[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20221118073017.26128-2-quic_rjendra@quicinc.com>
Date: Fri, 18 Nov 2022 13:00:17 +0530
From: Rajendra Nayak <quic_rjendra@...cinc.com>
To: <agross@...nel.org>, <andersson@...nel.org>, <robh+dt@...nel.org>,
<krzysztof.kozlowski+dt@...aro.org>, <konrad.dybcio@...aro.org>
CC: <linux-arm-msm@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <dianders@...omium.org>,
<mka@...omium.org>, Rajendra Nayak <quic_rjendra@...cinc.com>
Subject: [PATCH 2/2] arm64: dts: qcom: sc7280: Add a new herobrine Pro SKU
Some of the qualcomm qcard based herobrine devices can come with
a Pro variant of the chipset with some qcard level changes like
the smps9 from pm8350c which is ganged up with smps7 and smps8,
so we just end up removing smps9 from the herobrine pro sku dtsi.
We then use it to create a new dts for the Pro variant of the
herobrine CRD.
Signed-off-by: Rajendra Nayak <quic_rjendra@...cinc.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/sc7280-herobrine-crd-pro.dts | 35 +++++++++++++++++++
.../dts/qcom/sc7280-herobrine-pro-sku.dtsi | 8 +++++
3 files changed, 44 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts
create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index afe496a93f94..c5ac51c3a383 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -108,6 +108,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-wormdingler-rev1-boe-rt5682s.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7180-trogdor-r1-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-crd-pro.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-evoker-lte.dtb
dtb-$(CONFIG_ARCH_QCOM) += sc7280-herobrine-herobrine-r1.dtb
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts
new file mode 100644
index 000000000000..fe6b228e9e4b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-crd-pro.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 CRD 3+ Pro board device tree source
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include "sc7280-herobrine-crd.dts"
+#include "sc7280-herobrine-pro-sku.dtsi"
+
+/ {
+ model = "Qualcomm Technologies, Inc. sc7280 CRD Pro platform (rev5+)";
+ compatible = "google,hoglin-sku1536", "qcom,sc7280";
+
+ /* FIXED REGULATORS */
+
+ /*
+ * On most herobrine boards PPVAR_SYS directly provides VREG_EDP_BL.
+ * However, on CRD there's an extra regulator in the way. Since this
+ * is expected to be uncommon, we'll leave the "vreg_edp_bl" label
+ * in the baseboard herobrine.dtsi point at "ppvar_sys" and then
+ * make a "_crd" specific version here.
+ */
+ vreg_edp_bl_crd: vreg-edp-bl-crd-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_edp_bl_crd";
+
+ gpio = <&pm8350c_gpios 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ pinctrl-names = "default";
+ pinctrl-0 = <&edp_bl_reg_en>;
+
+ vin-supply = <&ppvar_sys>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi
new file mode 100644
index 000000000000..fb4bbe8aeda0
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-pro-sku.dtsi
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Google Herobrine dts fragment for PRO SKUs
+ *
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/delete-node/ &vreg_s9c_0p676;
--
2.17.1
Powered by blists - more mailing lists