lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2ccecd72-0c6e-1268-0406-8f147d4b1091@linaro.org>
Date:   Fri, 18 Nov 2022 14:27:08 +0100
From:   Konrad Dybcio <konrad.dybcio@...aro.org>
To:     Bartosz Golaszewski <brgl@...ev.pl>,
        Andy Gross <agross@...nel.org>,
        Bjorn Andersson <andersson@...nel.org>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Jiri Slaby <jirislaby@...nel.org>,
        Srinivas Kandagatla <srinivas.kandagatla@...aro.org>,
        Vinod Koul <vkoul@...nel.org>, Alex Elder <elder@...nel.org>
Cc:     linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        linux-serial@...r.kernel.org,
        Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: Re: [PATCH 08/15] tty: serial: qcom-geni-serial: split out the FIFO
 tx code



On 18/11/2022 13:25, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> 
> qcom_geni_serial_handle_tx() is pretty big, let's move the code that
> handles the actual writing of data to a separate function which makes
> sense in preparation for introducing a dma variant of handle_tx().
> 
> Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>

Konrad
>   drivers/tty/serial/qcom_geni_serial.c | 60 +++++++++++++++------------
>   1 file changed, 33 insertions(+), 27 deletions(-)
> 
> diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c
> index 39041538e5d2..4b155ca0ac74 100644
> --- a/drivers/tty/serial/qcom_geni_serial.c
> +++ b/drivers/tty/serial/qcom_geni_serial.c
> @@ -701,19 +701,48 @@ static void qcom_geni_serial_start_rx(struct uart_port *uport)
>   	writel(irq_en, uport->membase + SE_GENI_M_IRQ_EN);
>   }
>   
> +static int qcom_geni_serial_send_chunk_fifo(struct uart_port *uport,
> +					    unsigned int chunk)
> +{
> +	struct qcom_geni_serial_port *port = to_dev_port(uport);
> +	struct circ_buf *xmit = &uport->state->xmit;
> +	size_t remaining = chunk;
> +	int i, tail = xmit->tail;
> +
> +	for (i = 0; i < chunk; ) {
> +		unsigned int tx_bytes;
> +		u8 buf[sizeof(u32)];
> +		int c;
> +
> +		memset(buf, 0, sizeof(buf));
> +		tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD);
> +
> +		for (c = 0; c < tx_bytes ; c++) {
> +			buf[c] = xmit->buf[tail++];
> +			tail &= UART_XMIT_SIZE - 1;
> +		}
> +
> +		iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
> +
> +		i += tx_bytes;
> +		uport->icount.tx += tx_bytes;
> +		remaining -= tx_bytes;
> +		port->tx_remaining -= tx_bytes;
> +	}
> +
> +	return tail;
> +}
> +
>   static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
>   		bool active)
>   {
>   	struct qcom_geni_serial_port *port = to_dev_port(uport);
>   	struct circ_buf *xmit = &uport->state->xmit;
>   	size_t avail;
> -	size_t remaining;
>   	size_t pending;
> -	int i;
>   	u32 status;
>   	u32 irq_en;
>   	unsigned int chunk;
> -	int tail;
>   
>   	status = readl(uport->membase + SE_GENI_TX_FIFO_STATUS);
>   
> @@ -732,7 +761,6 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
>   	avail = port->tx_fifo_depth - (status & TX_FIFO_WC);
>   	avail *= BYTES_PER_FIFO_WORD;
>   
> -	tail = xmit->tail;
>   	chunk = min(avail, pending);
>   	if (!chunk)
>   		goto out_write_wakeup;
> @@ -747,29 +775,7 @@ static void qcom_geni_serial_handle_tx(struct uart_port *uport, bool done,
>   					uport->membase + SE_GENI_M_IRQ_EN);
>   	}
>   
> -	remaining = chunk;
> -	for (i = 0; i < chunk; ) {
> -		unsigned int tx_bytes;
> -		u8 buf[sizeof(u32)];
> -		int c;
> -
> -		memset(buf, 0, sizeof(buf));
> -		tx_bytes = min_t(size_t, remaining, BYTES_PER_FIFO_WORD);
> -
> -		for (c = 0; c < tx_bytes ; c++) {
> -			buf[c] = xmit->buf[tail++];
> -			tail &= UART_XMIT_SIZE - 1;
> -		}
> -
> -		iowrite32_rep(uport->membase + SE_GENI_TX_FIFOn, buf, 1);
> -
> -		i += tx_bytes;
> -		uport->icount.tx += tx_bytes;
> -		remaining -= tx_bytes;
> -		port->tx_remaining -= tx_bytes;
> -	}
> -
> -	xmit->tail = tail;
> +	xmit->tail = qcom_geni_serial_send_chunk_fifo(uport, chunk);
>   
>   	/*
>   	 * The tx fifo watermark is level triggered and latched. Though we had

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