[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <3e4e601b-e7f8-e9df-0ec5-4f4b629d9c0c@wolfvision.net>
Date: Tue, 22 Nov 2022 12:18:35 +0100
From: Michael Riesch <michael.riesch@...fvision.net>
To: Anand Moon <linux.amoon@...il.com>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Heiko Stuebner <heiko@...ech.de>
Cc: Chukun Pan <amadeus@....edu.cn>, Peter Geis <pgwipeout@...il.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [linux-next-v2 2/5] arm64: dts: rockchip: Add support of external
clock to ethernet node on Rock 3A SBC
Hi Anand,
On 11/16/22 21:01, Anand Moon wrote:
> Add support of external clock gmac1_clkin which is used as input clock
> to ethernet node.
Indeed this operating mode is defined in the schematics, thanks for the fix.
>
> Signed-off-by: Anand Moon <linux.amoon@...il.com>
Reviewed-by: Michael Riesch <michael.riesch@...fvision.net>
Tested-by: Michael Riesch <michael.riesch@...fvision.net>
Best regards,
Michael
> ---
> V2: None
> ---
> arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> index e1c75532dcee..b848282ea005 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
> @@ -32,6 +32,13 @@ hdmi_con_in: endpoint {
> };
> };
>
> + gmac1_clkin: external-gmac1-clock {
> + compatible = "fixed-clock";
> + clock-frequency = <125000000>;
> + clock-output-names = "gmac1_clkin";
> + #clock-cells = <0>;
> + };
> +
> leds {
> compatible = "gpio-leds";
>
> @@ -249,9 +256,8 @@ &cpu3 {
>
> &gmac1 {
> assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> - assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
> - assigned-clock-rates = <0>, <125000000>;
> - clock_in_out = "output";
> + assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&gmac1_clkin>;
> + clock_in_out = "input";
> phy-handle = <&rgmii_phy1>;
> phy-mode = "rgmii";
> pinctrl-names = "default";
> @@ -259,6 +265,7 @@ &gmac1 {
> &gmac1m1_tx_bus2
> &gmac1m1_rx_bus2
> &gmac1m1_rgmii_clk
> + &gmac1m1_clkinout
> &gmac1m1_rgmii_bus>;
>
> tx_delay = <0x4f>;
Powered by blists - more mailing lists