| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 18 Nov 2022 18:41:41 +0100
From: Emil Renner Berthing <emil.renner.berthing@...onical.com>
To: Hal Feng <hal.feng@...rfivetech.com>
Cc: linux-riscv@...ts.infradead.org, devicetree@...r.kernel.org,
Conor Dooley <conor@...nel.org>,
Palmer Dabbelt <palmer@...belt.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Albert Ou <aou@...s.berkeley.edu>,
Ben Dooks <ben.dooks@...ive.com>,
Thomas Gleixner <tglx@...utronix.de>,
Marc Zyngier <maz@...nel.org>, Stephen Boyd <sboyd@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Linus Walleij <linus.walleij@...aro.org>,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 6/8] riscv: dts: starfive: Add initial StarFive JH7110
device tree
On Fri, 18 Nov 2022 at 02:17, Hal Feng <hal.feng@...rfivetech.com> wrote:
>
> From: Emil Renner Berthing <kernel@...il.dk>
>
> Add initial device tree for the JH7110 RISC-V SoC by StarFive
> Technology Ltd.
>
> Signed-off-by: Emil Renner Berthing <kernel@...il.dk>
> Co-developed-by: Jianlong Huang <jianlong.huang@...rfivetech.com>
> Signed-off-by: Jianlong Huang <jianlong.huang@...rfivetech.com>
> Co-developed-by: Hal Feng <hal.feng@...rfivetech.com>
> Signed-off-by: Hal Feng <hal.feng@...rfivetech.com>
> ---
> arch/riscv/boot/dts/starfive/jh7110.dtsi | 437 +++++++++++++++++++++++
> 1 file changed, 437 insertions(+)
> create mode 100644 arch/riscv/boot/dts/starfive/jh7110.dtsi
>
> diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> new file mode 100644
> index 000000000000..c22e8f1d2640
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
> @@ -0,0 +1,437 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2022 StarFive Technology Co., Ltd.
> + * Copyright (C) 2022 Emil Renner Berthing <kernel@...il.dk>
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/clock/starfive-jh7110.h>
> +#include <dt-bindings/reset/starfive-jh7110.h>
> +
> +/ {
> + compatible = "starfive,jh7110";
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + S76_0: cpu@0 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <0>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <8192>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <16384>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imac";
> + tlb-split;
> + status = "disabled";
> +
> + cpu0_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_1: cpu@1 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <1>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu1_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_2: cpu@2 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <2>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu2_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_3: cpu@3 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <3>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu3_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + U74_4: cpu@4 {
> + compatible = "sifive,u74-mc", "riscv";
> + reg = <4>;
> + d-cache-block-size = <64>;
> + d-cache-sets = <64>;
> + d-cache-size = <32768>;
> + d-tlb-sets = <1>;
> + d-tlb-size = <40>;
> + device_type = "cpu";
> + i-cache-block-size = <64>;
> + i-cache-sets = <64>;
> + i-cache-size = <32768>;
> + i-tlb-sets = <1>;
> + i-tlb-size = <40>;
> + mmu-type = "riscv,sv39";
> + next-level-cache = <&ccache>;
> + riscv,isa = "rv64imafdc";
> + tlb-split;
> +
> + cpu4_intc: interrupt-controller {
> + compatible = "riscv,cpu-intc";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + };
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&S76_0>;
> + };
> +
> + core1 {
> + cpu = <&U74_1>;
> + };
> +
> + core2 {
> + cpu = <&U74_2>;
> + };
> +
> + core3 {
> + cpu = <&U74_3>;
> + };
> +
> + core4 {
> + cpu = <&U74_4>;
> + };
> + };
> + };
> + };
> +
> + osc: osc {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + clk_rtc: clk_rtc {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + gmac0_rmii_refin: gmac0_rmii_refin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + gmac0_rgmii_rxin: gmac0_rgmii_rxin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + gmac1_rmii_refin: gmac1_rmii_refin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + gmac1_rgmii_rxin: gmac1_rgmii_rxin {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + i2stx_bclk_ext: i2stx_bclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + i2stx_lrck_ext: i2stx_lrck_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + i2srx_bclk_ext: i2srx_bclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + i2srx_lrck_ext: i2srx_lrck_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + tdm_ext: tdm_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + mclk_ext: mclk_ext {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + /* This value must be overridden by the board */
> + clock-frequency = <0>;
> + };
> +
> + soc {
Please sort these nodes after their address like the jh7100.dtsi.
That is sort the nodes after @<number>.
