, 10205, 10180, 10156, 10131, 10107, 10082, 10058, 10034, 10010, 9986,
> + 9963, 9939, 9916, 9892, 9869, 9846, 9823, 9800, 9777, 9754, 9732,
> + 9709, 9687, 9664, 9642, 9620, 9598, 9576, 9554, 9533, 9511, 9489,
> + 9468, 9447, 9425, 9404, 9383, 9362, 9341, 9321, 9300, 9279, 9259,
> + 9239, 9218, 9198, 9178, 9158, 9138, 9118, 9098, 9079, 9059, 9039,
> + 9020, 9001, 8981, 8962, 8943, 8924, 8905, 8886, 8867, 8849, 8830,
> + 8812, 8793, 8775, 8756, 8738, 8720, 8702, 8684, 8666, 8648, 8630,
> + 8613, 8595, 8577, 8560, 8542, 8525, 8508, 8490, 8473, 8456, 8439,
> + 8422, 8405, 8389, 8372, 8355, 8339, 8322, 8306, 8289, 8273, 8257,
> + 8240, 8224, 8208, 8192,
> +};
> +
> +/**
> + * struct vdec_av1_slice_init_vsi - VSI used to initialize instance
> + * @architecture: architecture type
> + * @reserved: reserved
> + * @core_vsi: for core vsi
> + * @cdf_table_addr: cdf table addr
> + * @cdf_table_size: cdf table size
> + * @iq_table_addr: iq table addr
> + * @iq_table_size: iq table size
> + * @vsi_size: share vsi structure size
> + */
> +struct vdec_av1_slice_init_vsi {
> + u32 architecture;
> + u32 reserved;
> + u64 core_vsi;
> + u64 cdf_table_addr;
> + u32 cdf_table_size;
> + u64 iq_table_addr;
> + u32 iq_table_size;
> + u32 vsi_size;
> +};
> +
> +/**
> + * struct vdec_av1_slice_mem - memory address and size
> + * @buf: dma_addr padding
> + * @dma_addr: buffer address
> + * @size: buffer size
> + * @dma_addr_end: buffer end address
> + * @padding: for padding
> + */
> +struct vdec_av1_slice_mem {
> + union {
> + u64 buf;
> + dma_addr_t dma_addr;
> + };
> + union {
> + size_t size;
> + dma_addr_t dma_addr_end;
> + u64 padding;
> + };
> +};
> +
> +/**
> + * struct vdec_av1_slice_state - decoding state
> + * @err : err type for decode
> + * @full : transcoded buffer is full or not
> + * @timeout : decode timeout or not
> + * @perf : performance enable
> + * @crc : hw checksum
> + * @out_size : hw output size
> + */
> +struct vdec_av1_slice_state {
> + int err;
> + u32 full;
> + u32 timeout;
> + u32 perf;
> + u32 crc[16];
> + u32 out_size;
> +};
> +
> +/*
> + * enum vdec_av1_slice_resolution_level - resolution level
> + */
> +enum vdec_av1_slice_resolution_level {
> + AV1_RES_NONE,
> + AV1_RES_FHD,
> + AV1_RES_4K,
> + AV1_RES_8K,
> +};
> +
> +/*
> + * enum vdec_av1_slice_frame_type - av1 frame type
> + */
> +enum vdec_av1_slice_frame_type {
> + AV1_KEY_FRAME = 0,
> + AV1_INTER_FRAME,
> + AV1_INTRA_ONLY_FRAME,
> + AV1_SWITCH_FRAME,
> + AV1_FRAME_TYPES,
> +};
> +
> +/*
> + * enum vdec_av1_slice_reference_mode - reference mode type
> + */
> +enum vdec_av1_slice_reference_mode {
> + AV1_SINGLE_REFERENCE = 0,
> + AV1_COMPOUND_REFERENCE,
> + AV1_REFERENCE_MODE_SELECT,
> + AV1_REFERENCE_MODES,
> +};
> +
> +/**
> + * struct vdec_av1_slice_tile_group - info for each tile
> + * @num_tiles: tile number
> + * @tile_size: input size for each tile
> + * @tile_start_offset: tile offset to input buffer
> + */
> +struct vdec_av1_slice_tile_group {
> + u32 num_tiles;
> + u32 tile_size[V4L2_AV1_MAX_TILE_COUNT];
> + u32 tile_start_offset[V4L2_AV1_MAX_TILE_COUNT];
> +};
> +
> +/**
> + * struct vdec_av1_slice_scale_factors - scale info for each ref frame
> + * @is_scaled: frame is scaled or not
> + * @x_scale: frame width scale coefficient
> + * @y_scale: frame height scale coefficient
> + * @x_step: width step for x_scale
> + * @y_step: height step for y_scale
> + */
> +struct vdec_av1_slice_scale_factors {
> + u8 is_scaled;
> + int x_scale;
> + int y_scale;
> + int x_step;
> + int y_step;
> +};
> +
> +/**
> + * struct vdec_av1_slice_frame_refs - ref frame info
> + * @ref_fb_idx: ref slot index
> + * @ref_map_idx: ref frame index
> + * @scale_factors: scale factors for each ref frame
> + */
> +struct vdec_av1_slice_frame_refs {
> + int ref_fb_idx;
> + int ref_map_idx;
> + struct vdec_av1_slice_scale_factors scale_factors;
> +};
> +
> +/**
> + * struct vdec_av1_slice_gm - AV1 Global Motion parameters
> + * @wmtype: The type of global motion transform used
> + * @wmmat: gm_params
> + * @alpha: alpha info
> + * @beta: beta info
> + * @gamma: gamma info
> + * @delta: delta info
> + * @invalid: is invalid or not
> + */
> +struct vdec_av1_slice_gm {
> + int wmtype;
> + int wmmat[8];
> + short alpha;
> + short beta;
> + short gamma;
> + short delta;
> + char invalid;
> +};
> +
> +/**
> + * struct vdec_av1_slice_sm - AV1 Skip Mode parameters
> + * @skip_mode_allowed: Skip Mode is allowed or not
> + * @skip_mode_present: specified that the skip_mode will be present or not
> + * @skip_mode_frame: specifies the frames to use for compound prediction
> + */
> +struct vdec_av1_slice_sm {
> + u8 skip_mode_allowed;
> + u8 skip_mode_present;
> + int skip_mode_frame[2];
> +};
> +
> +/**
> + * struct vdec_av1_slice_seg - AV1 Segmentation params
> + * @segmentation_enabled: this frame makes use of the segmentation tool or not
> + * @segmentation_update_map: segmentation map are updated during the decoding frame
> + * @segmentation_temporal_update:segmentation map are coded relative the existing segmentaion map
> + * @segmentation_update_data: new parameters are about to be specified for each segment
> + * @feature_data: specifies the feature data for a segment feature
> + * @feature_enabled_mask: the corresponding feature value is coded or not.
> + * @segid_preskip: segment id will be read before the skip syntax element.
> + * @last_active_segid: the highest numbered segment id that has some enabled feature
> + */
> +struct vdec_av1_slice_seg {
> + u8 segmentation_enabled;
> + u8 segmentation_update_map;
> + u8 segmentation_temporal_update;
> + u8 segmentation_update_data;
> + int feature_data[V4L2_AV1_MAX_SEGMENTS][V4L2_AV1_SEG_LVL_MAX];
> + u16 feature_enabled_mask[V4L2_AV1_MAX_SEGMENTS];
> + int segid_preskip;
> + int last_active_segid;
> +};
> +
> +/**
> + * struct vdec_av1_slice_delta_q_lf - AV1 Loop Filter delta parameters
> + * @delta_q_present: specified whether quantizer index delta values are present
> + * @delta_q_res: specifies the left shift which should be applied to decoded quantizer index
> + * @delta_lf_present: specifies whether loop filter delta values are present
> + * @delta_lf_res: specifies the left shift which should be applied to decoded
> + * loop filter delta values
> + * @delta_lf_multi: specifies that separate loop filter deltas are sent for horizontal
> + * luma edges,vertical luma edges,the u edges, and the v edges.
> + */
> +struct vdec_av1_slice_delta_q_lf {
> + u8 delta_q_present;
> + u8 delta_q_res;
> + u8 delta_lf_present;
> + u8 delta_lf_res;
> + u8 delta_lf_multi;
> +};
> +
> +/**
> + * struct vdec_av1_slice_quantization - AV1 Quantization params
> + * @base_q_idx: indicates the base frame qindex. This is used for Y AC
> + * coefficients and as the base value for the other quantizers.
> + * @qindex: qindex
> + * @delta_qydc: indicates the Y DC quantizer relative to base_q_idx
> + * @delta_qudc: indicates the U DC quantizer relative to base_q_idx.
> + * @delta_quac: indicates the U AC quantizer relative to base_q_idx
> + * @delta_qvdc: indicates the V DC quantizer relative to base_q_idx
> + * @delta_qvac: indicates the V AC quantizer relative to base_q_idx
> + * @using_qmatrix: specifies that the quantizer matrix will be used to
> + * compute quantizers
> + * @qm_y: specifies the level in the quantizer matrix that should
> + * be used for luma plane decoding
> + * @qm_u: specifies the level in the quantizer matrix that should
> + * be used for chroma U plane decoding.
> + * @qm_v: specifies the level in the quantizer matrix that should be
> + * used for chroma V plane decoding
> + */
> +struct vdec_av1_slice_quantization {
> + int base_q_idx;
> + int qindex[V4L2_AV1_MAX_SEGMENTS];
> + int delta_qydc;
> + int delta_qudc;
> + int delta_quac;
> + int delta_qvdc;
> + int delta_qvac;
> + u8 using_qmatrix;
> + u8 qm_y;
> + u8 qm_u;
> + u8 qm_v;
> +};
> +
> +/**
> + * struct vdec_av1_slice_lr - AV1 Loop Restauration parameters
> + * @use_lr: whether to use loop restoration
> + * @use_chroma_lr: whether to use chroma loop restoration
> + * @frame_restoration_type: specifies the type of restoration used for each plane
> + * @loop_restoration_size: pecifies the size of loop restoration units in units
> + * of samples in the current plane
> + */
> +struct vdec_av1_slice_lr {
> + u8 use_lr;
> + u8 use_chroma_lr;
> + u8 frame_restoration_type[V4L2_AV1_NUM_PLANES_MAX];
> + u32 loop_restoration_size[V4L2_AV1_NUM_PLANES_MAX];
> +};
> +
> +/**
> + * struct vdec_av1_slice_loop_filter - AV1 Loop filter parameters
> + * @loop_filter_level: an array containing loop filter strength values.
