| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221125144223.477376-2-krzysztof.kozlowski@linaro.org>
Date: Fri, 25 Nov 2022 15:42:22 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
NXP Linux Team <linux-imx@....com>,
Stefan Agner <stefan@...er.ch>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH 2/3] ARM: dts: imx: align LED node names with dtschema
The node names should be generic and DT schema expects certain pattern:
imx50-kobo-aura.dtb: gpio-leds: 'on' does not match any of the regexes: '(^led-[0-9a-f]$|led)', 'pinctrl-[0-9]+'
imx6dl-yapp4-draco.dtb: led-controller@30: 'chan@0', 'chan@1', 'chan@2' do not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
arch/arm/boot/dts/imx50-kobo-aura.dts | 2 +-
arch/arm/boot/dts/imx53-cx9020.dts | 10 +++++-----
arch/arm/boot/dts/imx53-m53evk.dts | 4 ++--
arch/arm/boot/dts/imx53-m53menlo.dts | 6 +++---
arch/arm/boot/dts/imx53-tx53.dtsi | 2 +-
arch/arm/boot/dts/imx53-usbarmory.dts | 2 +-
arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi | 6 +++---
arch/arm/boot/dts/imx6dl-riotboard.dts | 4 ++--
arch/arm/boot/dts/imx6dl-yapp4-common.dtsi | 6 +++---
arch/arm/boot/dts/imx6q-gw5400-a.dts | 6 +++---
arch/arm/boot/dts/imx6q-h100.dts | 6 +++---
arch/arm/boot/dts/imx6q-kp.dtsi | 4 ++--
arch/arm/boot/dts/imx6q-marsboard.dts | 4 ++--
arch/arm/boot/dts/imx6q-tbs2910.dts | 2 +-
arch/arm/boot/dts/imx6qdl-emcon.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-gw551x.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw552x.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-gw553x.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-gw560x.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-gw5903.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-gw5907.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-gw5910.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-gw5912.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-gw5913.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi | 10 +++++-----
arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi | 6 +++---
arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-rex.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 2 +-
arch/arm/boot/dts/imx6qdl-ts7970.dtsi | 4 ++--
arch/arm/boot/dts/imx6qdl-tx6.dtsi | 2 +-
arch/arm/boot/dts/imx6sl-evk.dts | 2 +-
arch/arm/boot/dts/imx6sll-evk.dts | 2 +-
arch/arm/boot/dts/imx6sx-sabreauto.dts | 2 +-
arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 4 ++--
arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi | 2 +-
arch/arm/boot/dts/imx6ul-tx6ul.dtsi | 2 +-
44 files changed, 93 insertions(+), 93 deletions(-)
diff --git a/arch/arm/boot/dts/imx50-kobo-aura.dts b/arch/arm/boot/dts/imx50-kobo-aura.dts
index 51bf6117fb12..467db6b4ed7f 100644
--- a/arch/arm/boot/dts/imx50-kobo-aura.dts
+++ b/arch/arm/boot/dts/imx50-kobo-aura.dts
@@ -26,7 +26,7 @@ gpio-leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
- on {
+ led-on {
label = "kobo_aura:orange:on";
gpios = <&gpio6 24 GPIO_ACTIVE_LOW>;
panic-indicator;
diff --git a/arch/arm/boot/dts/imx53-cx9020.dts b/arch/arm/boot/dts/imx53-cx9020.dts
index cfb18849a92b..055d23a9aee7 100644
--- a/arch/arm/boot/dts/imx53-cx9020.dts
+++ b/arch/arm/boot/dts/imx53-cx9020.dts
@@ -86,27 +86,27 @@ tfp410_out: endpoint {
leds {
compatible = "gpio-leds";
- pwr-r {
+ led-pwr-r {
gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- pwr-g {
+ led-pwr-g {
gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- pwr-b {
+ led-pwr-b {
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
default-state = "off";
};
- sd1-b {
+ led-sd1-b {
linux,default-trigger = "mmc0";
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
};
- sd2-b {
+ led-sd2-b {
linux,default-trigger = "mmc1";
gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/imx53-m53evk.dts b/arch/arm/boot/dts/imx53-m53evk.dts
index a1a6228d1aa6..2bd2432d317f 100644
--- a/arch/arm/boot/dts/imx53-m53evk.dts
+++ b/arch/arm/boot/dts/imx53-m53evk.dts
@@ -52,13 +52,13 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&led_pin_gpio>;
- user1 {
+ led-user1 {
label = "user1";
gpios = <&gpio2 8 0>;
linux,default-trigger = "heartbeat";
};
- user2 {
+ led-user2 {
label = "user2";
gpios = <&gpio2 9 0>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx53-m53menlo.dts b/arch/arm/boot/dts/imx53-m53menlo.dts
index d5c68d1ea707..4d77b6077fc1 100644
--- a/arch/arm/boot/dts/imx53-m53menlo.dts
+++ b/arch/arm/boot/dts/imx53-m53menlo.dts
@@ -34,19 +34,19 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user1 {
+ led-user1 {
label = "TestLed601";
gpios = <&gpio6 1 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
};
- user2 {
+ led-user2 {
label = "TestLed602";
gpios = <&gpio6 2 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
- eth {
+ led-eth {
