Message-Id: <20221125234656.47306-6-samuel@sholland.org>
Date:   Fri, 25 Nov 2022 17:46:49 -0600
From:   Samuel Holland <samuel@...lland.org>
To:     Chen-Yu Tsai <wens@...e.org>,
        Jernej Skrabec <jernej.skrabec@...il.com>,
        linux-sunxi@...ts.linux.dev, Palmer Dabbelt <palmer@...belt.com>,
        Conor Dooley <conor@...nel.org>,
        linux-riscv@...ts.infradead.org
Cc:     devicetree@...r.kernel.org,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Heiko Stuebner <heiko@...ech.de>,
        Jisheng Zhang <jszhang@...nel.org>,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        Andre Przywara <andre.przywara@....com>,
        Samuel Holland <samuel@...lland.org>,
        Albert Ou <aou@...s.berkeley.edu>,
        Anup Patel <apatel@...tanamicro.com>,
        Atish Patra <atishp@...osinc.com>,
        Christian Hewitt <christianshewitt@...il.com>,
        Conor Dooley <conor.dooley@...rochip.com>,
        Guo Ren <guoren@...nel.org>,
        Heinrich Schuchardt <heinrich.schuchardt@...onical.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Paul Walmsley <paul.walmsley@...ive.com>,
        Stanislav Jakubek <stano.jakubek@...il.com>
Subject: [PATCH v2 05/12] riscv: dts: allwinner: Add MangoPi MQ devicetree

The MangoPi MQ is a tiny SBC built around the Allwinner D1s. Its
onboard peripherals include two USB Type-C ports (1 device, 1 host)
and RTL8189FTV WLAN.

A MangoPi MQ-R variant of the board also exists. The MQ-R has a
different form factor, but the onboard peripherals are the same.

Most D1 and D1s boards use a similar power tree, with the 1.8V rail
powered by the SoC's internal LDOA, analog domains powered by ALDO,
and the rest of the board powered by always-on fixed regulators. To
avoid duplication, factor out the regulator information that is
common across boards.

The board also exposes GPIO Port E via a FPC connector, which can
support either a camera or an RMII Ethernet PHY. The additional
regulators supply that connector.

Signed-off-by: Samuel Holland <samuel@...lland.org>
---

Changes in v2:
 - New patch for v2

 arch/riscv/boot/dts/Makefile                  |   1 +
 arch/riscv/boot/dts/allwinner/Makefile        |   2 +
 .../allwinner/sun20i-common-regulators.dtsi   |  35 +++++
 .../dts/allwinner/sun20i-d1s-mangopi-mq.dts   | 135 ++++++++++++++++++
 4 files changed, 173 insertions(+)
 create mode 100644 arch/riscv/boot/dts/allwinner/Makefile
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
 create mode 100644 arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts

diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index ff174996cdfd..f292e31bdb2c 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+subdir-y += allwinner
 subdir-y += sifive
 subdir-y += starfive
 subdir-$(CONFIG_SOC_CANAAN_K210_DTB_BUILTIN) += canaan
diff --git a/arch/riscv/boot/dts/allwinner/Makefile b/arch/riscv/boot/dts/allwinner/Makefile
new file mode 100644
index 000000000000..2f2792594f7d
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_SUNXI) += sun20i-d1s-mangopi-mq.dtb
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi b/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
new file mode 100644
index 000000000000..de1adf2a2759
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-common-regulators.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2021-2022 Samuel Holland <samuel@...lland.org>
+
+/ {
+	reg_vcc: vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_vcc_3v3: vcc-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&reg_vcc>;
+	};
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc_3v3>;
+	vcc-pc-supply = <&reg_vcc_3v3>;
+	vcc-pd-supply = <&reg_vcc_3v3>;
+	vcc-pe-supply = <&reg_vcc_3v3>;
+	vcc-pf-supply = <&reg_vcc_3v3>;
+	vcc-pg-supply = <&reg_vcc_3v3>;
+};
+
+&reg_ldoa {
+	regulator-always-on;
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	ldo-in-supply = <&reg_vcc_3v3>;
+};
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
new file mode 100644
index 000000000000..11b150182490
--- /dev/null
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1s-mangopi-mq.dts
@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// Copyright (C) 2022 Samuel Holland <samuel@...lland.org>
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/dts-v1/;
+
+#include "sun20i-d1s.dtsi"
+#include "sun20i-common-regulators.dtsi"
+
+/ {
+	model = "MangoPi MQ";
+	compatible = "widora,mangopi-mq", "allwinner,sun20i-d1s";
+
+	aliases {
+		ethernet0 = &rtl8189ftv;
+		mmc0 = &mmc0;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_BACKLIGHT;
+			gpios = <&pio 3 22 GPIO_ACTIVE_LOW>; /* PD22 */
+		};
+	};
+
+	reg_avdd2v8: avdd2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "avdd2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_vcc_3v3>;
+	};
+
+	reg_dvdd: dvdd {
+		compatible = "regulator-fixed";
+		regulator-name = "dvdd";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		vin-supply = <&reg_vcc_3v3>;
+	};
+
+	reg_vcc_core: vcc-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&reg_vcc>;
+	};
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 12 GPIO_ACTIVE_LOW>; /* PG12 */
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
+	disable-wp;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&mmc1 {
+	bus-width = <4>;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	non-removable;
+	vmmc-supply = <&reg_vcc_3v3>;
+	vqmmc-supply = <&reg_vcc_3v3>;
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	rtl8189ftv: wifi@1 {
+		reg = <1>;
+		interrupt-parent = <&pio>;
+		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 */
+		interrupt-names = "host-wake";
+	};
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pio {
+	vcc-pe-supply = <&reg_avdd2v8>;
+};
+
+&reg_ldob {
+	regulator-name = "vcc-dram";
+	regulator-always-on;
+	ldo-in-supply = <&reg_vcc_3v3>;
+};
+
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	usb1_vbus-supply = <&reg_vcc>;
+	status = "okay";
+};
-- 
2.37.4

Powered by blists - more mailing lists