> + * @loop_filter_ref_deltas: contains the adjustment needed for the filter
> + * level based on the chosen reference frame
> + * @loop_filter_mode_deltas: contains the adjustment needed for the filter
> + * level based on the chosen mode
> + * @loop_filter_sharpness: indicates the sharpness level. The loop_filter_level
> + * and loop_filter_sharpness together determine when
> + * a block edge is filtered, and by how much the
> + * filtering can change the sample values
> + * @loop_filter_delta_enabled: filetr level depends on the mode and reference
> + * frame used to predict a block
> + */
> +struct vdec_av1_slice_loop_filter {
> + u8 loop_filter_level[4];
> + int loop_filter_ref_deltas[V4L2_AV1_TOTAL_REFS_PER_FRAME];
> + int loop_filter_mode_deltas[2];
> + u8 loop_filter_sharpness;
> + u8 loop_filter_delta_enabled;
> +};
> +
> +/**
> + * struct vdec_av1_slice_cdef - AV1 CDEF parameters
> + * @cdef_damping: controls the amount of damping in the deringing filter
> + * @cdef_y_strength: specifies the strength of the primary filter and secondary filter
> + * @cdef_uv_strength: specifies the strength of the primary filter and secondary filter
> + * @cdef_bits: specifies the number of bits needed to specify which
> + * CDEF filter to apply
> + */
> +struct vdec_av1_slice_cdef {
> + u8 cdef_damping;
> + u8 cdef_y_strength[8];
> + u8 cdef_uv_strength[8];
> + u8 cdef_bits;
> +};
> +
> +/**
> + * struct vdec_av1_slice_mfmv - AV1 mfmv parameters
> + * @mfmv_valid_ref: mfmv_valid_ref
> + * @mfmv_dir: mfmv_dir
> + * @mfmv_ref_to_cur: mfmv_ref_to_cur
> + * @mfmv_ref_frame_idx: mfmv_ref_frame_idx
> + * @mfmv_count: mfmv_count
> + */
> +struct vdec_av1_slice_mfmv {
> + u32 mfmv_valid_ref[3];
> + u32 mfmv_dir[3];
> + int mfmv_ref_to_cur[3];
> + int mfmv_ref_frame_idx[3];
> + int mfmv_count;
> +};
> +
> +/**
> + * struct vdec_av1_slice_tile - AV1 Tile info
> + * @tile_cols: specifies the number of tiles across the frame
> + * @tile_rows: pecifies the number of tiles down the frame
> + * @mi_col_starts: an array specifying the start column
> + * @mi_row_starts: an array specifying the start row
> + * @context_update_tile_id: specifies which tile to use for the CDF update
> + * @uniform_tile_spacing_flag: tiles are uniformly spaced across the frame
> + * or the tile sizes are coded
> + */
> +struct vdec_av1_slice_tile {
> + u8 tile_cols;
> + u8 tile_rows;
> + int mi_col_starts[V4L2_AV1_MAX_TILE_COLS + 1];
> + int mi_row_starts[V4L2_AV1_MAX_TILE_ROWS + 1];
> + u8 context_update_tile_id;
> + u8 uniform_tile_spacing_flag;
> +};
> +
> +/**
> + * struct vdec_av1_slice_uncompressed_header - Represents an AV1 Frame Header OBU
> + * @use_ref_frame_mvs: use_ref_frame_mvs flag
> + * @order_hint: specifies OrderHintBits least significant bits of the expected
> + * @gm: global motion param
> + * @upscaled_width: the upscaled width
> + * @frame_width: frame's width
> + * @frame_height: frame's height
> + * @reduced_tx_set: frame is restricted to a reduced subset of the full
> + * set of transform types
> + * @tx_mode: specifies how the transform size is determined
> + * @uniform_tile_spacing_flag: tiles are uniformly spaced across the frame
> + * or the tile sizes are coded
> + * @interpolation_filter: specifies the filter selection used for performing inter prediction
> + * @allow_warped_motion: motion_mode may be present or not
> + * @is_motion_mode_switchable : euqlt to 0 specifies that only the SIMPLE motion mode will be used
> + * @reference_mode : frame reference mode selected
> + * @allow_high_precision_mv: specifies that motion vectors are specified to
> + * quarter pel precision or to eighth pel precision
> + * @allow_intra_bc: ubducates that intra block copy may be used in this frame
> + * @force_integer_mv: specifies motion vectors will always be integers or
> + * can contain fractional bits
> + * @allow_screen_content_tools: intra blocks may use palette encoding
> + * @error_resilient_mode: error resislent mode is enable/disable
> + * @frame_type: specifies the AV1 frame type
> + * @primary_ref_frame: specifies which reference frame contains the CDF values
> + * and other state that should be loaded at the start of the frame
> + * slots will be updated with the current frame after it is decoded
> + * @disable_frame_end_update_cdf:indicates the end of frame CDF update is disable or enable
> + * @disable_cdf_update: specified whether the CDF update in the symbol
> + * decoding process should be disables
> + * @skip_mode: av1 skip mode parameters
> + * @seg: av1 segmentaon parameters
> + * @delta_q_lf: av1 delta loop fileter
> + * @quant: av1 Quantization params
> + * @lr: av1 Loop Restauration parameters
> + * @superres_denom: the denominator for the upscaling ratio
> + * @loop_filter: av1 Loop filter parameters
> + * @cdef: av1 CDEF parameters
> + * @mfmv: av1 mfmv parameters
> + * @tile: av1 Tile info
> + * @frame_is_intra: intra frame
> + * @loss_less_array: loss less array
> + * @coded_loss_less: coded lsss less
> + * @mi_rows: size of mi unit in rows
> + * @mi_cols: size of mi unit in cols
> + */
> +struct vdec_av1_slice_uncompressed_header {
> + u8 use_ref_frame_mvs;
> + int order_hint;
> + struct vdec_av1_slice_gm gm[V4L2_AV1_TOTAL_REFS_PER_FRAME];
> + u32 upscaled_width;
> + u32 frame_width;
> + u32 frame_height;
> + u8 reduced_tx_set;
> + u8 tx_mode;
> + u8 uniform_tile_spacing_flag;
> + u8 interpolation_filter;
> + u8 allow_warped_motion;
> + u8 is_motion_mode_switchable;
> + u8 reference_mode;
> + u8 allow_high_precision_mv;
> + u8 allow_intra_bc;
> + u8 force_integer_mv;
> + u8 allow_screen_content_tools;
> + u8 error_resilient_mode;
> + u8 frame_type;
> + u8 primary_ref_frame;
> + u8 disable_frame_end_update_cdf;
> + u32 disable_cdf_update;
> + struct vdec_av1_slice_sm skip_mode;
> + struct vdec_av1_slice_seg seg;
> + struct vdec_av1_slice_delta_q_lf delta_q_lf;
> + struct vdec_av1_slice_quantization quant;
> + struct vdec_av1_slice_lr lr;
> + u32 superres_denom;
> + struct vdec_av1_slice_loop_filter loop_filter;
> + struct vdec_av1_slice_cdef cdef;
> + struct vdec_av1_slice_mfmv mfmv;
> + struct vdec_av1_slice_tile tile;
> + u8 frame_is_intra;
> + u8 loss_less_array[V4L2_AV1_MAX_SEGMENTS];
> + u8 coded_loss_less;
> + u32 mi_rows;
> + u32 mi_cols;
> +};
> +
> +/**
> + * struct vdec_av1_slice_seq_header - Represents an AV1 Sequence OBU
> + * @bitdepth: the bitdepth to use for the sequence
> + * @enable_superres: specifies whether the use_superres syntax element may be present
> + * @enable_filter_intra: specifies the use_filter_intra syntax element may be present
> + * @enable_intra_edge_filter: whether the intra edge filtering process should be enabled
> + * @enable_interintra_compound: specifies the mode info fo rinter blocks may
> + * contain the syntax element interintra
> + * @enable_masked_compound: specifies the mode info fo rinter blocks may
> + * contain the syntax element compound_type
> + * @enable_dual_filter: the inter prediction filter type may be specified independently
> + * @enable_jnt_comp: distance weights process may be used for inter prediction
> + * @mono_chrome: indicates the video does not contain U and V color planes
> + * @enable_order_hint: tools based on the values of order hints may be used
> + * @order_hint_bits: the number of bits used for the order_hint field at each frame
> + * @use_128x128_superblock: indicates superblocks contain 128*128 luma samples
> + * @subsampling_x: the chroma subsamling format
> + * @subsampling_y: the chroma subsamling format
> + * @max_frame_width: the maximum frame width for the frames represented by sequence
> + * @max_frame_height: the maximum frame height for the frames represented by sequence
> + */
> +struct vdec_av1_slice_seq_header {
> + u8 bitdepth;
> + u8 enable_superres;
> + u8 enable_filter_intra;
> + u8 enable_intra_edge_filter;
> + u8 enable_interintra_compound;
> + u8 enable_masked_compound;
> + u8 enable_dual_filter;
> + u8 enable_jnt_comp;
> + u8 mono_chrome;
> + u8 enable_order_hint;
> + u8 order_hint_bits;
> + u8 use_128x128_superblock;
> + u8 subsampling_x;
> + u8 subsampling_y;
> + u32 max_frame_width;
> + u32 max_frame_height;
> +};
> +
> +/**
> + * struct vdec_av1_slice_frame - Represents current Frame info
> + * @uh: uncompressed header info
> + * @seq: sequence header info
> + * @large_scale_tile: is large scale mode
> + * @cur_ts: current frame timestamp
> + * @prev_fb_idx: prev slot id
> + * @ref_frame_sign_bias: arrays for ref_frame sign bias
> + * @order_hints: arrays for ref_frame order hint
> + * @ref_frame_valid: arrays for valid ref_frame
> + * @ref_frame_map: map to slot frame info
> + * @frame_refs: ref_frame info
> + */
> +struct vdec_av1_slice_frame {
> + struct vdec_av1_slice_uncompressed_header uh;
> + struct vdec_av1_slice_seq_header seq;
> + u8 large_scale_tile;
> + u64 cur_ts;
> + int prev_fb_idx;
> + u8 ref_frame_sign_bias[V4L2_AV1_TOTAL_REFS_PER_FRAME];
> + u32 order_hints[V4L2_AV1_REFS_PER_FRAME];
> + u32 ref_frame_valid[V4L2_AV1_REFS_PER_FRAME];
> + int ref_frame_map[V4L2_AV1_TOTAL_REFS_PER_FRAME];
> + struct vdec_av1_slice_frame_refs frame_refs[V4L2_AV1_REFS_PER_FRAME];
> +};
> +
> +/**
> + * struct vdec_av1_slice_work_buffer - work buffer for lat
> + * @mv_addr: mv buffer memory info
> + * @cdf_addr: cdf buffer memory info
> + * @segid_addr: segid buffer memory info
> + */
> +struct vdec_av1_slice_work_buffer {
> + struct vdec_av1_slice_mem mv_addr;
> + struct vdec_av1_slice_mem cdf_addr;
> + struct vdec_av1_slice_mem segid_addr;
> +};
> +
> +/**
> + * struct vdec_av1_slice_frame_info - frame info for each slot
> + * @frame_type: frame type
> + * @frame_is_intra: is intra frame
> + * @order_hint: order hint
> + * @order_hints: referece frame order hint
> + * @upscaled_width: upscale width
> + * @pic_pitch: buffer pitch
> + * @frame_width: frane width
> + * @frame_height: frame height
> + * @mi_rows: rows in mode info
> + * @mi_cols: cols in mode info
> + * @ref_count: mark to reference frame counts
> + */
> +struct vdec_av1_slice_frame_info {
> + u8 frame_type;
> + u8 frame_is_intra;
> + int order_hint;
> + u32 order_hints[V4L2_AV1_REFS_PER_FRAME];
> + u32 upscaled_width;
> + u32 pic_pitch;
> + u32 frame_width;
> + u32 frame_height;
> + u32 mi_rows;
> + u32 mi_cols;
> + int ref_count;
> +};
> +
> +/**
> + * struct vdec_av1_slice_slot - slot info that needs to be saved in the global instance
> + * @frame_info: frame info for each slot
> + * @timestamp: time stamp info
> + */
> +struct vdec_av1_slice_slot {
> + struct vdec_av1_slice_frame_info frame_info[AV1_MAX_FRAME_BUF_COUNT];
> + u64 timestamp[AV1_MAX_FRAME_BUF_COUNT];
> +};
> +
> +/**
> + * struct vdec_av1_slice_fb - frame buffer for decoding
> + * @y: current y buffer address info
> + * @c: current c buffer address info
> + */
> +struct vdec_av1_slice_fb {
> + struct vdec_av1_slice_mem y;
> + struct vdec_av1_slice_mem c;
> +};
> +
> +/**
> + * struct vdec_av1_slice_vsi - exchange frame information between Main CPU and MicroP
> + * @bs: input buffer info
> + * @work_buffer: working buffe for hw
> + * @cdf_table: cdf_table buffer
> + * @cdf_tmp: cdf temp buffer
> + * @rd_mv: mv buffer for lat output , core input
> + * @ube: ube buffer
> + * @trans: transcoded buffer
> + * @err_map: err map buffer
> + * @row_info: row info buffer
> + * @fb: current y/c buffer
> + * @ref: ref y/c buffer
> + * @iq_table: iq table buffer
> + * @tile: tile buffer
> + * @slots: slots info for each frame
> + * @slot_id: current frame slot id
> + * @frame: current frame info
> + * @state: status after decode done
> + * @cur_lst_tile_id: tile id for large scale
> + */
> +struct vdec_av1_slice_vsi {
> + /* lat */
> + struct vdec_av1_slice_mem bs;
> + struct vdec_av1_slice_work_buffer work_buffer[AV1_MAX_FRAME_BUF_COUNT];
> + struct vdec_av1_slice_mem cdf_table;
> + struct vdec_av1_slice_mem cdf_tmp;
> + /* LAT stage's output, Core stage's input */
> + struct vdec_av1_slice_mem rd_mv;
> + struct vdec_av1_slice_mem ube;
> + struct vdec_av1_slice_mem trans;
> + struct vdec_av1_slice_mem err_map;
> + struct vdec_av1_slice_mem row_info;
> + /* core */
> + struct vdec_av1_slice_fb fb;
> + struct vdec_av1_slice_fb ref[V4L2_AV1_REFS_PER_FRAME];
> + struct vdec_av1_slice_mem iq_table;
> + /* lat and core share*/
> + struct vdec_av1_slice_mem tile;
> + struct vdec_av1_slice_slot slots;
> + u8 slot_id;
> + struct vdec_av1_slice_frame frame;
> + struct vdec_av1_slice_state state;
> + u32 cur_lst_tile_id;
> +};
> +
> +/**
> + * struct vdec_av1_slice_pfc - per-frame context that contains a local vsi.
> + * pass it from lat to core
> + * @vsi: local vsi. copy to/from remote vsi before/after decoding
> + * @ref_idx: reference buffer timestamp
> + * @seq: picture sequence
> + */
> +struct vdec_av1_slice_pfc {
> + struct vdec_av1_slice_vsi vsi;
> + u64 ref_idx[V4L2_AV1_REFS_PER_FRAME];
> + int seq;
> +};
> +
> +/**
> + * struct vdec_av1_slice_instance - represent one av1 instance
> + * @ctx: pointer to codec's context
> + * @vpu: VPU instance
> + * @iq_table: iq table buffer
> + * @cdf_table: cdf table buffer
> + * @mv: mv working buffer
> + * @cdf: cdf working buffer
> + * @seg: segmentation working buffer
> + * @cdf_temp: cdf temp buffer
> + * @tile: tile buffer
> + * @slots: slots info
> + * @tile_group: tile_group entry
> + * @level: level of current resolution
> + * @width: width of last picture
> + * @height: height of last picture
> + * @frame_type: frame_type of last picture
> + * @irq: irq to Main CPU or MicroP
> + * @inneracing_mode: is inneracing mode
> + * @init_vsi: vsi used for initialized AV1 instance
> + * @vsi: vsi used for decoding/flush ...