label = "EthLedYe";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
linux,default-trigger = "netdev";
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 892dd1a4bac3..a439a47fb65a 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -94,7 +94,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_stk5led>;
- user {
+ led-user {
label = "Heartbeat";
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx53-usbarmory.dts b/arch/arm/boot/dts/imx53-usbarmory.dts
index f34993a490ee..acc44010d510 100644
--- a/arch/arm/boot/dts/imx53-usbarmory.dts
+++ b/arch/arm/boot/dts/imx53-usbarmory.dts
@@ -67,7 +67,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user {
+ led-user {
label = "LED";
gpios = <&gpio4 27 GPIO_ACTIVE_LOW>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
index 337db29b0010..37697fac9dea 100644
--- a/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
+++ b/arch/arm/boot/dts/imx6dl-b1x5pv2.dtsi
@@ -211,17 +211,17 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_q7_gpio1 &pinctrl_q7_gpio3 &pinctrl_q7_gpio5>;
- alarm1 {
+ led-alarm1 {
label = "alarm:red";
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
- alarm2 {
+ led-alarm2 {
label = "alarm:yellow";
gpios = <&gpio4 27 GPIO_ACTIVE_HIGH>;
};
- alarm3 {
+ led-alarm3 {
label = "alarm:blue";
gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/imx6dl-riotboard.dts b/arch/arm/boot/dts/imx6dl-riotboard.dts
index e7be05f205d3..24c7f535f63b 100644
--- a/arch/arm/boot/dts/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/imx6dl-riotboard.dts
@@ -25,14 +25,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
index 52162e8c7274..aacbf317feea 100644
--- a/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/imx6dl-yapp4-common.dtsi
@@ -274,7 +274,7 @@ leds: led-controller@30 {
#address-cells = <1>;
#size-cells = <0>;
- chan@0 {
+ led@0 {
chan-name = "R";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
@@ -282,7 +282,7 @@ chan@0 {
color = <LED_COLOR_ID_RED>;
};
- chan@1 {
+ led@1 {
chan-name = "G";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
@@ -290,7 +290,7 @@ chan@1 {
color = <LED_COLOR_ID_GREEN>;
};
- chan@2 {
+ led@2 {
chan-name = "B";
led-cur = /bits/ 8 <0x20>;
max-cur = /bits/ 8 <0x60>;
diff --git a/arch/arm/boot/dts/imx6q-gw5400-a.dts b/arch/arm/boot/dts/imx6q-gw5400-a.dts
index e894faba571f..522a51042965 100644
--- a/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -34,20 +34,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 -> MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* 106 -> MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* 111 -> MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts
index b8feadbff967..6406ade14f57 100644
--- a/arch/arm/boot/dts/imx6q-h100.dts
+++ b/arch/arm/boot/dts/imx6q-h100.dts
@@ -76,19 +76,19 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_h100_leds>;
- led0: power {
+ led0: led-power {
label = "power";
gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- led1: stream {
+ led1: led-stream {
label = "stream";
gpios = <&gpio2 29 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- led2: rec {
+ led2: led-rec {
label = "rec";
gpios = <&gpio2 28 GPIO_ACTIVE_LOW>;
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6q-kp.dtsi b/arch/arm/boot/dts/imx6q-kp.dtsi
index 1ade0bff681d..5e0ed5560040 100644
--- a/arch/arm/boot/dts/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/imx6q-kp.dtsi
@@ -66,14 +66,14 @@ lcd_panel_in: endpoint {
leds {
compatible = "gpio-leds";
- green {
+ led-green {
label = "led1";
gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
default-state = "off";
};
- red {
+ led-red {
label = "led0";
gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "gpio";
diff --git a/arch/arm/boot/dts/imx6q-marsboard.dts b/arch/arm/boot/dts/imx6q-marsboard.dts
index cc1801002394..2c9961333b0a 100644
--- a/arch/arm/boot/dts/imx6q-marsboard.dts
+++ b/arch/arm/boot/dts/imx6q-marsboard.dts
@@ -73,14 +73,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user1 {
+ led-user1 {
label = "imx6:green:user1";
gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
default-state = "off";
linux,default-trigger = "heartbeat";
};
- user2 {
+ led-user2 {
label = "imx6:green:user2";
gpios = <&gpio3 28 GPIO_ACTIVE_LOW>;
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts
index 8daef65d5bb3..2f576e2ce73f 100644
--- a/arch/arm/boot/dts/imx6q-tbs2910.dts
+++ b/arch/arm/boot/dts/imx6q-tbs2910.dts
@@ -49,7 +49,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- blue {
+ led-blue {
label = "blue_status_led";
gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
index 7228b894a763..ee2dd75cead6 100644
--- a/arch/arm/boot/dts/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-emcon.dtsi
@@ -46,14 +46,14 @@ som_leds: leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_som_leds>;
