[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5b22acfb5fee0b315a091a43badc01683c567c6f.camel@microchip.com>
Date: Thu, 24 Nov 2022 15:08:49 +0000
From: <Arun.Ramadoss@...rochip.com>
To: <olteanv@...il.com>, <UNGLinuxDriver@...rochip.com>,
<vivien.didelot@...il.com>, <andrew@...n.ch>,
<f.fainelli@...il.com>, <kuba@...nel.org>, <edumazet@...gle.com>,
<pabeni@...hat.com>, <o.rempel@...gutronix.de>,
<Woojung.Huh@...rochip.com>, <davem@...emloft.net>
CC: <linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>,
<kernel@...gutronix.de>
Subject: Re: [PATCH net-next v6 5/6] net: dsa: microchip: enable MTU
normalization for KSZ8795 and KSZ9477 compatible switches
On Thu, 2022-11-24 at 11:14 +0100, Oleksij Rempel wrote:
> EXTERNAL EMAIL: Do not click links or open attachments unless you
> know the content is safe
>
> KSZ8795 and KSZ9477 compatible series of switches use global max
> frame
> size configuration register. So, enable MTU normalization for this
> reason.
Acked-by: Arun Ramadoss <arun.ramadoss@...rochip.com>
>
> Signed-off-by: Oleksij Rempel <o.rempel@...gutronix.de>
> ---
> drivers/net/dsa/microchip/ksz8795.c | 2 ++
> drivers/net/dsa/microchip/ksz9477.c | 2 ++
> 2 files changed, 4 insertions(+)
>
> diff --git a/drivers/net/dsa/microchip/ksz8795.c
> b/drivers/net/dsa/microchip/ksz8795.c
> index d01bfd609130..060e41b9b6ef 100644
> --- a/drivers/net/dsa/microchip/ksz8795.c
> +++ b/drivers/net/dsa/microchip/ksz8795.c
> @@ -1357,6 +1357,8 @@ int ksz8_setup(struct dsa_switch *ds)
> struct ksz_device *dev = ds->priv;
> int i;
>
> + ds->mtu_enforcement_ingress = true;
> +
> ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_FLOW_CTRL, true);
>
> /* Enable automatic fast aging when link changed detected. */
> diff --git a/drivers/net/dsa/microchip/ksz9477.c
> b/drivers/net/dsa/microchip/ksz9477.c
> index f6e7968ab105..47b54ecf2c6f 100644
> --- a/drivers/net/dsa/microchip/ksz9477.c
> +++ b/drivers/net/dsa/microchip/ksz9477.c
> @@ -1134,6 +1134,8 @@ int ksz9477_setup(struct dsa_switch *ds)
> struct ksz_device *dev = ds->priv;
> int ret = 0;
>
> + ds->mtu_enforcement_ingress = true;
> +
> /* Required for port partitioning. */
> ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
> true);
> --
> 2.30.2
>
Powered by blists - more mailing lists