| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <b8dc3ef6-8940-0c8b-a5d2-673118bf3db0@linaro.org>
Date: Mon, 21 Nov 2022 12:13:07 +0100
From: Konrad Dybcio <konrad.dybcio@...aro.org>
To: "Lin, Meng-Bo" <linmengbo0689@...tonmail.com>,
linux-kernel@...r.kernel.org
Cc: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Stephan Gerhold <stephan@...hold.net>,
Nikita Travkin <nikita@...n.ru>, devicetree@...r.kernel.org,
linux-arm-msm@...r.kernel.org,
~postmarketos/upstreaming@...ts.sr.ht
Subject: Re: [PATCH v3 2/3] arm64: dts: qcom: msm8916-acer-a1-724: Add initial
device tree
On 21.11.2022 01:47, Lin, Meng-Bo wrote:
> Acer Iconia Talk S A1-724 is a tablet using the MSM8916 SoC released
> in 2014.
>
> Note: The original firmware from Acer can only boot 32-bit kernels.
> To boot arm64 kernels it is necessary to flash 64-bit TZ/HYP firmware
> with EDL, e.g. taken from the DragonBoard 410c. This works because Acer
> didn't set up (firmware) secure boot.
>
> Add a device tree for with initial support for:
>
> - GPIO keys
> - pm8916-vibrator
> - SDHCI (internal and external storage)
> - USB Device Mode
> - UART
> - WCNSS (WiFi/BT)
> - Regulators
>
> Signed-off-by: Lin, Meng-Bo <linmengbo0689@...tonmail.com>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Konrad
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../boot/dts/qcom/msm8916-acer-a1-724.dts | 217 ++++++++++++++++++
> 2 files changed, 218 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index afe496a93f94..f38a20074013 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -7,6 +7,7 @@ dtb-$(CONFIG_ARCH_QCOM) += ipq6018-cp01-c1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk01.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c1.dtb
> dtb-$(CONFIG_ARCH_QCOM) += ipq8074-hk10-c2.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8916-acer-a1-724.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-alcatel-idol347.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-asus-z00l.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8916-huawei-g7.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> new file mode 100644
> index 000000000000..67187673364c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8916-acer-a1-724.dts
> @@ -0,0 +1,217 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +
> +/dts-v1/;
> +
> +#include "msm8916-pm8916.dtsi"
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +
> +/*
> + * NOTE: The original firmware from Acer can only boot 32-bit kernels.
> + * To boot this device tree using arm64 it is necessary to flash 64-bit
> + * TZ/HYP firmware (e.g. taken from the DragonBoard 410c).
> + * See https://wiki.postmarketos.org/wiki/Acer_Iconia_Talk_S_(acer-a1-724)
> + * for suggested installation instructions.
> + */
> +
> +/ {
> + model = "Acer Iconia Talk S A1-724";
> + compatible = "acer,a1-724", "qcom,msm8916";
> + chassis-type = "tablet";
> +
> + aliases {
> + serial0 = &blsp1_uart2;
> + };
> +
> + chosen {
> + stdout-path = "serial0";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys_default>;
> +
> + label = "GPIO Buttons";
> +
> + button-volume-up {
> + label = "Volume Up";
> + gpios = <&msmgpio 107 GPIO_ACTIVE_LOW>;
> + linux,code = <KEY_VOLUMEUP>;
> + };
> + };
> +
> + usb_id: usb-id {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&msmgpio 110 GPIO_ACTIVE_HIGH>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&usb_id_default>;
> + };
> +};
> +
> +&blsp1_uart2 {
> + status = "okay";
> +};
> +
> +&pm8916_resin {
> + linux,code = <KEY_VOLUMEDOWN>;
> + status = "okay";
> +};
> +
> +&pm8916_vib {
> + status = "okay";
> +};
> +
> +&pronto {
> + status = "okay";
> +};
> +
> +&sdhc_1 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on>;
> + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off>;
> +
> + status = "okay";
> +};
> +
> +&sdhc_2 {
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
> + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
> +
> + cd-gpios = <&msmgpio 38 GPIO_ACTIVE_HIGH>;
> +
> + status = "okay";
> +};
> +
> +&usb {
> + extcon = <&usb_id>, <&usb_id>;
> + status = "okay";
> +};
> +
> +&usb_hs_phy {
> + extcon = <&usb_id>;
> +};
> +
> +&smd_rpm_regulators {
> + vdd_l1_l2_l3-supply = <&pm8916_s3>;
> + vdd_l4_l5_l6-supply = <&pm8916_s4>;
> + vdd_l7-supply = <&pm8916_s4>;
> +
> + s3 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1300000>;
> + };
> +
> + s4 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2100000>;
> + };
> +
> + l1 {
> + regulator-min-microvolt = <1225000>;
> + regulator-max-microvolt = <1225000>;
> + };
> +
> + l2 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1200000>;
> + };
> +
> + l4 {
> + regulator-min-microvolt = <2050000>;
> + regulator-max-microvolt = <2050000>;
> + };
> +
> + l5 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l6 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l7 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + };
> +
> + l8 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2900000>;
> + };
> +
> + l9 {
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l10 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2800000>;
> + };
> +
> + l11 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + regulator-allow-set-load;
> + regulator-system-load = <200000>;
> + };
> +
> + l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <2950000>;
> + };
> +
> + l13 {
> + regulator-min-microvolt = <3075000>;
> + regulator-max-microvolt = <3075000>;
> + };
> +
> + l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l15 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + };
> +
> + l16 {
> + regulator-min-microvolt = <2900000>;
> + regulator-max-microvolt = <2900000>;
> + };
> +
> + l17 {
> + regulator-min-microvolt = <2850000>;
> + regulator-max-microvolt = <2850000>;
> + };
> +
> + l18 {
> + regulator-min-microvolt = <2700000>;
> + regulator-max-microvolt = <2700000>;
> + };
> +};
> +
> +&msmgpio {
> + gpio_keys_default: gpio-keys-default-state {
> + pins = "gpio107";
> + function = "gpio";
> +
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +
> + usb_id_default: usb-id-default-state {
> + pins = "gpio110";
> + function = "gpio";
> +
> + drive-strength = <8>;
> + bias-pull-up;
> + };
> +};
Powered by blists - more mailing lists