- green {
+ led-green {
label = "som:green";
gpios = <&gpio3 0 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
default-state = "on";
};
- red {
+ led-red {
label = "som:red";
gpios = <&gpio3 1 GPIO_ACTIVE_LOW>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
index 069c27fab432..e75e1a5364b8 100644
--- a/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
@@ -71,14 +71,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
index 728810b9d677..47d9a8d08197 100644
--- a/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
@@ -80,20 +80,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
index 6c0c109046d8..fb1d29abe099 100644
--- a/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
@@ -80,20 +80,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
index a9b04f9f1c2b..4e20cb97058e 100644
--- a/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
@@ -81,20 +81,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
index 435dec6338fe..0fa4b8eeddee 100644
--- a/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw551x.dtsi
@@ -115,7 +115,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
default-state = "on";
diff --git a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
index 2e61102ae694..77ae611b817a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw552x.dtsi
@@ -72,20 +72,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
index 4662408b225a..7f16c602cc07 100644
--- a/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw553x.dtsi
@@ -113,14 +113,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 10 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 11 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
index 4bc4371e6bae..0c31a39d60be 100644
--- a/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw560x.dtsi
@@ -139,20 +139,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
index 1fdb7ba630f1..a74cde050158 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5903.dtsi
@@ -123,7 +123,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
index 612b6e068e28..9fc79af2bc9a 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi
@@ -120,20 +120,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
index fcd3bdfd6182..955a51226eda 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5907.dtsi
@@ -71,14 +71,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
index 6bb4855d13ce..218d6e667ed2 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5910.dtsi
@@ -74,20 +74,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
index 0415bcb41640..40e235e315cc 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5912.dtsi
@@ -72,20 +72,20 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
};
- led2: user3 {
+ led2: led-user3 {
label = "user3";
gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
index 696427b487f0..82f47c295b08 100644
--- a/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-gw5913.dtsi
@@ -71,14 +71,14 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- led0: user1 {
+ led0: led-user1 {
label = "user1";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */
default-state = "on";
linux,default-trigger = "heartbeat";
};
- led1: user2 {
+ led1: led-user2 {
label = "user2";
gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
index a53a5d0766a5..6d4eab1942b9 100644
--- a/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nit6xlite.dtsi
@@ -85,31 +85,31 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_leds>;
- j14-pin1 {
+ led-j14-pin1 {
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
};
- j14-pin3 {
+ led-j14-pin3 {
gpios = <&gpio1 3 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
};
- j14-pins8-9 {
+ led-j14-pins8-9 {
gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
};
- j46-pin2 {
+ led-j46-pin2 {
gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
};
- j46-pin3 {
+ led-j46-pin3 {
gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
retain-state-suspended;
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
index 57c21a01f126..81a9a302aec1 100644
--- a/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-nitrogen6_max.dtsi
@@ -181,13 +181,13 @@ i2c3mux@1 {
leds {
compatible = "gpio-leds";
- speaker-enable {
+ led-speaker-enable {
gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
retain-state-suspended;
default-state = "off";
};
- ttymxc4-rs232 {
+ led-ttymxc4-rs232 {
gpios = <&gpio6 10 GPIO_ACTIVE_HIGH>;
retain-state-suspended;
default-state = "on";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
index 120d6e997a4c..1a599c294ab8 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-mira.dtsi
@@ -25,17 +25,17 @@ gpio_leds: leds {
pinctrl-0 = <&pinctrl_gpioleds>;
status = "disabled";
- red {
+ led-red {
label = "phyboard-mira:red";
gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
