| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221123112625.2082797-2-o.rempel@pengutronix.de>
Date: Wed, 23 Nov 2022 12:26:21 +0100
From: Oleksij Rempel <o.rempel@...gutronix.de>
To: Woojung Huh <woojung.huh@...rochip.com>,
UNGLinuxDriver@...rochip.com, Andrew Lunn <andrew@...n.ch>,
Vivien Didelot <vivien.didelot@...il.com>,
Florian Fainelli <f.fainelli@...il.com>,
Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>
Cc: Oleksij Rempel <o.rempel@...gutronix.de>,
Arun Ramadoss <arun.ramadoss@...rochip.com>,
kernel@...gutronix.de, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org, Arun.Ramadoss@...rochip.com
Subject: [PATCH net-next v5 1/5] net: dsa: microchip: move max mtu to one location
There are no HW specific registers, so we can process all of them
in one location.
Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
Tested-by: Arun Ramadoss <arun.ramadoss@...rochip.com> (KSZ9893 and LAN937x)
---
drivers/net/dsa/microchip/ksz9477.c | 5 -----
drivers/net/dsa/microchip/ksz9477.h | 1 -
drivers/net/dsa/microchip/ksz9477_reg.h | 2 --
drivers/net/dsa/microchip/ksz_common.c | 22 +++++++++++++++++-----
drivers/net/dsa/microchip/ksz_common.h | 3 ++-
5 files changed, 19 insertions(+), 14 deletions(-)
diff --git a/drivers/net/dsa/microchip/ksz9477.c b/drivers/net/dsa/microchip/ksz9477.c
index 0d6b40968657..602d00671bef 100644
--- a/drivers/net/dsa/microchip/ksz9477.c
+++ b/drivers/net/dsa/microchip/ksz9477.c
@@ -60,11 +60,6 @@ int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu)
REG_SW_MTU_MASK, max_frame);
}
-int ksz9477_max_mtu(struct ksz_device *dev, int port)
-{
- return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
-}
-
static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev)
{
unsigned int val;
diff --git a/drivers/net/dsa/microchip/ksz9477.h b/drivers/net/dsa/microchip/ksz9477.h
index 00862c4cfb7f..7c5bb3032772 100644
--- a/drivers/net/dsa/microchip/ksz9477.h
+++ b/drivers/net/dsa/microchip/ksz9477.h
@@ -50,7 +50,6 @@ int ksz9477_mdb_add(struct ksz_device *dev, int port,
int ksz9477_mdb_del(struct ksz_device *dev, int port,
const struct switchdev_obj_port_mdb *mdb, struct dsa_db db);
int ksz9477_change_mtu(struct ksz_device *dev, int port, int mtu);
-int ksz9477_max_mtu(struct ksz_device *dev, int port);
void ksz9477_config_cpu_port(struct dsa_switch *ds);
int ksz9477_enable_stp_addr(struct ksz_device *dev);
int ksz9477_reset_switch(struct ksz_device *dev);
diff --git a/drivers/net/dsa/microchip/ksz9477_reg.h b/drivers/net/dsa/microchip/ksz9477_reg.h
index 53c68d286dd3..cc457fa64939 100644
--- a/drivers/net/dsa/microchip/ksz9477_reg.h
+++ b/drivers/net/dsa/microchip/ksz9477_reg.h
@@ -1615,6 +1615,4 @@
#define PTP_TRIG_UNIT_M (BIT(MAX_TRIG_UNIT) - 1)
#define PTP_TS_UNIT_M (BIT(MAX_TIMESTAMP_UNIT) - 1)
-#define KSZ9477_MAX_FRAME_SIZE 9000
-
#endif /* KSZ9477_REGS_H */
diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c
index 8c8db315317d..49a5a236d958 100644
--- a/drivers/net/dsa/microchip/ksz_common.c
+++ b/drivers/net/dsa/microchip/ksz_common.c
@@ -14,6 +14,7 @@
#include <linux/phy.h>
#include <linux/etherdevice.h>
#include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/of_mdio.h>
@@ -206,7 +207,6 @@ static const struct ksz_dev_ops ksz9477_dev_ops = {
.mdb_add = ksz9477_mdb_add,
.mdb_del = ksz9477_mdb_del,
.change_mtu = ksz9477_change_mtu,
- .max_mtu = ksz9477_max_mtu,
.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
.config_cpu_port = ksz9477_config_cpu_port,
.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -243,7 +243,6 @@ static const struct ksz_dev_ops lan937x_dev_ops = {
.mdb_add = ksz9477_mdb_add,
.mdb_del = ksz9477_mdb_del,
.change_mtu = lan937x_change_mtu,
- .max_mtu = ksz9477_max_mtu,
.phylink_mac_link_up = ksz9477_phylink_mac_link_up,
.config_cpu_port = lan937x_config_cpu_port,
.enable_stp_addr = ksz9477_enable_stp_addr,
@@ -2500,10 +2499,23 @@ static int ksz_max_mtu(struct dsa_switch *ds, int port)
{
struct ksz_device *dev = ds->priv;
- if (!dev->dev_ops->max_mtu)
- return -EOPNOTSUPP;
+ switch (dev->chip_id) {
+ case KSZ8563_CHIP_ID:
+ case KSZ9477_CHIP_ID:
+ case KSZ9563_CHIP_ID:
+ case KSZ9567_CHIP_ID:
+ case KSZ9893_CHIP_ID:
+ case KSZ9896_CHIP_ID:
+ case KSZ9897_CHIP_ID:
+ case LAN9370_CHIP_ID:
+ case LAN9371_CHIP_ID:
+ case LAN9372_CHIP_ID:
+ case LAN9373_CHIP_ID:
+ case LAN9374_CHIP_ID:
+ return KSZ9477_MAX_FRAME_SIZE - VLAN_ETH_HLEN - ETH_FCS_LEN;
+ }
- return dev->dev_ops->max_mtu(dev, port);
+ return -EOPNOTSUPP;
}
static void ksz_set_xmii(struct ksz_device *dev, int port,
diff --git a/drivers/net/dsa/microchip/ksz_common.h b/drivers/net/dsa/microchip/ksz_common.h
index c6726cbd5465..27c26ee15af4 100644
--- a/drivers/net/dsa/microchip/ksz_common.h
+++ b/drivers/net/dsa/microchip/ksz_common.h
@@ -322,7 +322,6 @@ struct ksz_dev_ops {
void (*get_caps)(struct ksz_device *dev, int port,
struct phylink_config *config);
int (*change_mtu)(struct ksz_device *dev, int port, int mtu);
- int (*max_mtu)(struct ksz_device *dev, int port);
void (*freeze_mib)(struct ksz_device *dev, int port, bool freeze);
void (*port_init_cnt)(struct ksz_device *dev, int port);
void (*phylink_mac_config)(struct ksz_device *dev, int port,
@@ -588,6 +587,8 @@ static inline int is_lan937x(struct ksz_device *dev)
#define PORT_SRC_PHY_INT 1
+#define KSZ9477_MAX_FRAME_SIZE 9000
+
/* Regmap tables generation */
#define KSZ_SPI_OP_RD 3
#define KSZ_SPI_OP_WR 2
--
2.30.2
Powered by blists - more mailing lists