lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <648ff5d2-9a52-3a73-46b8-a903315202d9@huawei.com>
Date:   Wed, 23 Nov 2022 17:21:05 +0800
From:   xiujianfeng <xiujianfeng@...wei.com>
To:     Heiko Stuebner <heiko@...ech.de>, <mturquette@...libre.com>,
        <sboyd@...nel.org>, <mturquette@...aro.org>
CC:     <linux-clk@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>,
        <linux-rockchip@...ts.infradead.org>,
        <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH] clk: rockchip: Fix memory leak in
 rockchip_clk_register_pll()

Hi,

在 2022/11/23 17:01, Heiko Stuebner 写道:
> Hi,
> 
> Am Mittwoch, 23. November 2022, 04:22:37 CET schrieb Xiu Jianfeng:
>> If clk_register() fails, @pll->rate_table may have allocated memory by
>> kmemdup(), so it needs to be freed, otherwise will cause memory leak
>> issue, this patch fixes it.
>>
>> Fixes: 90c590254051 ("clk: rockchip: add clock type for pll clocks and pll used on rk3066")
>> Signed-off-by: Xiu Jianfeng <xiujianfeng@...wei.com>
>> ---
>>   drivers/clk/rockchip/clk-pll.c | 1 +
>>   1 file changed, 1 insertion(+)
>>
>> diff --git a/drivers/clk/rockchip/clk-pll.c b/drivers/clk/rockchip/clk-pll.c
>> index 4b9840994295..dc4ce280d125 100644
>> --- a/drivers/clk/rockchip/clk-pll.c
>> +++ b/drivers/clk/rockchip/clk-pll.c
>> @@ -1200,6 +1200,7 @@ struct clk *rockchip_clk_register_pll(struct rockchip_clk_provider *ctx,
>>   	clk_unregister(mux_clk);
>>   	mux_clk = pll_clk;
>>   err_mux:
>> +	kfree(pll->rate_table);
> 
> I think this free needs to go up to the err_pll block.
> 
> In the code it is
> - clk_register(pll_mux->hw)   -> err_mux
> - kmemdup
> - clk_register(pll->hw)	-> err_pll
> 
> so the kfree for the rate-table should probably
> be at
> 	err_pll:
> 		kfree(rate_table)

Thanks for you review, I think here should be kfree(pll->rate_table) 
instead of kfree(rate_table), because @rate_table is the intput param 
while pll->rate_table is the new allocated memory.

v2 already sent.

> 		clk_unregister(mux_clk);
> 		...
> 
> 
> Heiko
> 
>>   	kfree(pll);
>>   	return mux_clk;
>>   }
>>
> 
> 
> 
> 
> 
> .
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