};
- green {
+ led-green {
label = "phyboard-mira:green";
gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
};
- blue {
+ led-blue {
label = "phyboard-mira:blue";
gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "mmc0";
diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
index 768bc0e3a2b3..80adb2a02cc9 100644
--- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi
@@ -47,12 +47,12 @@ gpio_leds: leds {
pinctrl-0 = <&pinctrl_leds>;
compatible = "gpio-leds";
- led_green: green {
+ led_green: led-green {
label = "phyflex:green";
gpios = <&gpio1 30 0>;
};
- led_red: red {
+ led_red: led-red {
label = "phyflex:red";
gpios = <&gpio2 31 0>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-rex.dtsi b/arch/arm/boot/dts/imx6qdl-rex.dtsi
index de514eb5aa99..f804ff95a6ad 100644
--- a/arch/arm/boot/dts/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-rex.dtsi
@@ -55,7 +55,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- led0: usr {
+ led0: led-usr {
label = "usr";
gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
index eebcfe12142e..f79caa36f3d2 100644
--- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi
@@ -21,7 +21,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- user {
+ led-user {
label = "debug";
gpios = <&gpio5 15 GPIO_ACTIVE_HIGH>;
};
diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
index 09f4c2fa3ad6..53b080c97f2d 100644
--- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi
@@ -130,7 +130,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_leds>;
- red {
+ led-red {
gpios = <&gpio1 2 0>;
default-state = "on";
};
diff --git a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
index c096d25a6f5b..1e0a041e9f60 100644
--- a/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-ts7970.dtsi
@@ -73,13 +73,13 @@ blue-led {
default-state = "off";
};
- en-usb-5v {
+ en-usb-5v-led {
label = "en-usb-5v";
gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
default-state = "on";
};
- sel_dc_usb {
+ sel-dc-usb-led {
label = "sel_dc_usb";
gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>;
default-state = "off";
diff --git a/arch/arm/boot/dts/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
index f41f86a76ea9..a197bac95cba 100644
--- a/arch/arm/boot/dts/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-tx6.dtsi
@@ -92,7 +92,7 @@ power {
leds {
compatible = "gpio-leds";
- user_led: user {
+ user_led: led-user {
label = "Heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_user_led>;
diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts
index f16c830f1e91..dc5d596c18db 100644
--- a/arch/arm/boot/dts/imx6sl-evk.dts
+++ b/arch/arm/boot/dts/imx6sl-evk.dts
@@ -33,7 +33,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user {
+ led-user {
label = "debug";
gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx6sll-evk.dts b/arch/arm/boot/dts/imx6sll-evk.dts
index 32b3d82fec53..269092ac881c 100644
--- a/arch/arm/boot/dts/imx6sll-evk.dts
+++ b/arch/arm/boot/dts/imx6sll-evk.dts
@@ -37,7 +37,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user {
+ led-user {
label = "debug";
gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx6sx-sabreauto.dts b/arch/arm/boot/dts/imx6sx-sabreauto.dts
index 83ee97252ff1..b0c27b9b0244 100644
--- a/arch/arm/boot/dts/imx6sx-sabreauto.dts
+++ b/arch/arm/boot/dts/imx6sx-sabreauto.dts
@@ -20,7 +20,7 @@ leds {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
- user {
+ led-user {
label = "debug";
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index c84ea1fac5e9..725d0b5cb55f 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -15,14 +15,14 @@ chosen {
leds {
compatible = "gpio-leds";
- red {
+ led-red {
label = "udoo-neo:red:mmc";
gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
default-state = "off";
linux,default-trigger = "mmc0";
};
- orange {
+ led-orange {
label = "udoo-neo:orange:user";
gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
default-state = "keep";
diff --git a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
index 5168ed0ffec3..a3ea1b208462 100644
--- a/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
+++ b/arch/arm/boot/dts/imx6ul-phytec-phycore-som.dtsi
@@ -30,7 +30,7 @@ gpio_leds_som: leds {
pinctrl-0 = <&pinctrl_gpioleds_som>;
compatible = "gpio-leds";
- phycore-green {
+ led-phycore-green {
gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
diff --git a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
index 15ee0275feaf..70cef5e817bd 100644
--- a/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/imx6ul-tx6ul.dtsi
@@ -131,7 +131,7 @@ ds1339: rtc@68 {
leds {
compatible = "gpio-leds";
- user_led: user {
+ user_led: led-user {
label = "Heartbeat";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
--
2.34.1
Powered by blists - more mailing lists