> + * @core_vsi: vsi used for Core stage
> + * @seq: global picture sequence
> + */
> +struct vdec_av1_slice_instance {
> + struct mtk_vcodec_ctx *ctx;
> + struct vdec_vpu_inst vpu;
> +
> + struct mtk_vcodec_mem iq_table;
> + struct mtk_vcodec_mem cdf_table;
> +
> + struct mtk_vcodec_mem mv[AV1_MAX_FRAME_BUF_COUNT];
> + struct mtk_vcodec_mem cdf[AV1_MAX_FRAME_BUF_COUNT];
> + struct mtk_vcodec_mem seg[AV1_MAX_FRAME_BUF_COUNT];
> + struct mtk_vcodec_mem cdf_temp;
> + struct mtk_vcodec_mem tile;
> + struct vdec_av1_slice_slot slots;
> + struct vdec_av1_slice_tile_group tile_group;
> +
> + /* for resolution change and get_pic_info */
> + enum vdec_av1_slice_resolution_level level;
> + u32 width;
> + u32 height;
> +
> + u32 frame_type;
> + u32 irq;
> + u32 inneracing_mode;
> +
> + /* MicroP vsi */
> + union {
> + struct vdec_av1_slice_init_vsi *init_vsi;
> + struct vdec_av1_slice_vsi *vsi;
> + };
> + struct vdec_av1_slice_vsi *core_vsi;
> + int seq;
> +};
> +
> +static int vdec_av1_slice_core_decode(struct vdec_lat_buf *lat_buf);
> +
> +static inline int vdec_av1_slice_get_msb(u32 n)
> +{
> + if (n == 0)
> + return 0;
> + return 31 ^ __builtin_clz(n);
> +}
> +
> +static inline bool vdec_av1_slice_need_scale(u32 ref_width, u32 ref_height,
> + u32 this_width, u32 this_height)
> +{
> + return ((this_width << 1) >= ref_width) &&
> + ((this_height << 1) >= ref_height) &&
> + (this_width <= (ref_width << 4)) &&
> + (this_height <= (ref_height << 4));
> +}
> +
> +static void *vdec_av1_get_ctrl_ptr(struct mtk_vcodec_ctx *ctx, int id)
> +{
> + struct v4l2_ctrl *ctrl = v4l2_ctrl_find(&ctx->ctrl_hdl, id);
> +
> + if (!ctrl)
> + return ERR_PTR(-EINVAL);
> +
> + return ctrl->p_cur.p;
> +}
I see we keep repeating this kind of a v4l2_ctrl_find() wrapper in drivers.
The only reason this code cannot be factored out is the "context" struct pointer
pointing at structs of different types. Maybe we could
#define v4l2_get_ctrl_ptr(ctx, member, id) \
__v4l2_get_ctrl_ptr((ctx), offsetof(typeof(*ctx), (member)), (id))
void *__v4l2_get_ctrl_ptr(void *ctx, size_t offset, u32 id)
{
struct v4l2_ctrl_handler *hdl = (struct v4l2_ctrl_handler *)(ctx + offset);
struct v4l2_ctrl *ctrl = v4l2_ctrl_find(hdl, id);
if (!ctrl)
return ERR_PTR(-EINVAL);
return ctrl->p_cur.p;
}
and reuse v4l2_get_ctrl_ptr() in drivers?
A similar kind of void* arithmetic happens in container_of, only with '-'.
> +
> +static int vdec_av1_slice_init_cdf_table(struct vdec_av1_slice_instance *instance)
> +{
> + u8 *remote_cdf_table;
> + struct mtk_vcodec_ctx *ctx;
> + struct vdec_av1_slice_init_vsi *vsi;
> + int ret;
> +
> + ctx = instance->ctx;
> + vsi = instance->vpu.vsi;
> + if (!ctx || !vsi) {
> + mtk_vcodec_err(instance, "invalid ctx or vsi 0x%p 0x%p\n",
> + ctx, vsi);
> + return -EINVAL;
> + }
The above if block is redundant, because - given the current shape of ths driver
code - the condition is never true.
This function is only called from vdec_av1_slice_init(), where both
instance->ctx and instance->vpu.vsi are set to some values. The latter is even
checked for being null before this function is called.
In the caller, instance->ctx is set to whatever the caller receives from its
caller. This perhaps might be checked, but vdec_av1_slice_init() dereferences
ctx without checking anyway (instance->vpu.codec_type = ctx->current_codec;).
So maybe add a check in vdec_av1_slice_init(), or ensure that
vdec_av1_slice_init() is never passed a NULL ctx.
> +
> + remote_cdf_table = mtk_vcodec_fw_map_dm_addr(ctx->dev->fw_handler,
> + (u32)vsi->cdf_table_addr);
> + if (IS_ERR(remote_cdf_table)) {
> + mtk_vcodec_err(instance, "failed to map cdf table\n");
> + return PTR_ERR(remote_cdf_table);
> + }
> +
> + mtk_vcodec_debug(instance, "map cdf table to 0x%p\n",
> + remote_cdf_table);
> +
> + if (instance->cdf_table.va)
> + mtk_vcodec_mem_free(ctx, &instance->cdf_table);
> + instance->cdf_table.size = vsi->cdf_table_size;
> +
> + ret = mtk_vcodec_mem_alloc(ctx, &instance->cdf_table);
> + if (ret)
> + return ret;
> +
> + memcpy(instance->cdf_table.va, remote_cdf_table, vsi->cdf_table_size);
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_init_iq_table(struct vdec_av1_slice_instance *instance)
> +{
> + u8 *remote_iq_table;
> + struct mtk_vcodec_ctx *ctx;
> + struct vdec_av1_slice_init_vsi *vsi;
> + int ret;
> +
> + ctx = instance->ctx;
> + vsi = instance->vpu.vsi;
> + if (!ctx || !vsi) {
> + mtk_vcodec_err(instance, "invalid ctx or vsi 0x%p 0x%p\n",
> + ctx, vsi);
> + return -EINVAL;
> + }
ditto
> +
> + remote_iq_table = mtk_vcodec_fw_map_dm_addr(ctx->dev->fw_handler,
> + (u32)vsi->iq_table_addr);
> + if (IS_ERR(remote_iq_table)) {
> + mtk_vcodec_err(instance, "failed to map iq table\n");
> + return PTR_ERR(remote_iq_table);
> + }
> +
> + mtk_vcodec_debug(instance, "map iq table to 0x%p\n", remote_iq_table);
> +
> + if (instance->iq_table.va)
> + mtk_vcodec_mem_free(ctx, &instance->iq_table);
> + instance->iq_table.size = vsi->iq_table_size;
> +
> + ret = mtk_vcodec_mem_alloc(ctx, &instance->iq_table);
> + if (ret)
> + return ret;
> +
> + memcpy(instance->iq_table.va, remote_iq_table, vsi->iq_table_size);
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_get_new_slot(struct vdec_av1_slice_vsi *vsi)
> +{
> + struct vdec_av1_slice_slot *slots = &vsi->slots;
> + int new_slot_idx = AV1_INVALID_IDX;
> + int i;
> +
> + for (i = 0; i < AV1_MAX_FRAME_BUF_COUNT; i++) {
> + if (slots->frame_info[i].ref_count == 0) {
> + new_slot_idx = i;
> + break;
> + }
> + }
> +
> + if (new_slot_idx != AV1_INVALID_IDX) {
> + slots->frame_info[new_slot_idx].ref_count++;
> + slots->timestamp[new_slot_idx] = vsi->frame.cur_ts;
> + }
> +
> + return new_slot_idx;
> +}
> +
> +static void vdec_av1_slice_clear_fb(struct vdec_av1_slice_frame_info *frame_info)
static inline void?
> +{
> + memset((void *)frame_info, 0, sizeof(struct vdec_av1_slice_frame_info));
> +}
> +
> +static void vdec_av1_slice_decrease_ref_count(struct vdec_av1_slice_slot *slots, int fb_idx)
> +{
> + struct vdec_av1_slice_frame_info *frame_info = slots->frame_info;
> +
> + if (fb_idx < 0 || fb_idx >= AV1_MAX_FRAME_BUF_COUNT) {
> + mtk_v4l2_err("av1_error: %s() invalid fb_idx %d\n", __func__, fb_idx);
> + return;
> + }
The above if block is redundant, because - given the current shape of this
driver code - the condition is never true.
This function is only called from the below vdec_av1_slice_cleanup_slots().
The fb_idx formal param comes from the caller's slot_id local variable, whose
value is only assigned in the for loop, iterating from 0 to
AV1_MAX_FRAME_BUF_COUNT - 1, inclusive. Hence slot_id is never < 0
nor >= AV1_MAX_FRAME_BUF_COUNT.
> +
> + frame_info[fb_idx].ref_count--;
> + if (frame_info[fb_idx].ref_count < 0) {
> + frame_info[fb_idx].ref_count = 0;
> + mtk_v4l2_err("av1_error: %s() fb_idx %d decrease ref_count error\n",
> + __func__, fb_idx);
> + }
> + vdec_av1_slice_clear_fb(&frame_info[fb_idx]);
> +}
> +
> +static void vdec_av1_slice_cleanup_slots(struct vdec_av1_slice_slot *slots,
> + struct vdec_av1_slice_frame *frame,
> + struct v4l2_ctrl_av1_frame *ctrl_fh)
> +{
> + int slot_id, ref_id;
> +
> + for (ref_id = 0; ref_id < V4L2_AV1_TOTAL_REFS_PER_FRAME; ref_id++)
> + frame->ref_frame_map[ref_id] = AV1_INVALID_IDX;
> +
> + for (slot_id = 0; slot_id < AV1_MAX_FRAME_BUF_COUNT; slot_id++) {
> + u64 timestamp = slots->timestamp[slot_id];
> + bool ref_used = false;
> +
> + /* ignored unused slots */
> + if (slots->frame_info[slot_id].ref_count == 0)
> + continue;
> +
> + for (ref_id = 0; ref_id < V4L2_AV1_TOTAL_REFS_PER_FRAME; ref_id++) {
> + if (ctrl_fh->reference_frame_ts[ref_id] == timestamp) {
> + frame->ref_frame_map[ref_id] = slot_id;
> + ref_used = true;
> + }
> + }
> +
> + if (!ref_used)
> + vdec_av1_slice_decrease_ref_count(slots, slot_id);
> + }
> +}
> +
> +static void vdec_av1_slice_setup_slot(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_vsi *vsi,
> + struct v4l2_ctrl_av1_frame *ctrl_fh)
> +{
> + struct vdec_av1_slice_frame_info *cur_frame_info;
> + struct vdec_av1_slice_uncompressed_header *uh = &vsi->frame.uh;
> + int ref_id;
> +
> + memcpy(&vsi->slots, &instance->slots, sizeof(instance->slots));
> + vdec_av1_slice_cleanup_slots(&vsi->slots, &vsi->frame, ctrl_fh);
> + vsi->slot_id = vdec_av1_slice_get_new_slot(vsi);
> +
> + if (vsi->slot_id == AV1_INVALID_IDX) {
> + mtk_v4l2_err("warning:av1 get invalid index slot\n");
> + vsi->slot_id = 0;
> + }
> + cur_frame_info = &vsi->slots.frame_info[vsi->slot_id];
> + cur_frame_info->frame_type = uh->frame_type;
> + cur_frame_info->frame_is_intra = ((uh->frame_type == AV1_INTRA_ONLY_FRAME) ||
> + (uh->frame_type == AV1_KEY_FRAME));
> + cur_frame_info->order_hint = uh->order_hint;
> + cur_frame_info->upscaled_width = uh->upscaled_width;
> + cur_frame_info->pic_pitch = 0;
> + cur_frame_info->frame_width = uh->frame_width;
> + cur_frame_info->frame_height = uh->frame_height;
> + cur_frame_info->mi_cols = ((uh->frame_width + 7) >> 3) << 1;
> + cur_frame_info->mi_rows = ((uh->frame_height + 7) >> 3) << 1;
> +
> + /* ensure current frame is properly mapped if referenced */
> + for (ref_id = 0; ref_id < V4L2_AV1_TOTAL_REFS_PER_FRAME; ref_id++) {
> + u64 timestamp = vsi->slots.timestamp[vsi->slot_id];
> +
> + if (ctrl_fh->reference_frame_ts[ref_id] == timestamp)
> + vsi->frame.ref_frame_map[ref_id] = vsi->slot_id;
> + }
> +}
> +
> +static int vdec_av1_slice_alloc_working_buffer(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_vsi *vsi)
> +{
> + struct mtk_vcodec_ctx *ctx = instance->ctx;
> + struct vdec_av1_slice_work_buffer *work_buffer = vsi->work_buffer;
> + enum vdec_av1_slice_resolution_level level;
> + u32 max_sb_w, max_sb_h, max_w, max_h, w, h;
> + size_t size;
> + int i, ret;
> +
> + w = vsi->frame.uh.frame_width;
> + h = vsi->frame.uh.frame_height;
> +
> + if (w > VCODEC_DEC_4K_CODED_WIDTH || h > VCODEC_DEC_4K_CODED_HEIGHT)
> + /* 8K */
> + return -EINVAL;
> +
> + if (w > MTK_VDEC_MAX_W || h > MTK_VDEC_MAX_H) {
> + /* 4K */
> + level = AV1_RES_4K;
> + max_w = VCODEC_DEC_4K_CODED_WIDTH;
> + max_h = VCODEC_DEC_4K_CODED_HEIGHT;
> + } else {
> + /* FHD */
> + level = AV1_RES_FHD;
> + max_w = MTK_VDEC_MAX_W;
> + max_h = MTK_VDEC_MAX_H;
> + }
> +
> + if (level == instance->level)
> + return 0;
> +
> + mtk_vcodec_debug(instance, "resolution level changed from %u to %u, %ux%u",
> + instance->level, level, w, h);
> +
> + max_sb_w = DIV_ROUND_UP(max_w, 128);
> + max_sb_h = DIV_ROUND_UP(max_h, 128);
> + size = max_sb_w * max_sb_h * SZ_1K;
> + for (i = 0; i < AV1_MAX_FRAME_BUF_COUNT; i++) {
> + if (instance->mv[i].va)
> + mtk_vcodec_mem_free(ctx, &instance->mv[i]);
> + instance->mv[i].size = size;
> + ret = mtk_vcodec_mem_alloc(ctx, &instance->mv[i]);
> + if (ret)
> + goto err;
Please ignore this comment if this has been discussed and settled.