> + compatible = "simple-bus";
> + interrupt-parent = <&plic>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + clint: clint@...0000 {
> + compatible = "starfive,jh7110-clint", "sifive,clint0";
> + reg = <0x0 0x2000000 0x0 0x10000>;
> + interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
> + <&cpu1_intc 3>, <&cpu1_intc 7>,
> + <&cpu2_intc 3>, <&cpu2_intc 7>,
> + <&cpu3_intc 3>, <&cpu3_intc 7>,
> + <&cpu4_intc 3>, <&cpu4_intc 7>;
> + };
> +
> + plic: plic@...0000 {
> + compatible = "starfive,jh7110-plic", "sifive,plic-1.0.0";
> + reg = <0x0 0xc000000 0x0 0x4000000>;
> + interrupts-extended = <&cpu0_intc 11>,
> + <&cpu1_intc 11>, <&cpu1_intc 9>,
> + <&cpu2_intc 11>, <&cpu2_intc 9>,
> + <&cpu3_intc 11>, <&cpu3_intc 9>,
> + <&cpu4_intc 11>, <&cpu4_intc 9>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + #address-cells = <0>;
> + riscv,ndev = <136>;
> + };
> +
> + ccache: cache-controller@...0000 {
> + compatible = "starfive,jh7110-ccache", "cache";
> + reg = <0x0 0x2010000 0x0 0x4000>;
> + interrupts = <1>, <3>, <4>, <2>;
> + cache-block-size = <64>;
> + cache-level = <2>;
> + cache-sets = <2048>;
> + cache-size = <2097152>;
> + cache-unified;
> + };
> +
> + syscrg: clock-controller@...20000 {
> + compatible = "starfive,jh7110-syscrg";
> + reg = <0x0 0x13020000 0x0 0x10000>;
> + clocks = <&osc>, <&gmac1_rmii_refin>,
> + <&gmac1_rgmii_rxin>,
> + <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
> + <&i2srx_bclk_ext>, <&i2srx_lrck_ext>,
> + <&tdm_ext>, <&mclk_ext>;
> + clock-names = "osc", "gmac1_rmii_refin",
> + "gmac1_rgmii_rxin",
> + "i2stx_bclk_ext", "i2stx_lrck_ext",
> + "i2srx_bclk_ext", "i2srx_lrck_ext",
> + "tdm_ext", "mclk_ext";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + aoncrg: clock-controller@...00000 {
> + compatible = "starfive,jh7110-aoncrg";
> + reg = <0x0 0x17000000 0x0 0x10000>;
> + clocks = <&osc>, <&clk_rtc>,
> + <&gmac0_rmii_refin>, <&gmac0_rgmii_rxin>,
> + <&syscrg JH7110_SYSCLK_STG_AXIAHB>,
> + <&syscrg JH7110_SYSCLK_APB_BUS_FUNC>,
> + <&syscrg JH7110_SYSCLK_GMAC0_GTXCLK>;
> + clock-names = "osc", "clk_rtc", "gmac0_rmii_refin",
> + "gmac0_rgmii_rxin", "stg_axiahb",
> + "apb_bus_func", "gmac0_gtxclk";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + };
> +
> + gpio: gpio@...40000 {
> + compatible = "starfive,jh7110-sys-pinctrl";
> + reg = <0x0 0x13040000 0x0 0x10000>;
> + reg-names = "control";
> + clocks = <&syscrg JH7110_SYSCLK_IOMUX>;
> + resets = <&syscrg JH7110_SYSRST_IOMUX>;
> + interrupts = <86>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + gpioa: gpio@...20000 {
> + compatible = "starfive,jh7110-aon-pinctrl";
> + reg = <0x0 0x17020000 0x0 0x10000>;
> + reg-names = "control";
> + resets = <&aoncrg JH7110_AONRST_AON_IOMUX>;
> + interrupts = <85>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + };
> +
> + uart0: serial@...00000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART0_CORE>,
> + <&syscrg JH7110_SYSCLK_UART0_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART0_APB>;
> + interrupts = <32>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart1: serial@...10000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART1_CORE>,
> + <&syscrg JH7110_SYSCLK_UART1_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART1_APB>;
> + interrupts = <33>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart2: serial@...20000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x10020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART2_CORE>,
> + <&syscrg JH7110_SYSCLK_UART2_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART2_APB>;
> + interrupts = <34>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart3: serial@...00000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12000000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART3_CORE>,
> + <&syscrg JH7110_SYSCLK_UART3_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART3_APB>;
> + interrupts = <45>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart4: serial@...10000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12010000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART4_CORE>,
> + <&syscrg JH7110_SYSCLK_UART4_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART4_APB>;
> + interrupts = <46>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> +
> + uart5: serial@...20000 {
> + compatible = "snps,dw-apb-uart";
> + reg = <0x0 0x12020000 0x0 0x10000>;
> + clocks = <&syscrg JH7110_SYSCLK_UART5_CORE>,
> + <&syscrg JH7110_SYSCLK_UART5_APB>;
> + clock-names = "baudclk", "apb_pclk";
> + resets = <&syscrg JH7110_SYSRST_UART5_APB>;
> + interrupts = <47>;
> + reg-io-width = <4>;
> + reg-shift = <2>;
> + status = "disabled";
> + };
> + };
> +};
> --
> 2.38.1
>
Powered by blists - more mailing lists