[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3a50ba73-aab7-f6db-5e42-beb7e193c5bf@linaro.org>
Date: Mon, 21 Nov 2022 11:31:33 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Edmund Berenson <edmund.berenson@...ix.com>
Cc: Lukasz Zemla <Lukasz.Zemla@...dward.com>,
Lars-Peter Clausen <lars@...afoo.de>,
Michael Hennerich <Michael.Hennerich@...log.com>,
Jonathan Cameron <jic23@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-iio@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3] dt-bindings: iio: adc: ad7923: adjust documentation
On 21/11/2022 11:26, Edmund Berenson wrote:
> On Mon, Nov 21, 2022 at 10:13:57AM +0100, Krzysztof Kozlowski wrote:
>> On 20/11/2022 18:06, Edmund Berenson wrote:
>>> - Add the ad7927 compatibility string, with fallback compatibility
>>> to ad7928.
>>> - ad7923 and ad7924 are treated the same in the driver, show
>>> the relationship in the documentation.
>>>
>>> Suggested-by: Lukasz Zemla <Lukasz.Zemla@...dward.com>
>>> Signed-off-by: Edmund Berenson <edmund.berenson@...ix.com>
>>> ---
>>> .../bindings/iio/adc/adi,ad7923.yaml | 26 ++++++++++++-------
>>
>> Do not respond with new patch to some old thread. Each patchset starts a
>> new thread.
>>
> Sorry I didn't know this is the preferred way. I will send new patch
> version as new thread in the future.
>>> 1 file changed, 17 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
>>> index 07f9d1c09c7d..e553853e25d5 100644
>>> --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
>>> +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7923.yaml
>>> @@ -11,7 +11,7 @@ maintainers:
>>>
>>> description: |
>>> Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908,
>>> - AD7918, AD7928 8 Channels ADCs.
>>> + AD7918, AD7927, AD7928 8 Channels ADCs.
>>>
>>> Specifications about the part can be found at:
>>> https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf
>>> @@ -20,14 +20,22 @@ description: |
>>>
>>> properties:
>>> compatible:
>>> - enum:
>>> - - adi,ad7904
>>> - - adi,ad7914
>>> - - adi,ad7923
>>> - - adi,ad7924
>>> - - adi,ad7908
>>> - - adi,ad7918
>>> - - adi,ad7928
>>> + oneOf:
>>> + - enum:
>>> + - adi,ad7904
>>> + - adi,ad7914
>>> + - adi,ad7908
>>
>> You already started shuffling the entries, so make them ordered. What's
>> the point of changing the order from one non-sorted to another non-sorted?
>>
>>> + - adi,ad7918
>>> + - adi,ad7923
>>> + - adi,ad7924
>>
>> Then deprecate this as alone compatible.
>>
>>> + - adi,ad7927> + - adi,ad7928
>>
>> Ditto
>>
>>> + - items:
>>> + - const: adi,ad7923
>>> + - const: adi,ad7924
>>
>> I would expect lower number as fallback.
> If I remove alone compatibility of 7924 and 7927 in the documentation,
I don't understand. 7924 and 7927 are not compatible with each other -
neither in old code nor in new - so what do you want to remove?
> I will have to remove explicit compatibility match on the driver side,
> correct?
> Just want to make sure I don't misunderstand you.
My comment to which you responded was about order of items. Usually
lower number means older device and usually older device is the fallback.
Best regards,
Krzysztof
Powered by blists - more mailing lists