Maybe it's just me, but I feel it is idiomatic in the kernel to
undo all previous allocations if at some iteration we fail. Here a different
approach is taken: we stop iterating and return an error, and free next time
we are called. Why?
> + work_buffer[i].mv_addr.buf = instance->mv[i].dma_addr;
> + work_buffer[i].mv_addr.size = size; > + }
> +
> + size = max_sb_w * max_sb_h * 512;
> + for (i = 0; i < AV1_MAX_FRAME_BUF_COUNT; i++) {
> + if (instance->seg[i].va)
> + mtk_vcodec_mem_free(ctx, &instance->seg[i]);
> + instance->seg[i].size = size;
> + ret = mtk_vcodec_mem_alloc(ctx, &instance->seg[i]);
> + if (ret)
> + goto err;
> + work_buffer[i].segid_addr.buf = instance->seg[i].dma_addr;
> + work_buffer[i].segid_addr.size = size;
> + }
> +
> + size = 16384;
#define a named constant for this magic number?
> + for (i = 0; i < AV1_MAX_FRAME_BUF_COUNT; i++) {
> + if (instance->cdf[i].va)
> + mtk_vcodec_mem_free(ctx, &instance->cdf[i]);
> + instance->cdf[i].size = size;
> + ret = mtk_vcodec_mem_alloc(ctx, &instance->cdf[i]);
> + if (ret)
> + goto err;
> + work_buffer[i].cdf_addr.buf = instance->cdf[i].dma_addr;
> + work_buffer[i].cdf_addr.size = size;
> + }
The 3 for loops are supposed to iterate from 0 to AV1_MAX_FRAME_BUF_COUNT - 1,
inclusive. Is it possible to merge them?
> + if (!instance->cdf_temp.va) {
> + instance->cdf_temp.size = (SZ_1K * 16 * 100);
> + ret = mtk_vcodec_mem_alloc(ctx, &instance->cdf_temp);
> + if (ret)
> + goto err;
> + vsi->cdf_tmp.buf = instance->cdf_temp.dma_addr;
> + vsi->cdf_tmp.size = instance->cdf_temp.size;
> + }
> + size = AV1_TILE_BUF_SIZE * V4L2_AV1_MAX_TILE_COUNT;
This "size" is never changed until the end of this function.
It is a compile-time constant, so there's no need to assign its
value to an intermediate variable.
> +
> + if (instance->tile.va)
> + mtk_vcodec_mem_free(ctx, &instance->tile);
> + instance->tile.size = size;
instance->tile.size = AV1_TILE_BUF_SIZE * V4L2_AV1_MAX_TILE_COUNT;
> +
> + ret = mtk_vcodec_mem_alloc(ctx, &instance->tile);
> + if (ret)
> + goto err;
> +
> + vsi->tile.buf = instance->tile.dma_addr;
> + vsi->tile.size = size;
vsi->tile.size = instance->tile.size;
and now it is clear the size in vsi is the same as the one in instance.
BTW, is vsi->tile.size supposed to always be equal to the one in instance?
If yes:
- Is instance available whenever we need to access vsi->tile.size?
- What's the point of duplicating this value? Can it be stored in one place?
> +
> + instance->level = level;
> + return 0;
> +
> +err:
> + instance->level = AV1_RES_NONE;
> + return ret;
> +}
> +
> +static void vdec_av1_slice_free_working_buffer(struct vdec_av1_slice_instance *instance)
> +{
> + struct mtk_vcodec_ctx *ctx = instance->ctx;
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(instance->mv); i++)
> + if (instance->mv[i].va)
> + mtk_vcodec_mem_free(ctx, &instance->mv[i]);
Perhaps mtk_vcodec_mem_free() can properly handle the case
(!instance->mv[i].va) ? This would eliminate 7 of 20 lines of code
in this function.
> +
> + for (i = 0; i < ARRAY_SIZE(instance->seg); i++)
> + if (instance->seg[i].va)
> + mtk_vcodec_mem_free(ctx, &instance->seg[i]);
> +
> + for (i = 0; i < ARRAY_SIZE(instance->cdf); i++)
> + if (instance->cdf[i].va)
> + mtk_vcodec_mem_free(ctx, &instance->cdf[i]);
> +
> + if (instance->tile.va)
> + mtk_vcodec_mem_free(ctx, &instance->tile);
> + if (instance->cdf_temp.va)
> + mtk_vcodec_mem_free(ctx, &instance->cdf_temp);
> + if (instance->cdf_table.va)
> + mtk_vcodec_mem_free(ctx, &instance->cdf_table);
> + if (instance->iq_table.va)
> + mtk_vcodec_mem_free(ctx, &instance->iq_table);
> +
> + instance->level = AV1_RES_NONE;
> +}
> +
> +static void vdec_av1_slice_vsi_from_remote(struct vdec_av1_slice_vsi *vsi,
> + struct vdec_av1_slice_vsi *remote_vsi)
static inline void?
> +{
> + memcpy(&vsi->trans, &remote_vsi->trans, sizeof(vsi->trans));
> + memcpy(&vsi->state, &remote_vsi->state, sizeof(vsi->state));
> +}
> +
> +static void vdec_av1_slice_vsi_to_remote(struct vdec_av1_slice_vsi *vsi,
> + struct vdec_av1_slice_vsi *remote_vsi)
static inline void?
> +{
> + memcpy(remote_vsi, vsi, sizeof(*vsi));
> +}
> +
> +static int vdec_av1_slice_setup_lat_from_src_buf(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_vsi *vsi,
> + struct vdec_lat_buf *lat_buf)
> +{
> + struct vb2_v4l2_buffer *src;
> + struct vb2_v4l2_buffer *dst;
> +
> + src = v4l2_m2m_next_src_buf(instance->ctx->m2m_ctx);
> + if (!src)
> + return -EINVAL;
> +
> + lat_buf->src_buf_req = src->vb2_buf.req_obj.req;
> + dst = &lat_buf->ts_info;
the "ts_info" actually contains a struct vb2_v4l2_buffer. Why such a name?
> + v4l2_m2m_buf_copy_metadata(src, dst, true);
> + vsi->frame.cur_ts = dst->vb2_buf.timestamp;
> +
> + return 0;
> +}
> +
> +static short vdec_av1_slice_resolve_divisor_32(u32 D, short *shift)
> +{
> + int f;
> + int e;
> +
> + *shift = vdec_av1_slice_get_msb(D);
> + /* e is obtained from D after resetting the most significant 1 bit. */
> + e = D - ((u32)1 << *shift);
> + /* Get the most significant DIV_LUT_BITS (8) bits of e into f */
> + if (*shift > DIV_LUT_BITS)
> + f = AV1_DIV_ROUND_UP_POW2(e, *shift - DIV_LUT_BITS);
> + else
> + f = e << (DIV_LUT_BITS - *shift);
> + if (f > DIV_LUT_NUM)
> + return -1;
> + *shift += DIV_LUT_PREC_BITS;
> + /* Use f as lookup into the precomputed table of multipliers */
> + return div_lut[f];
> +}
> +
> +static void vdec_av1_slice_get_shear_params(struct vdec_av1_slice_gm *gm_params)
> +{
> + const int *mat = gm_params->wmmat;
> + short shift;
> + short y;
> + long long gv, dv;
> +
> + if (gm_params->wmmat[2] <= 0)
> + return;
> +
> + gm_params->alpha = clamp_val(mat[2] - (1 << WARPEDMODEL_PREC_BITS), S16_MIN, S16_MAX);
> + gm_params->beta = clamp_val(mat[3], S16_MIN, S16_MAX);
> +
> + y = vdec_av1_slice_resolve_divisor_32(abs(mat[2]), &shift) * (mat[2] < 0 ? -1 : 1);
> +
> + gv = ((long long)mat[4] * (1 << WARPEDMODEL_PREC_BITS)) * y;
> + gm_params->gamma = clamp_val((int)AV1_DIV_ROUND_UP_POW2_SIGNED(gv, shift),
> + S16_MIN, S16_MAX);
> +
> + dv = ((long long)mat[3] * mat[4]) * y;
> + gm_params->delta = clamp_val(mat[5] - (int)AV1_DIV_ROUND_UP_POW2_SIGNED(dv, shift) -
> + (1 << WARPEDMODEL_PREC_BITS), S16_MIN, S16_MAX);
> +
> + gm_params->alpha = AV1_DIV_ROUND_UP_POW2_SIGNED(gm_params->alpha, WARP_PARAM_REDUCE_BITS) *
> + (1 << WARP_PARAM_REDUCE_BITS);
> + gm_params->beta = AV1_DIV_ROUND_UP_POW2_SIGNED(gm_params->beta, WARP_PARAM_REDUCE_BITS) *
> + (1 << WARP_PARAM_REDUCE_BITS);
> + gm_params->gamma = AV1_DIV_ROUND_UP_POW2_SIGNED(gm_params->gamma, WARP_PARAM_REDUCE_BITS) *
> + (1 << WARP_PARAM_REDUCE_BITS);
> + gm_params->delta = AV1_DIV_ROUND_UP_POW2_SIGNED(gm_params->delta, WARP_PARAM_REDUCE_BITS) *
> + (1 << WARP_PARAM_REDUCE_BITS);
> +}
> +
> +static void vdec_av1_slice_setup_gm(struct vdec_av1_slice_gm *gm,
> + struct v4l2_av1_global_motion *ctrl_gm)
> +{
> + u32 i, j;
> +
> + for (i = 0; i < V4L2_AV1_TOTAL_REFS_PER_FRAME; i++) {
> + gm[i].wmtype = ctrl_gm->type[i];
> + for (j = 0; j < 6; j++)
Maybe #define this magic 6?
> + gm[i].wmmat[j] = ctrl_gm->params[i][j];
> +
> + gm[i].invalid = !!(ctrl_gm->invalid & BIT(i));
> + gm[i].alpha = 0;
> + gm[i].beta = 0;
> + gm[i].gamma = 0;
> + gm[i].delta = 0;
> + if (gm[i].wmtype <= 3)
And this 3?
> + vdec_av1_slice_get_shear_params(&gm[i]);
> + }
> +}
> +
> +static void vdec_av1_slice_setup_seg(struct vdec_av1_slice_seg *seg,
> + struct v4l2_av1_segmentation *ctrl_seg)
> +{
> + u32 i, j;
> +
> + seg->segmentation_enabled = SEGMENTATION_FLAG(ctrl_seg, ENABLED);
> + seg->segmentation_update_map = SEGMENTATION_FLAG(ctrl_seg, UPDATE_MAP);
> + seg->segmentation_temporal_update = SEGMENTATION_FLAG(ctrl_seg, TEMPORAL_UPDATE);
> + seg->segmentation_update_data = SEGMENTATION_FLAG(ctrl_seg, UPDATE_DATA);
> + seg->segid_preskip = SEGMENTATION_FLAG(ctrl_seg, SEG_ID_PRE_SKIP);
> + seg->last_active_segid = ctrl_seg->last_active_seg_id;
> +
> + for (i = 0; i < V4L2_AV1_MAX_SEGMENTS; i++) {
> + seg->feature_enabled_mask[i] = ctrl_seg->feature_enabled[i];
> + for (j = 0; j < V4L2_AV1_SEG_LVL_MAX; j++)
> + seg->feature_data[i][j] = ctrl_seg->feature_data[i][j];
> + }
> +}
> +
> +static void vdec_av1_slice_setup_quant(struct vdec_av1_slice_quantization *quant,
> + struct v4l2_av1_quantization *ctrl_quant)
> +{
> + quant->base_q_idx = ctrl_quant->base_q_idx;
> + quant->delta_qydc = ctrl_quant->delta_q_y_dc;
> + quant->delta_qudc = ctrl_quant->delta_q_u_dc;
> + quant->delta_quac = ctrl_quant->delta_q_u_ac;
> + quant->delta_qvdc = ctrl_quant->delta_q_v_dc;
> + quant->delta_qvac = ctrl_quant->delta_q_v_ac;
> + quant->qm_y = ctrl_quant->qm_y;
> + quant->qm_u = ctrl_quant->qm_u;
> + quant->qm_v = ctrl_quant->qm_v;
Can a common struct be introduced to hold these parameters?
And then copied in one go?
Maybe there's a good reason the code is the way it is now. However,
a series of "dumb" assignments (no value modifications) makes me wonder.
