lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAPDyKFo-p+dv9jiLhJB8YuKAq5jN5K=x3Pj2thiZ3jhr49hykA@mail.gmail.com>
Date:   Fri, 18 Nov 2022 10:45:13 +0100
From:   Ulf Hansson <ulf.hansson@...aro.org>
To:     Charl Liu <charl.liu@...hubtech.com>
Cc:     adrian.hunter@...el.com, linux-mmc@...r.kernel.org,
        linux-kernel@...r.kernel.org, shaper.liu@...hubtech.com,
        chevron.li@...hubtech.com, thomas.hu@...hubtech.com,
        xiaoguang.yu@...hubtech.com, shirley.her@...hubtech.com
Subject: Re: [PATCH V3 1/1] mmc: sdhci: Fix the SD tuning issue that the
 SDHCI_TRANSFER_MODE is cleared incorrectly

On Fri, 11 Nov 2022 at 13:23, Charl Liu <charl.liu@...hubtech.com> wrote:
>
> When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE
> should also be kept
>
> Signed-off-by: Charl Liu <charl.liu@...hubtech.com>

Applied for next, thanks!

Kind regards
Uffe


> ---
> change in V1:
> Keeping the SDHCI_TRANSFER_MODE when cmd->opcode == MMC_END_TUNING_BLOCK
>
> change in V2:
> add the mmc_op_tuning interface to judge if the opcode is tuning CMD
>
> change in V3:
> cancel the redundant code
> ---
>  drivers/mmc/host/sdhci.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index fef03de85b99..98ee688de50d 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1465,7 +1465,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
>                 if (host->quirks2 &
>                         SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
>                         /* must not clear SDHCI_TRANSFER_MODE when tuning */
> -                       if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
> +                       if (!mmc_op_tuning(cmd->opcode))
>                                 sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
>                 } else {
>                 /* clear Auto CMD settings for no data CMDs */
> --
> 2.32.0
>

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