[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5f3fc637-4f8e-2699-2142-67d6fadf3ab7@linaro.org>
Date: Fri, 18 Nov 2022 14:19:32 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: Bartosz Golaszewski <brgl@...ev.pl>,
Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Jiri Slaby <jirislaby@...nel.org>,
Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
Vinod Koul <vkoul@...nel.org>, Alex Elder <elder@...nel.org>
Cc: linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-serial@...r.kernel.org,
Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH 02/15] tty: serial: qcom-geni-serial: remove unused
symbols
On 18/11/2022 13:25, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
>
> Drop all unused symbols from the driver.
>
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
> drivers/tty/serial/qcom_geni_serial.c | 15 ---------------
> 1 file changed, 15 deletions(-)
>
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index 9f2212e7b5ec..7af5df6833c7 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -42,20 +42,11 @@
> #define UART_TX_PAR_EN BIT(0)
> #define UART_CTS_MASK BIT(1)
>
> -/* SE_UART_TX_WORD_LEN */
> -#define TX_WORD_LEN_MSK GENMASK(9, 0)
> -
> /* SE_UART_TX_STOP_BIT_LEN */
> -#define TX_STOP_BIT_LEN_MSK GENMASK(23, 0)
> #define TX_STOP_BIT_LEN_1 0
> -#define TX_STOP_BIT_LEN_1_5 1
> #define TX_STOP_BIT_LEN_2 2
>
> -/* SE_UART_TX_TRANS_LEN */
> -#define TX_TRANS_LEN_MSK GENMASK(23, 0)
> -
> /* SE_UART_RX_TRANS_CFG */
> -#define UART_RX_INS_STATUS_BIT BIT(2)
> #define UART_RX_PAR_EN BIT(3)
>
> /* SE_UART_RX_WORD_LEN */
> @@ -66,12 +57,9 @@
>
> /* SE_UART_TX_PARITY_CFG/RX_PARITY_CFG */
> #define PAR_CALC_EN BIT(0)
> -#define PAR_MODE_MSK GENMASK(2, 1)
> -#define PAR_MODE_SHFT 1
> #define PAR_EVEN 0x00
> #define PAR_ODD 0x01
> #define PAR_SPACE 0x10
> -#define PAR_MARK 0x11
>
> /* SE_UART_MANUAL_RFR register fields */
> #define UART_MANUAL_RFR_EN BIT(31)
> @@ -80,11 +68,8 @@
>
> /* UART M_CMD OP codes */
> #define UART_START_TX 0x1
> -#define UART_START_BREAK 0x4
> -#define UART_STOP_BREAK 0x5
> /* UART S_CMD OP codes */
> #define UART_START_READ 0x1
> -#define UART_PARAM 0x1
>
> #define UART_OVERSAMPLING 32
> #define STALE_TIMEOUT 16
Powered by blists - more mailing lists