> + quant->using_qmatrix = QUANT_FLAG(ctrl_quant, USING_QMATRIX);
> +}
> +
> +static int vdec_av1_slice_get_qindex(struct vdec_av1_slice_uncompressed_header *uh,
> + int segmentation_id)
> +{
> + struct vdec_av1_slice_seg *seg = &uh->seg;
> + struct vdec_av1_slice_quantization *quant = &uh->quant;
> + int data = 0, qindex = 0;
> +
> + if (seg->segmentation_enabled &&
> + (seg->feature_enabled_mask[segmentation_id] & BIT(SEG_LVL_ALT_Q))) {
> + data = seg->feature_data[segmentation_id][SEG_LVL_ALT_Q];
> + qindex = quant->base_q_idx + data;
> + return clamp_val(qindex, 0, MAXQ);
> + }
> +
> + return quant->base_q_idx;
> +}
> +
> +static void vdec_av1_slice_setup_lr(struct vdec_av1_slice_lr *lr,
> + struct v4l2_av1_loop_restoration *ctrl_lr)
> +{
> + int i;
> +
> + lr->use_lr = 0;
> + lr->use_chroma_lr = 0;
> + for (i = 0; i < V4L2_AV1_NUM_PLANES_MAX; i++) {
> + lr->frame_restoration_type[i] = ctrl_lr->frame_restoration_type[i];
> + lr->loop_restoration_size[i] = ctrl_lr->loop_restoration_size[i];
> + if (lr->frame_restoration_type[i]) {
> + lr->use_lr = 1;
> + if (i > 0)
> + lr->use_chroma_lr = 1;
> + }
> + }
> +}
> +
> +static void vdec_av1_slice_setup_lf(struct vdec_av1_slice_loop_filter *lf,
> + struct v4l2_av1_loop_filter *ctrl_lf)
> +{
> + int i;
> +
> + for (i = 0; i < ARRAY_SIZE(lf->loop_filter_level); i++)
> + lf->loop_filter_level[i] = ctrl_lf->level[i];
> +
> + for (i = 0; i < V4L2_AV1_TOTAL_REFS_PER_FRAME; i++)
> + lf->loop_filter_ref_deltas[i] = ctrl_lf->ref_deltas[i];
> +
> + for (i = 0; i < ARRAY_SIZE(lf->loop_filter_mode_deltas); i++)
> + lf->loop_filter_mode_deltas[i] = ctrl_lf->mode_deltas[i];
> +
> + lf->loop_filter_sharpness = ctrl_lf->sharpness;
> + lf->loop_filter_delta_enabled =
> + BIT_FLAG(ctrl_lf, V4L2_AV1_LOOP_FILTER_FLAG_DELTA_ENABLED);
> +}
> +
> +static void vdec_av1_slice_setup_cdef(struct vdec_av1_slice_cdef *cdef,
> + struct v4l2_av1_cdef *ctrl_cdef)
> +{
> + int i;
> +
> + cdef->cdef_damping = ctrl_cdef->damping_minus_3 + 3;
> + cdef->cdef_bits = ctrl_cdef->bits;
> +
> + for (i = 0; i < V4L2_AV1_CDEF_MAX; i++) {
> + if (ctrl_cdef->y_sec_strength[i] == 4)
> + ctrl_cdef->y_sec_strength[i] -= 1;
> +
> + if (ctrl_cdef->uv_sec_strength[i] == 4)
> + ctrl_cdef->uv_sec_strength[i] -= 1;
> +
> + cdef->cdef_y_strength[i] =
> + ctrl_cdef->y_pri_strength[i] << SECONDARY_FILTER_STRENGTH_NUM_BITS |
> + ctrl_cdef->y_sec_strength[i];
> + cdef->cdef_uv_strength[i] =
> + ctrl_cdef->uv_pri_strength[i] << SECONDARY_FILTER_STRENGTH_NUM_BITS |
> + ctrl_cdef->uv_sec_strength[i];
> + }
> +}
Both vdec_av1_slice_setup_lf() and vdec_av1_slice_setup_cdef():
I'm wondering if the user of struct vdec_av1_slice_loop_filter and struct
vdec_av1_slice_cdef could work with the uAPI variants of these structs? Is there
a need for driver-specific mutations? (Maybe there is, the driver's author
should know).
> +
> +static void vdec_av1_slice_setup_seq(struct vdec_av1_slice_seq_header *seq,
> + struct v4l2_ctrl_av1_sequence *ctrl_seq)
> +{
> + seq->bitdepth = ctrl_seq->bit_depth;
> + seq->max_frame_width = ctrl_seq->max_frame_width_minus_1 + 1;
> + seq->max_frame_height = ctrl_seq->max_frame_height_minus_1 + 1;
> + seq->enable_superres = SEQUENCE_FLAG(ctrl_seq, ENABLE_SUPERRES);
> + seq->enable_filter_intra = SEQUENCE_FLAG(ctrl_seq, ENABLE_FILTER_INTRA);
> + seq->enable_intra_edge_filter = SEQUENCE_FLAG(ctrl_seq, ENABLE_INTRA_EDGE_FILTER);
> + seq->enable_interintra_compound = SEQUENCE_FLAG(ctrl_seq, ENABLE_INTERINTRA_COMPOUND);
> + seq->enable_masked_compound = SEQUENCE_FLAG(ctrl_seq, ENABLE_MASKED_COMPOUND);
> + seq->enable_dual_filter = SEQUENCE_FLAG(ctrl_seq, ENABLE_DUAL_FILTER);
> + seq->enable_jnt_comp = SEQUENCE_FLAG(ctrl_seq, ENABLE_JNT_COMP);
> + seq->mono_chrome = SEQUENCE_FLAG(ctrl_seq, MONO_CHROME);
> + seq->enable_order_hint = SEQUENCE_FLAG(ctrl_seq, ENABLE_ORDER_HINT);
> + seq->order_hint_bits = ctrl_seq->order_hint_bits;
> + seq->use_128x128_superblock = SEQUENCE_FLAG(ctrl_seq, USE_128X128_SUPERBLOCK);
> + seq->subsampling_x = SEQUENCE_FLAG(ctrl_seq, SUBSAMPLING_X);
> + seq->subsampling_y = SEQUENCE_FLAG(ctrl_seq, SUBSAMPLING_Y);
> +}
> +
> +static void vdec_av1_slice_setup_tile(struct vdec_av1_slice_frame *frame,
> + struct v4l2_av1_tile_info *ctrl_tile)
> +{
> + struct vdec_av1_slice_seq_header *seq = &frame->seq;
> + struct vdec_av1_slice_tile *tile = &frame->uh.tile;
> + u32 mib_size_log2 = seq->use_128x128_superblock ? 5 : 4;
> + int i;
> +
> + tile->tile_cols = ctrl_tile->tile_cols;
> + tile->tile_rows = ctrl_tile->tile_rows;
> + tile->context_update_tile_id = ctrl_tile->context_update_tile_id;
> + tile->uniform_tile_spacing_flag =
> + BIT_FLAG(ctrl_tile, V4L2_AV1_TILE_INFO_FLAG_UNIFORM_TILE_SPACING);
> +
> + for (i = 0; i < tile->tile_cols + 1; i++)
> + tile->mi_col_starts[i] =
> + ALIGN(ctrl_tile->mi_col_starts[i], BIT(mib_size_log2)) >> mib_size_log2;
> +
> + for (i = 0; i < tile->tile_rows + 1; i++)
> + tile->mi_row_starts[i] =
> + ALIGN(ctrl_tile->mi_row_starts[i], BIT(mib_size_log2)) >> mib_size_log2;
> +}
> +
> +static void vdec_av1_slice_setup_uh(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_frame *frame,
> + struct v4l2_ctrl_av1_frame *ctrl_fh)
> +{
> + struct vdec_av1_slice_uncompressed_header *uh = &frame->uh;
> + int i;
> +
> + uh->use_ref_frame_mvs = FH_FLAG(ctrl_fh, USE_REF_FRAME_MVS);
> + uh->order_hint = ctrl_fh->order_hint;
> + vdec_av1_slice_setup_gm(uh->gm, &ctrl_fh->global_motion);
> + uh->upscaled_width = ctrl_fh->upscaled_width;
> + uh->frame_width = ctrl_fh->frame_width_minus_1 + 1;
> + uh->frame_height = ctrl_fh->frame_height_minus_1 + 1;
> + uh->mi_cols = ((uh->frame_width + 7) >> 3) << 1;
> + uh->mi_rows = ((uh->frame_height + 7) >> 3) << 1;
> + uh->reduced_tx_set = FH_FLAG(ctrl_fh, REDUCED_TX_SET);
> + uh->tx_mode = ctrl_fh->tx_mode;
> + uh->uniform_tile_spacing_flag = FH_FLAG(ctrl_fh, UNIFORM_TILE_SPACING);
> + uh->interpolation_filter = ctrl_fh->interpolation_filter;
> + uh->allow_warped_motion = FH_FLAG(ctrl_fh, ALLOW_WARPED_MOTION);
> + uh->is_motion_mode_switchable = FH_FLAG(ctrl_fh, IS_MOTION_MODE_SWITCHABLE);
> + uh->frame_type = ctrl_fh->frame_type;
> + uh->frame_is_intra = (uh->frame_type == V4L2_AV1_INTRA_ONLY_FRAME ||
> + uh->frame_type == V4L2_AV1_KEY_FRAME);
> +
> + if (!uh->frame_is_intra && FH_FLAG(ctrl_fh, REFERENCE_SELECT))
> + uh->reference_mode = AV1_REFERENCE_MODE_SELECT;
> + else
> + uh->reference_mode = AV1_SINGLE_REFERENCE;
> +
> + uh->allow_high_precision_mv = FH_FLAG(ctrl_fh, ALLOW_HIGH_PRECISION_MV);
> + uh->allow_intra_bc = FH_FLAG(ctrl_fh, ALLOW_INTRABC);
> + uh->force_integer_mv = FH_FLAG(ctrl_fh, FORCE_INTEGER_MV);
> + uh->allow_screen_content_tools = FH_FLAG(ctrl_fh, ALLOW_SCREEN_CONTENT_TOOLS);
> + uh->error_resilient_mode = FH_FLAG(ctrl_fh, ERROR_RESILIENT_MODE);
> + uh->primary_ref_frame = ctrl_fh->primary_ref_frame;
> + uh->disable_frame_end_update_cdf =
> + FH_FLAG(ctrl_fh, DISABLE_FRAME_END_UPDATE_CDF);
> + uh->disable_cdf_update = FH_FLAG(ctrl_fh, DISABLE_CDF_UPDATE);
> + uh->skip_mode.skip_mode_present = FH_FLAG(ctrl_fh, SKIP_MODE_PRESENT);
> + uh->skip_mode.skip_mode_frame[0] =
> + ctrl_fh->skip_mode_frame[0] - V4L2_AV1_REF_LAST_FRAME;
> + uh->skip_mode.skip_mode_frame[1] =
> + ctrl_fh->skip_mode_frame[1] - V4L2_AV1_REF_LAST_FRAME;
> + uh->skip_mode.skip_mode_allowed = ctrl_fh->skip_mode_frame[0] ? 1 : 0;
> +
> + vdec_av1_slice_setup_seg(&uh->seg, &ctrl_fh->segmentation);
> + uh->delta_q_lf.delta_q_present = QUANT_FLAG(&ctrl_fh->quantization, DELTA_Q_PRESENT);
> + uh->delta_q_lf.delta_q_res = 1 << ctrl_fh->quantization.delta_q_res;
> + uh->delta_q_lf.delta_lf_present =
> + BIT_FLAG(&ctrl_fh->loop_filter, V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_PRESENT);
> + uh->delta_q_lf.delta_lf_res = ctrl_fh->loop_filter.delta_lf_res;
> + uh->delta_q_lf.delta_lf_multi =
> + BIT_FLAG(&ctrl_fh->loop_filter, V4L2_AV1_LOOP_FILTER_FLAG_DELTA_LF_MULTI);
> + vdec_av1_slice_setup_quant(&uh->quant, &ctrl_fh->quantization);
> +
> + uh->coded_loss_less = 1;
> + for (i = 0; i < V4L2_AV1_MAX_SEGMENTS; i++) {
> + uh->quant.qindex[i] = vdec_av1_slice_get_qindex(uh, i);
> + uh->loss_less_array[i] =
> + (uh->quant.qindex[i] == 0 && uh->quant.delta_qydc == 0 &&
> + uh->quant.delta_quac == 0 && uh->quant.delta_qudc == 0 &&
> + uh->quant.delta_qvac == 0 && uh->quant.delta_qvdc == 0);
> +
> + if (!uh->loss_less_array[i])
> + uh->coded_loss_less = 0;
> + }
> +
> + vdec_av1_slice_setup_lr(&uh->lr, &ctrl_fh->loop_restoration);
> + uh->superres_denom = ctrl_fh->superres_denom;
> + vdec_av1_slice_setup_lf(&uh->loop_filter, &ctrl_fh->loop_filter);
> + vdec_av1_slice_setup_cdef(&uh->cdef, &ctrl_fh->cdef);
> + vdec_av1_slice_setup_tile(frame, &ctrl_fh->tile_info);
> +}
> +
> +static int vdec_av1_slice_setup_tile_group(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_vsi *vsi)
> +{
> + struct v4l2_ctrl_av1_tile_group_entry *ctrl_tge;
> + struct vdec_av1_slice_tile_group *tile_group = &instance->tile_group;
> + struct vdec_av1_slice_uncompressed_header *uh = &vsi->frame.uh;
> + struct vdec_av1_slice_tile *tile = &uh->tile;
> + struct v4l2_ctrl *ctrl;
> + u32 tge_size;
> + int i;
> +
> + ctrl = v4l2_ctrl_find(&instance->ctx->ctrl_hdl, V4L2_CID_STATELESS_AV1_TILE_GROUP_ENTRY);
> + if (!ctrl)
> + return -EINVAL;
> +
> + tge_size = ctrl->elems;
> + ctrl_tge = (struct v4l2_ctrl_av1_tile_group_entry *)ctrl->p_cur.p;
> +
> + tile_group->num_tiles = tile->tile_cols * tile->tile_rows;
> +
> + if (tile_group->num_tiles != tge_size ||
> + tile_group->num_tiles > V4L2_AV1_MAX_TILE_COUNT) {
> + mtk_vcodec_err(instance, "invalid tge_size %d, tile_num:%d\n",
> + tge_size, tile_group->num_tiles);
> + return -EINVAL;
> + }
> +
> + for (i = 0; i < tge_size; i++) {
> + if (i != ctrl_tge[i].tile_row * vsi->frame.uh.tile.tile_cols +
> + ctrl_tge[i].tile_col) {
> + mtk_vcodec_err(instance, "invalid tge info %d, %d %d %d\n",
> + i, ctrl_tge[i].tile_row, ctrl_tge[i].tile_col,
> + vsi->frame.uh.tile.tile_rows);
> + return -EINVAL;
> + }
> + tile_group->tile_size[i] = ctrl_tge[i].tile_size;
> + tile_group->tile_start_offset[i] = ctrl_tge[i].tile_offset;
> + }
> +
> + return 0;
> +}
> +
> +static void vdec_av1_slice_setup_state(struct vdec_av1_slice_vsi *vsi)
static inline void?
> +{
> + memset(&vsi->state, 0, sizeof(vsi->state));
> +}
> +
> +static void vdec_av1_slice_setup_scale_factors(struct vdec_av1_slice_frame_refs *frame_ref,
> + struct vdec_av1_slice_frame_info *ref_frame_info,
> + struct vdec_av1_slice_uncompressed_header *uh)
> +{
> + struct vdec_av1_slice_scale_factors *scale_factors = &frame_ref->scale_factors;
> + u32 ref_upscaled_width = ref_frame_info->upscaled_width;
> + u32 ref_frame_height = ref_frame_info->frame_height;
> + u32 frame_width = uh->frame_width;
> + u32 frame_height = uh->frame_height;
> +
> + if (!vdec_av1_slice_need_scale(ref_upscaled_width, ref_frame_height,
> + frame_width, frame_height)) {
> + scale_factors->x_scale = -1;
> + scale_factors->y_scale = -1;
> + scale_factors->is_scaled = 0;
> + return;
> + }
> +
> + scale_factors->x_scale =
> + ((ref_upscaled_width << AV1_REF_SCALE_SHIFT) + (frame_width >> 1)) / frame_width;
> + scale_factors->y_scale =
> + ((ref_frame_height << AV1_REF_SCALE_SHIFT) + (frame_height >> 1)) / frame_height;
> + scale_factors->is_scaled =
> + (scale_factors->x_scale != AV1_REF_INVALID_SCALE) &&
> + (scale_factors->y_scale != AV1_REF_INVALID_SCALE) &&
> + (scale_factors->x_scale != AV1_REF_NO_SCALE ||
> + scale_factors->y_scale != AV1_REF_NO_SCALE);
> + scale_factors->x_step =
> + AV1_DIV_ROUND_UP_POW2(scale_factors->x_scale,
> + AV1_REF_SCALE_SHIFT - AV1_SCALE_SUBPEL_BITS);
> + scale_factors->y_step =
> + AV1_DIV_ROUND_UP_POW2(scale_factors->y_scale,
> + AV1_REF_SCALE_SHIFT - AV1_SCALE_SUBPEL_BITS);
> +}
> +
> +static int vdec_av1_slice_get_relative_dist(int a, int b, u8 enable_order_hint, u8 order_hint_bits)
> +{
> + int diff = 0;
> + int m = 0;
> +
> + if (!enable_order_hint)
> + return 0;
> +
> + diff = a - b;
> + m = 1 << (order_hint_bits - 1);
> + diff = (diff & (m - 1)) - (diff & m);
> +
> + return diff;
> +}
This function is called in one place only, and its result needs to be
interpreted at call site. Can it return the result in a form expected
at call site...
> +
> +static void vdec_av1_slice_setup_ref(struct vdec_av1_slice_pfc *pfc,
> + struct v4l2_ctrl_av1_frame *ctrl_fh)
> +{
> + struct vdec_av1_slice_vsi *vsi = &pfc->vsi;
> + struct vdec_av1_slice_frame *frame = &vsi->frame;
> + struct vdec_av1_slice_slot *slots = &vsi->slots;
> + struct vdec_av1_slice_uncompressed_header *uh = &frame->uh;
> + struct vdec_av1_slice_seq_header *seq = &frame->seq;
> + struct vdec_av1_slice_frame_info *cur_frame_info =
> + &slots->frame_info[vsi->slot_id];
> + struct vdec_av1_slice_frame_info *frame_info;
> + int i, slot_id;
> +
> + if (uh->frame_is_intra)
> + return;
> +
> + for (i = 0; i < V4L2_AV1_REFS_PER_FRAME; i++) {
> + int ref_idx = ctrl_fh->ref_frame_idx[i];
> +
> + pfc->ref_idx[i] = ctrl_fh->reference_frame_ts[ref_idx];
> + slot_id = frame->ref_frame_map[ref_idx];
> + frame_info = &slots->frame_info[slot_id];
> + if (slot_id == AV1_INVALID_IDX) {
> + mtk_v4l2_err("cannot match reference[%d] 0x%llx\n", i,
> + ctrl_fh->reference_frame_ts[ref_idx]);
> + frame->order_hints[i] = 0;
> + frame->ref_frame_valid[i] = 0;
> + continue;
> + }
> +
> + frame->frame_refs[i].ref_fb_idx = slot_id;
> + vdec_av1_slice_setup_scale_factors(&frame->frame_refs[i],
> + frame_info, uh);
> + if (!seq->enable_order_hint)
> + frame->ref_frame_sign_bias[i + 1] = 0;
> + else
> + frame->ref_frame_sign_bias[i + 1] =
> + vdec_av1_slice_get_relative_dist(frame_info->order_hint,
> + uh->order_hint,
> + seq->enable_order_hint,
> + seq->order_hint_bits)
> + <= 0 ? 0 : 1;
... to get rid of this tri-argument operator altogether?
> +
> + frame->order_hints[i] = ctrl_fh->order_hints[i + 1];
> + cur_frame_info->order_hints[i] = frame->order_hints[i];
> + frame->ref_frame_valid[i] = 1;
> + }
> +}
> +
> +static void vdec_av1_slice_get_previous(struct vdec_av1_slice_vsi *vsi)
> +{
> + struct vdec_av1_slice_frame *frame = &vsi->frame;
> +
> + if (frame->uh.primary_ref_frame == 7)
#define magic number 7?
> + frame->prev_fb_idx = AV1_INVALID_IDX;
> + else
> + frame->prev_fb_idx = frame->frame_refs[frame->uh.primary_ref_frame].ref_fb_idx;
> +}
> +
> +static void vdec_av1_slice_setup_operating_mode(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_frame *frame)
static inline void?
> +{
> + frame->large_scale_tile = 0;
> +}
> +
> +static int vdec_av1_slice_setup_pfc(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_pfc *pfc)
> +{
> + struct v4l2_ctrl_av1_frame *ctrl_fh;
> + struct v4l2_ctrl_av1_sequence *ctrl_seq;
> + struct vdec_av1_slice_vsi *vsi = &pfc->vsi;
> + int ret = 0;
> +
> + /* frame header */
> + ctrl_fh = (struct v4l2_ctrl_av1_frame *)
> + vdec_av1_get_ctrl_ptr(instance->ctx,
> + V4L2_CID_STATELESS_AV1_FRAME);
> + if (IS_ERR(ctrl_fh))
> + return PTR_ERR(ctrl_fh);
> +
> + ctrl_seq = (struct v4l2_ctrl_av1_sequence *)
> + vdec_av1_get_ctrl_ptr(instance->ctx,
> + V4L2_CID_STATELESS_AV1_SEQUENCE);
> + if (IS_ERR(ctrl_seq))
> + return PTR_ERR(ctrl_seq);
Just to make sure: I assume request api is used? If so, does vdec's framework
ensure that v4l2_ctrl_request_setup() has been called? It influences what's
actually in ctrl->p_cur.p (current or previous value), and the
vdec_av1_get_ctrl_ptr() wrapper returns ctrl->p_cur.p.
> +
> + /* setup vsi information */
> + vdec_av1_slice_setup_seq(&vsi->frame.seq, ctrl_seq);
> + vdec_av1_slice_setup_uh(instance, &vsi->frame, ctrl_fh);
> + vdec_av1_slice_setup_operating_mode(instance, &vsi->frame);
> +
> + vdec_av1_slice_setup_state(vsi);
> + vdec_av1_slice_setup_slot(instance, vsi, ctrl_fh);
> + vdec_av1_slice_setup_ref(pfc, ctrl_fh);
> + vdec_av1_slice_get_previous(vsi);
> +
> + pfc->seq = instance->seq;
> + instance->seq++;
> +
> + return ret;
> +}
> +
> +static void vdec_av1_slice_setup_lat_buffer(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_vsi *vsi,
> + struct mtk_vcodec_mem *bs,
> + struct vdec_lat_buf *lat_buf)
> +{
> + struct vdec_av1_slice_work_buffer *work_buffer;
> + int i;
> +
> + vsi->bs.dma_addr = bs->dma_addr;
> + vsi->bs.size = bs->size;
> +
> + vsi->ube.dma_addr = lat_buf->ctx->msg_queue.wdma_addr.dma_addr;
> + vsi->ube.size = lat_buf->ctx->msg_queue.wdma_addr.size;
> + vsi->trans.dma_addr = lat_buf->ctx->msg_queue.wdma_wptr_addr;
> + /* used to store trans end */
> + vsi->trans.dma_addr_end = lat_buf->ctx->msg_queue.wdma_rptr_addr;
> + vsi->err_map.dma_addr = lat_buf->wdma_err_addr.dma_addr;
> + vsi->err_map.size = lat_buf->wdma_err_addr.size;
> + vsi->rd_mv.dma_addr = lat_buf->rd_mv_addr.dma_addr;
> + vsi->rd_mv.size = lat_buf->rd_mv_addr.size;
> +
> + vsi->row_info.buf = 0;
> + vsi->row_info.size = 0;
> +
> + work_buffer = vsi->work_buffer;
> +
> + for (i = 0; i < AV1_MAX_FRAME_BUF_COUNT; i++) {
> + work_buffer[i].mv_addr.buf = instance->mv[i].dma_addr;
> + work_buffer[i].mv_addr.size = instance->mv[i].size;
> + work_buffer[i].segid_addr.buf = instance->seg[i].dma_addr;
> + work_buffer[i].segid_addr.size = instance->seg[i].size;
> + work_buffer[i].cdf_addr.buf = instance->cdf[i].dma_addr;
> + work_buffer[i].cdf_addr.size = instance->cdf[i].size;
> + }
> +
> + vsi->cdf_tmp.buf = instance->cdf_temp.dma_addr;
> + vsi->cdf_tmp.size = instance->cdf_temp.size;
> +
> + vsi->tile.buf = instance->tile.dma_addr;
> + vsi->tile.size = instance->tile.size;
> + memcpy(lat_buf->tile_addr.va, instance->tile.va, 64 * instance->tile_group.num_tiles);
> +
> + vsi->cdf_table.buf = instance->cdf_table.dma_addr;
> + vsi->cdf_table.size = instance->cdf_table.size;
> + vsi->iq_table.buf = instance->iq_table.dma_addr;
> + vsi->iq_table.size = instance->iq_table.size;
> +}
> +
> +static void vdec_av1_slice_setup_seg_buffer(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_vsi *vsi)
> +{
> + struct vdec_av1_slice_uncompressed_header *uh = &vsi->frame.uh;
> + struct mtk_vcodec_mem *buf;
> +
> + /* reset segment buffer */
> + if (uh->primary_ref_frame == 7 || !uh->seg.segmentation_enabled) {
#define magic 7?
> + mtk_vcodec_debug(instance, "reset seg %d\n", vsi->slot_id);
> + if (vsi->slot_id != AV1_INVALID_IDX) {
> + buf = &instance->seg[vsi->slot_id];
> + memset(buf->va, 0, buf->size);
> + }
> + }
> +}
> +
> +static void vdec_av1_slice_setup_tile_buffer(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_vsi *vsi,
> + struct mtk_vcodec_mem *bs)
> +{
> + struct vdec_av1_slice_tile_group *tile_group = &instance->tile_group;
> + struct vdec_av1_slice_uncompressed_header *uh = &vsi->frame.uh;
> + struct vdec_av1_slice_tile *tile = &uh->tile;
> + u32 tile_num, tile_row, tile_col;
> + u32 allow_update_cdf = 0;
> + u32 sb_boundary_x_m1 = 0, sb_boundary_y_m1 = 0;
> + int tile_info_base;
> + u32 tile_buf_pa;
> + u32 *tile_info_buf = instance->tile.va;
> + u32 pa = (u32)bs->dma_addr;
> +
> + if (uh->disable_cdf_update == 0)
> + allow_update_cdf = 1;
> +
> + for (tile_num = 0; tile_num < tile_group->num_tiles; tile_num++) {
> + /* each uint32 takes place of 4 bytes */
> + tile_info_base = (AV1_TILE_BUF_SIZE * tile_num) >> 2;
> + tile_row = tile_num / tile->tile_cols;
> + tile_col = tile_num % tile->tile_cols;
> + tile_info_buf[tile_info_base + 0] = (tile_group->tile_size[tile_num] << 3);
> + tile_buf_pa = pa + tile_group->tile_start_offset[tile_num];
> +
> + tile_info_buf[tile_info_base + 1] = (tile_buf_pa >> 4) << 4;
> + tile_info_buf[tile_info_base + 2] = (tile_buf_pa % 16) << 3;
> +
> + sb_boundary_x_m1 =
> + (tile->mi_col_starts[tile_col + 1] - tile->mi_col_starts[tile_col] - 1) &
> + 0x3f;
> + sb_boundary_y_m1 =
> + (tile->mi_row_starts[tile_row + 1] - tile->mi_row_starts[tile_row] - 1) &
> + 0x1ff;
> +
> + tile_info_buf[tile_info_base + 3] = (sb_boundary_y_m1 << 7) | sb_boundary_x_m1;
> + tile_info_buf[tile_info_base + 4] = ((allow_update_cdf << 18) | (1 << 16));
> +
> + if (tile_num == tile->context_update_tile_id &&
> + uh->disable_frame_end_update_cdf == 0)
> + tile_info_buf[tile_info_base + 4] |= (1 << 17);
> +
> + mtk_vcodec_debug(instance, "// tile buf %d pos(%dx%d) offset 0x%x\n",
> + tile_num, tile_row, tile_col, tile_info_base);
> + mtk_vcodec_debug(instance, "// %08x %08x %08x %08x\n",
> + tile_info_buf[tile_info_base + 0],
> + tile_info_buf[tile_info_base + 1],
> + tile_info_buf[tile_info_base + 2],
> + tile_info_buf[tile_info_base + 3]);
> + mtk_vcodec_debug(instance, "// %08x %08x %08x %08x\n",
> + tile_info_buf[tile_info_base + 4],
> + tile_info_buf[tile_info_base + 5],
> + tile_info_buf[tile_info_base + 6],
> + tile_info_buf[tile_info_base + 7]);
> + }
> +}
> +
> +static int vdec_av1_slice_setup_lat(struct vdec_av1_slice_instance *instance,
> + struct mtk_vcodec_mem *bs,
> + struct vdec_lat_buf *lat_buf,
> + struct vdec_av1_slice_pfc *pfc)
> +{
> + struct vdec_av1_slice_vsi *vsi = &pfc->vsi;
> + int ret;
> +
> + ret = vdec_av1_slice_setup_lat_from_src_buf(instance, vsi, lat_buf);
> + if (ret)
> + return ret;
> +
> + ret = vdec_av1_slice_setup_pfc(instance, pfc);
> + if (ret)
> + return ret;
> +
> + ret = vdec_av1_slice_setup_tile_group(instance, vsi);
> + if (ret)
> + return ret;
> +
> + ret = vdec_av1_slice_alloc_working_buffer(instance, vsi);
> + if (ret)
> + return ret;
> +
> + vdec_av1_slice_setup_seg_buffer(instance, vsi);
> + vdec_av1_slice_setup_tile_buffer(instance, vsi, bs);
> + vdec_av1_slice_setup_lat_buffer(instance, vsi, bs, lat_buf);
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_update_lat(struct vdec_av1_slice_instance *instance,
> + struct vdec_lat_buf *lat_buf,
> + struct vdec_av1_slice_pfc *pfc)
> +{
> + struct vdec_av1_slice_vsi *vsi;
> +
> + vsi = &pfc->vsi;
> + mtk_vcodec_debug(instance, "frame %u LAT CRC 0x%08x, output size is %d\n",
> + pfc->seq, vsi->state.crc[0], vsi->state.out_size);
> +
> + /* buffer full, need to re-decode */
> + if (vsi->state.full) {
> + /* buffer not enough */
> + if (vsi->trans.dma_addr_end - vsi->trans.dma_addr == vsi->ube.size)
> + return -ENOMEM;
> + return -EAGAIN;
> + }
> +
> + instance->width = vsi->frame.uh.upscaled_width;
> + instance->height = vsi->frame.uh.frame_height;
> + instance->frame_type = vsi->frame.uh.frame_type;
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_setup_core_to_dst_buf(struct vdec_av1_slice_instance *instance,
> + struct vdec_lat_buf *lat_buf)
> +{
> + struct vb2_v4l2_buffer *dst;
> +
> + dst = v4l2_m2m_next_dst_buf(instance->ctx->m2m_ctx);
> + if (!dst)
> + return -EINVAL;
> +
> + v4l2_m2m_buf_copy_metadata(&lat_buf->ts_info, dst, true);
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_setup_core_buffer(struct vdec_av1_slice_instance *instance,
> + struct vdec_av1_slice_pfc *pfc,
> + struct vdec_av1_slice_vsi *vsi,
> + struct vdec_fb *fb,
> + struct vdec_lat_buf *lat_buf)
> +{
> + struct vb2_buffer *vb;
> + struct vb2_queue *vq;
> + int w, h, plane, size;
> + int i;
> +
> + plane = instance->ctx->q_data[MTK_Q_DATA_DST].fmt->num_planes;
> + w = vsi->frame.uh.upscaled_width;
> + h = vsi->frame.uh.frame_height;
> + size = ALIGN(w, VCODEC_DEC_ALIGNED_64) * ALIGN(h, VCODEC_DEC_ALIGNED_64);
> +
> + /* frame buffer */
> + vsi->fb.y.dma_addr = fb->base_y.dma_addr;
> + if (plane == 1)
> + vsi->fb.c.dma_addr = fb->base_y.dma_addr + size;
> + else
> + vsi->fb.c.dma_addr = fb->base_c.dma_addr;
> +
> + /* reference buffers */
> + vq = v4l2_m2m_get_vq(instance->ctx->m2m_ctx, V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> + if (!vq)
> + return -EINVAL;
> +
> + /* get current output buffer */
> + vb = &v4l2_m2m_next_dst_buf(instance->ctx->m2m_ctx)->vb2_buf;
> + if (!vb)
> + return -EINVAL;
> +
> + /* get buffer address from vb2buf */
> + for (i = 0; i < V4L2_AV1_REFS_PER_FRAME; i++) {
> + struct vdec_av1_slice_fb *vref = &vsi->ref[i];
> +
> + vb = vb2_find_buffer(vq, pfc->ref_idx[i]);
> + if (!vb) {
> + memset(vref, 0, sizeof(*vref));
> + continue;
> + }
> +
> + vref->y.dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
> + if (plane == 1)
> + vref->c.dma_addr = vref->y.dma_addr + size;
> + else
> + vref->c.dma_addr = vb2_dma_contig_plane_dma_addr(vb, 1);
> + }
> + vsi->tile.dma_addr = lat_buf->tile_addr.dma_addr;
> + vsi->tile.size = lat_buf->tile_addr.size;
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_setup_core(struct vdec_av1_slice_instance *instance,
> + struct vdec_fb *fb,
> + struct vdec_lat_buf *lat_buf,
> + struct vdec_av1_slice_pfc *pfc)
> +{
> + struct vdec_av1_slice_vsi *vsi = &pfc->vsi;
> + int ret;
> +
> + ret = vdec_av1_slice_setup_core_to_dst_buf(instance, lat_buf);
> + if (ret)
> + return ret;
> +
> + ret = vdec_av1_slice_setup_core_buffer(instance, pfc, vsi, fb, lat_buf);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_update_core(struct vdec_av1_slice_instance *instance,
> + struct vdec_lat_buf *lat_buf,
> + struct vdec_av1_slice_pfc *pfc)
> +{
> + struct vdec_av1_slice_vsi *vsi = instance->core_vsi;
> +
> + /* TODO: Do something here, or remove this function entirely */
And?
> +
> + mtk_vcodec_debug(instance, "frame %u Y_CRC %08x %08x %08x %08x\n",
> + pfc->seq, vsi->state.crc[0], vsi->state.crc[1],
> + vsi->state.crc[2], vsi->state.crc[3]);
> + mtk_vcodec_debug(instance, "frame %u C_CRC %08x %08x %08x %08x\n",
> + pfc->seq, vsi->state.crc[8], vsi->state.crc[9],
> + vsi->state.crc[10], vsi->state.crc[11]);
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_init(struct mtk_vcodec_ctx *ctx)
> +{
> + struct vdec_av1_slice_instance *instance;
> + struct vdec_av1_slice_init_vsi *vsi;
> + int ret;
> +
> + instance = kzalloc(sizeof(*instance), GFP_KERNEL);
> + if (!instance)
> + return -ENOMEM;
> +
> + instance->ctx = ctx;
> + instance->vpu.id = SCP_IPI_VDEC_LAT;
> + instance->vpu.core_id = SCP_IPI_VDEC_CORE;
> + instance->vpu.ctx = ctx;
> + instance->vpu.codec_type = ctx->current_codec;
> +
> + ret = vpu_dec_init(&instance->vpu);
> + if (ret) {
> + mtk_vcodec_err(instance, "failed to init vpu dec, ret %d\n", ret);
> + goto error_vpu_init;
> + }
> +
> + /* init vsi and global flags */
> + vsi = instance->vpu.vsi;
> + if (!vsi) {
> + mtk_vcodec_err(instance, "failed to get AV1 vsi\n");
> + ret = -EINVAL;
> + goto error_vsi;
> + }
> + instance->init_vsi = vsi;
> + instance->core_vsi = mtk_vcodec_fw_map_dm_addr(ctx->dev->fw_handler, (u32)vsi->core_vsi);
> +
> + if (!instance->core_vsi) {
> + mtk_vcodec_err(instance, "failed to get AV1 core vsi\n");
> + ret = -EINVAL;
> + goto error_vsi;
> + }
> +
> + if (vsi->vsi_size != sizeof(struct vdec_av1_slice_vsi))
> + mtk_vcodec_err(instance, "remote vsi size 0x%x mismatch! expected: 0x%lx\n",
> + vsi->vsi_size, sizeof(struct vdec_av1_slice_vsi));
> +
> + instance->irq = 1;
Does this mean "irq_enabled"? If so, rename?
> + instance->inneracing_mode = IS_VDEC_INNER_RACING(instance->ctx->dev->dec_capability);
> +
> + mtk_vcodec_debug(instance, "vsi 0x%p core_vsi 0x%llx 0x%p, inneracing_mode %d\n",
> + vsi, vsi->core_vsi, instance->core_vsi, instance->inneracing_mode);
> +
> + ret = vdec_av1_slice_init_cdf_table(instance);
> + if (ret)
> + goto error_vsi;
> +
> + ret = vdec_av1_slice_init_iq_table(instance);
> + if (ret)
> + goto error_vsi;
> +
> + ctx->drv_handle = instance;
> +
> + return 0;
> +error_vsi:
> + vpu_dec_deinit(&instance->vpu);
> +error_vpu_init:
> + kfree(instance);
newline?
> + return ret;
> +}
> +
> +static void vdec_av1_slice_deinit(void *h_vdec)
> +{
> + struct vdec_av1_slice_instance *instance = h_vdec;
> +
> + if (!instance)
> + return;
> + mtk_vcodec_debug(instance, "h_vdec 0x%p\n", h_vdec);
> + vpu_dec_deinit(&instance->vpu);
> + vdec_av1_slice_free_working_buffer(instance);
> + vdec_msg_queue_deinit(&instance->ctx->msg_queue, instance->ctx);
> + kfree(instance);
> +}
> +
> +static int vdec_av1_slice_flush(void *h_vdec, struct mtk_vcodec_mem *bs,
> + struct vdec_fb *fb, bool *res_chg)
> +{
> + struct vdec_av1_slice_instance *instance = h_vdec;
> + int i;
> +
> + mtk_vcodec_debug(instance, "flush ...\n");
> +
> + for (i = 0; i < AV1_MAX_FRAME_BUF_COUNT; i++)
> + vdec_av1_slice_clear_fb(&instance->slots.frame_info[i]);
> +
> + vdec_msg_queue_wait_lat_buf_full(&instance->ctx->msg_queue);
newline?
> + return vpu_dec_reset(&instance->vpu);
> +}
> +
> +static void vdec_av1_slice_get_pic_info(struct vdec_av1_slice_instance *instance)
> +{
> + struct mtk_vcodec_ctx *ctx = instance->ctx;
> + u32 data[3];
> +
> + mtk_vcodec_debug(instance, "w %u h %u\n", ctx->picinfo.pic_w, ctx->picinfo.pic_h);
> +
> + data[0] = ctx->picinfo.pic_w;
> + data[1] = ctx->picinfo.pic_h;
> + data[2] = ctx->capture_fourcc;
> + vpu_dec_get_param(&instance->vpu, data, 3, GET_PARAM_PIC_INFO);
> +
> + ctx->picinfo.buf_w = ALIGN(ctx->picinfo.pic_w, VCODEC_DEC_ALIGNED_64);
> + ctx->picinfo.buf_h = ALIGN(ctx->picinfo.pic_h, VCODEC_DEC_ALIGNED_64);
> + ctx->picinfo.fb_sz[0] = instance->vpu.fb_sz[0];
> + ctx->picinfo.fb_sz[1] = instance->vpu.fb_sz[1];
> +}
> +
> +static void vdec_av1_slice_get_dpb_size(struct vdec_av1_slice_instance *instance, u32 *dpb_sz)
static inline void?
> +{
> + /* refer av1 specification */
> + *dpb_sz = V4L2_AV1_TOTAL_REFS_PER_FRAME + 1;
> +}
> +
> +static void vdec_av1_slice_get_crop_info(struct vdec_av1_slice_instance *instance,
> + struct v4l2_rect *cr)
> +{
> + struct mtk_vcodec_ctx *ctx = instance->ctx;
> +
> + cr->left = 0;
> + cr->top = 0;
> + cr->width = ctx->picinfo.pic_w;
> + cr->height = ctx->picinfo.pic_h;
> +
> + mtk_vcodec_debug(instance, "l=%d, t=%d, w=%d, h=%d\n",
> + cr->left, cr->top, cr->width, cr->height);
> +}
> +
> +static int vdec_av1_slice_get_param(void *h_vdec, enum vdec_get_param_type type, void *out)
> +{
> + struct vdec_av1_slice_instance *instance = h_vdec;
> +
> + switch (type) {
> + case GET_PARAM_PIC_INFO:
> + vdec_av1_slice_get_pic_info(instance);
> + break;
> + case GET_PARAM_DPB_SIZE:
> + vdec_av1_slice_get_dpb_size(instance, out);
> + break;
> + case GET_PARAM_CROP_INFO:
> + vdec_av1_slice_get_crop_info(instance, out);
> + break;
> + default:
> + mtk_vcodec_err(instance, "invalid get parameter type=%d\n", type);
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> +static int vdec_av1_slice_lat_decode(void *h_vdec, struct mtk_vcodec_mem *bs,
> + struct vdec_fb *fb, bool *res_chg)
> +{
> + struct vdec_av1_slice_instance *instance = h_vdec;
> + struct vdec_lat_buf *lat_buf;
> + struct vdec_av1_slice_pfc *pfc;
> + struct vdec_av1_slice_vsi *vsi;
> + struct mtk_vcodec_ctx *ctx;
> + int ret;
> +
> + if (!instance || !instance->ctx)
> + return -EINVAL;
> +
> + ctx = instance->ctx;
> + /* init msgQ for the first time */
> + if (vdec_msg_queue_init(&ctx->msg_queue, ctx,
> + vdec_av1_slice_core_decode, sizeof(*pfc))) {
> + mtk_vcodec_err(instance, "failed to init AV1 msg queue\n");
> + return -ENOMEM;
> + }
> +
> + /* bs NULL means flush decoder */
> + if (!bs)
> + return vdec_av1_slice_flush(h_vdec, bs, fb, res_chg);
> +
> + lat_buf = vdec_msg_queue_dqbuf(&ctx->msg_queue.lat_ctx);
> + if (!lat_buf) {
> + mtk_vcodec_err(instance, "failed to get AV1 lat buf\n");
there exists vdec_msg_queue_deinit(). Should it be called in this (and
subsequent) error recovery path(s)?
> + return -EBUSY;
> + }
> + pfc = (struct vdec_av1_slice_pfc *)lat_buf->private_data;
> + if (!pfc) {
> + ret = -EINVAL;
> + goto err_free_fb_out;
> + }
> + vsi = &pfc->vsi;
> +
> + ret = vdec_av1_slice_setup_lat(instance, bs, lat_buf, pfc);
> + if (ret) {
> + mtk_vcodec_err(instance, "failed to setup AV1 lat ret %d\n", ret);
> + goto err_free_fb_out;
> + }
> +
> + vdec_av1_slice_vsi_to_remote(vsi, instance->vsi);
> + ret = vpu_dec_start(&instance->vpu, NULL, 0);
> + if (ret) {
> + mtk_vcodec_err(instance, "failed to dec AV1 ret %d\n", ret);
> + goto err_free_fb_out;
> + }
> + if (instance->inneracing_mode)
> + vdec_msg_queue_qbuf(&ctx->dev->msg_queue_core_ctx, lat_buf);
> +
> + if (instance->irq) {
> + ret = mtk_vcodec_wait_for_done_ctx(ctx, MTK_INST_IRQ_RECEIVED,
> + WAIT_INTR_TIMEOUT_MS,
> + MTK_VDEC_LAT0);
> + /* update remote vsi if decode timeout */
> + if (ret) {
> + mtk_vcodec_err(instance, "AV1 Frame %d decode timeout %d\n", pfc->seq, ret);
> + WRITE_ONCE(instance->vsi->state.timeout, 1);
> + }
> + vpu_dec_end(&instance->vpu);
> + }
> +
> + vdec_av1_slice_vsi_from_remote(vsi, instance->vsi);
> + ret = vdec_av1_slice_update_lat(instance, lat_buf, pfc);
> +
> + /* LAT trans full, re-decode */
> + if (ret == -EAGAIN) {
> + mtk_vcodec_err(instance, "AV1 Frame %d trans full\n", pfc->seq);
> + if (!instance->inneracing_mode)
> + vdec_msg_queue_qbuf(&ctx->msg_queue.lat_ctx, lat_buf);
> + return 0;
> + }
> +
> + /* LAT trans full, no more UBE or decode timeout */
> + if (ret == -ENOMEM || vsi->state.timeout) {
> + mtk_vcodec_err(instance, "AV1 Frame %d insufficient buffer or timeout\n", pfc->seq);
> + if (!instance->inneracing_mode)
> + vdec_msg_queue_qbuf(&ctx->msg_queue.lat_ctx, lat_buf);
> + return -EBUSY;
> + }
> + vsi->trans.dma_addr_end += ctx->msg_queue.wdma_addr.dma_addr;
> + mtk_vcodec_debug(instance, "lat dma 1 0x%llx 0x%llx\n",
> + pfc->vsi.trans.dma_addr, pfc->vsi.trans.dma_addr_end);
> +
> + vdec_msg_queue_update_ube_wptr(&ctx->msg_queue, vsi->trans.dma_addr_end);
> +
> + if (!instance->inneracing_mode)
> + vdec_msg_queue_qbuf(&ctx->dev->msg_queue_core_ctx, lat_buf);
> + memcpy(&instance->slots, &vsi->slots, sizeof(instance->slots));
> +
> + return 0;
> +
> +err_free_fb_out:
> + vdec_msg_queue_qbuf(&ctx->msg_queue.lat_ctx, lat_buf);
> + mtk_vcodec_err(instance, "slice dec number: %d err: %d", pfc->seq, ret);
> + return ret;
> +}
> +
> +static int vdec_av1_slice_core_decode(struct vdec_lat_buf *lat_buf)
> +{
> + struct vdec_av1_slice_instance *instance;
> + struct vdec_av1_slice_pfc *pfc;
> + struct mtk_vcodec_ctx *ctx = NULL;
> + struct vdec_fb *fb = NULL;
> + int ret = -EINVAL;
> +
> + if (!lat_buf)
> + return -EINVAL;
> +
> + pfc = lat_buf->private_data;
> + ctx = lat_buf->ctx;
> + if (!pfc || !ctx)
> + return -EINVAL;
> +
> + instance = ctx->drv_handle;
> + if (!instance)
> + goto err;
> +
> + fb = ctx->dev->vdec_pdata->get_cap_buffer(ctx);
> + if (!fb) {
> + ret = -EBUSY;
> + goto err;
> + }
> +
> + ret = vdec_av1_slice_setup_core(instance, fb, lat_buf, pfc);
> + if (ret) {
> + mtk_vcodec_err(instance, "vdec_av1_slice_setup_core\n");
> + goto err;
> + }
> + vdec_av1_slice_vsi_to_remote(&pfc->vsi, instance->core_vsi);
> + ret = vpu_dec_core(&instance->vpu);
> + if (ret) {
> + mtk_vcodec_err(instance, "vpu_dec_core\n");
> + goto err;
> + }
> +
> + if (instance->irq) {
> + ret = mtk_vcodec_wait_for_done_ctx(ctx, MTK_INST_IRQ_RECEIVED,
> + WAIT_INTR_TIMEOUT_MS,
> + MTK_VDEC_CORE);
> + /* update remote vsi if decode timeout */
> + if (ret) {
> + mtk_vcodec_err(instance, "AV1 frame %d core timeout\n", pfc->seq);
> + WRITE_ONCE(instance->vsi->state.timeout, 1);
> + }
> + vpu_dec_core_end(&instance->vpu);
> + }
> +
> + ret = vdec_av1_slice_update_core(instance, lat_buf, pfc);
> + if (ret) {
> + mtk_vcodec_err(instance, "vdec_av1_slice_update_core\n");
> + goto err;
> + }
> +
> + mtk_vcodec_debug(instance, "core dma_addr_end 0x%llx\n",
> + instance->core_vsi->trans.dma_addr_end);
> + vdec_msg_queue_update_ube_rptr(&ctx->msg_queue, instance->core_vsi->trans.dma_addr_end);
> +
> + ctx->dev->vdec_pdata->cap_to_disp(ctx, 0, lat_buf->src_buf_req);
> +
> + return 0;
> +
> +err:
> + /* always update read pointer */
> + vdec_msg_queue_update_ube_rptr(&ctx->msg_queue, pfc->vsi.trans.dma_addr_end);
> +
> + if (fb)
> + ctx->dev->vdec_pdata->cap_to_disp(ctx, 1, lat_buf->src_buf_req);
> +
> + return ret;
> +}
> +
> +const struct vdec_common_if vdec_av1_slice_lat_if = {
> + .init = vdec_av1_slice_init,
> + .decode = vdec_av1_slice_lat_decode,
> + .get_param = vdec_av1_slice_get_param,
> + .deinit = vdec_av1_slice_deinit,
> +};
> diff --git a/drivers/media/platform/mediatek/vcodec/vdec_drv_if.c b/drivers/media/platform/mediatek/vcodec/vdec_drv_if.c
> index f3807f03d8806..4dda59a6c8141 100644
> --- a/drivers/media/platform/mediatek/vcodec/vdec_drv_if.c
> +++ b/drivers/media/platform/mediatek/vcodec/vdec_drv_if.c
> @@ -49,6 +49,10 @@ int vdec_if_init(struct mtk_vcodec_ctx *ctx, unsigned int fourcc)
> ctx->dec_if = &vdec_vp9_slice_lat_if;
> ctx->hw_id = IS_VDEC_LAT_ARCH(hw_arch) ? MTK_VDEC_LAT0 : MTK_VDEC_CORE;
> break;
> + case V4L2_PIX_FMT_AV1_FRAME:
> + ctx->dec_if = &vdec_av1_slice_lat_if;
> + ctx->hw_id = MTK_VDEC_LAT0;
> + break;
> default:
> return -EINVAL;
> }
> diff --git a/drivers/media/platform/mediatek/vcodec/vdec_drv_if.h b/drivers/media/platform/mediatek/vcodec/vdec_drv_if.h
> index 076306ff2dd49..dc6c8ecd9843a 100644
> --- a/drivers/media/platform/mediatek/vcodec/vdec_drv_if.h
> +++ b/drivers/media/platform/mediatek/vcodec/vdec_drv_if.h
> @@ -61,6 +61,7 @@ extern const struct vdec_common_if vdec_vp8_if;
> extern const struct vdec_common_if vdec_vp8_slice_if;
> extern const struct vdec_common_if vdec_vp9_if;
> extern const struct vdec_common_if vdec_vp9_slice_lat_if;
> +extern const struct vdec_common_if vdec_av1_slice_lat_if;
>
> /**
> * vdec_if_init() - initialize decode driver
> diff --git a/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c b/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c
> index ae500980ad45c..05b54b0e3f2d2 100644
> --- a/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c
> +++ b/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.c
> @@ -20,6 +20,9 @@
> /* the size used to store avc error information */
> #define VDEC_ERR_MAP_SZ_AVC (17 * SZ_1K)
>
> +#define VDEC_RD_MV_BUFFER_SZ (((SZ_4K * 2304 >> 4) + SZ_1K) << 1)
> +#define VDEC_LAT_TILE_SZ (64 * SZ_4K)
> +
> /* core will read the trans buffer which decoded by lat to decode again.
> * The trans buffer size of FHD and 4K bitstreams are different.
> */
> @@ -194,6 +197,14 @@ void vdec_msg_queue_deinit(struct vdec_msg_queue *msg_queue,
> if (mem->va)
> mtk_vcodec_mem_free(ctx, mem);
>
> + mem = &lat_buf->rd_mv_addr;
> + if (mem->va)
> + mtk_vcodec_mem_free(ctx, mem);
> +
> + mem = &lat_buf->tile_addr;
> + if (mem->va)
> + mtk_vcodec_mem_free(ctx, mem);
> +
> kfree(lat_buf->private_data);
> }
> }
> @@ -270,6 +281,22 @@ int vdec_msg_queue_init(struct vdec_msg_queue *msg_queue,
> goto mem_alloc_err;
> }
>
> + if (ctx->current_codec == V4L2_PIX_FMT_AV1_FRAME) {
> + lat_buf->rd_mv_addr.size = VDEC_RD_MV_BUFFER_SZ;
> + err = mtk_vcodec_mem_alloc(ctx, &lat_buf->rd_mv_addr);
> + if (err) {
> + mtk_v4l2_err("failed to allocate rd_mv_addr buf[%d]", i);
> + return -ENOMEM;
> + }
> +
> + lat_buf->tile_addr.size = VDEC_LAT_TILE_SZ;
> + err = mtk_vcodec_mem_alloc(ctx, &lat_buf->tile_addr);
> + if (err) {
> + mtk_v4l2_err("failed to allocate tile_addr buf[%d]", i);
> + return -ENOMEM;
> + }
> + }
> +
> lat_buf->private_data = kzalloc(private_size, GFP_KERNEL);
> if (!lat_buf->private_data) {
> err = -ENOMEM;
> diff --git a/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.h b/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.h
> index c43d427f5f544..525170e411ee0 100644
> --- a/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.h
> +++ b/drivers/media/platform/mediatek/vcodec/vdec_msg_queue.h
> @@ -42,6 +42,8 @@ struct vdec_msg_queue_ctx {
> * struct vdec_lat_buf - lat buffer message used to store lat info for core decode
> * @wdma_err_addr: wdma error address used for lat hardware
> * @slice_bc_addr: slice bc address used for lat hardware
> + * @rd_mv_addr: mv addr for av1 lat hardware output, core hardware input
> + * @tile_addr: tile buffer for av1 core input
> * @ts_info: need to set timestamp from output to capture
> * @src_buf_req: output buffer media request object
> *
> @@ -54,6 +56,8 @@ struct vdec_msg_queue_ctx {
> struct vdec_lat_buf {
> struct mtk_vcodec_mem wdma_err_addr;
> struct mtk_vcodec_mem slice_bc_addr;
> + struct mtk_vcodec_mem rd_mv_addr;
> + struct mtk_vcodec_mem tile_addr;
> struct vb2_v4l2_buffer ts_info;
> struct media_request *src_buf_req;
>
Powered by blists - more mailing lists