lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221125155247.501203-4-krzysztof.kozlowski@linaro.org> Date: Fri, 25 Nov 2022 16:52:47 +0100 From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> To: Andy Gross <agross@...nel.org>, Bjorn Andersson <andersson@...nel.org>, Konrad Dybcio <konrad.dybcio@...aro.org>, Rob Herring <robh+dt@...nel.org>, Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>, linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, linux-kernel@...r.kernel.org Cc: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>, Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> Subject: [PATCH v4 3/3] arm64: dts: qcom: sm8450-hdk: add sound support From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org> Add sound support to SM8450 HDK board. Tested setup so far is only two speakers (working) and head-phones (only one channel working). Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org> Co-developed-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> Reviewed-by: Konrad Dybcio <konrad.dybcio@...aro.org> --- Changes since v2: 1. Use ACTIVE_LOW for qcom,wcd9380-codec reset-gpios. https://lore.kernel.org/all/20221116053817.2929810-11-dmitry.torokhov@gmail.com/ Changes since v1: 1. Sort. 2. Correct include - do not use deprecated one and drop q6asm.h (not used). --- arch/arm64/boot/dts/qcom/sm8450-hdk.dts | 160 ++++++++++++++++++++++++ 1 file changed, 160 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts index 4d75f9db08c2..1e1393e732ca 100644 --- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts +++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts @@ -6,6 +6,7 @@ /dts-v1/; #include <dt-bindings/regulator/qcom,rpmh-regulator.h> +#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h> #include "sm8450.dtsi" / { @@ -406,6 +407,147 @@ &sdhc_2 { status = "okay"; }; +&soc { + wcd938x: codec { + compatible = "qcom,wcd9380-codec"; + + qcom,micbias1-microvolt = <1800000>; + qcom,micbias2-microvolt = <1800000>; + qcom,micbias3-microvolt = <1800000>; + qcom,micbias4-microvolt = <1800000>; + qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>; + qcom,mbhc-headset-vthreshold-microvolt = <1700000>; + qcom,mbhc-headphone-vthreshold-microvolt = <50000>; + qcom,rx-device = <&wcd_rx>; + qcom,tx-device = <&wcd_tx>; + + reset-gpios = <&tlmm 43 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <1>; + + vdd-buck-supply = <&vreg_s10b_1p8>; + vdd-rxtx-supply = <&vreg_s10b_1p8>; + vdd-io-supply = <&vreg_s10b_1p8>; + vdd-mic-bias-supply = <&vreg_bob>; + }; +}; + +&sound { + compatible = "qcom,sm8450-sndcard"; + model = "SM8450-HDK"; + audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT", + "SpkrRight IN", "WSA_SPK2 OUT", + "IN1_HPHL", "HPHL_OUT", + "IN2_HPHR", "HPHR_OUT", + "AMIC1", "MIC BIAS1", + "AMIC2", "MIC BIAS2", + "AMIC3", "MIC BIAS3", + "AMIC4", "MIC BIAS3", + "AMIC5", "MIC BIAS4"; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wcd-playback-dai-link { + link-name = "WCD Playback"; + cpu { + sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&wcd938x 0>, <&swr1 0>, <&rxmacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + wsa-dai-link { + link-name = "WSA Playback"; + cpu { + sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>; + }; + + codec { + sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&wsamacro 0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; + + va-dai-link { + link-name = "VA Capture"; + cpu { + sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>; + }; + + platform { + sound-dai = <&q6apm>; + }; + }; +}; + +&swr0 { + right_spkr: speaker@0,1{ + compatible = "sdw10217020200"; + reg = <0 1>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_1_sd_n_active>; + powerdown-gpios = <&tlmm 1 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrRight"; + #thermal-sensor-cells = <0>; + vdd-supply = <&vreg_s10b_1p8>; + }; + + left_spkr: speaker@0,2{ + compatible = "sdw10217020200"; + reg = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&spkr_2_sd_n_active>; + powerdown-gpios = <&tlmm 89 GPIO_ACTIVE_LOW>; + #sound-dai-cells = <0>; + sound-name-prefix = "SpkrLeft"; + #thermal-sensor-cells = <0>; + vdd-supply = <&vreg_s10b_1p8>; + }; +}; + +&swr1 { + status = "okay"; + + wcd_rx: codec@0,4 { + compatible = "sdw20217010d00"; + reg = <0 4>; + qcom,rx-port-mapping = <1 2 3 4 5>; + }; +}; + +&swr2 { + status = "okay"; + + wcd_tx: codec@0,3 { + compatible = "sdw20217010d00"; + reg = <0 3>; + /* ports: adc1_2, adc3_4, dmic0_3_mbhc, dmic4_7 */ + qcom,tx-port-mapping = <1 1 2 3>; + }; +}; + &tlmm { gpio-reserved-ranges = <28 4>, <36 4>; @@ -461,3 +603,21 @@ &usb_1_qmpphy { vdda-phy-supply = <&vreg_l6b_1p2>; vdda-pll-supply = <&vreg_l1b_0p91>; }; + +&tlmm { + spkr_1_sd_n_active: spkr-1-sd-n-active-state { + pins = "gpio1"; + function = "gpio"; + drive-strength = <4>; + bias-disable; + output-low; + }; + + spkr_2_sd_n_active: spkr-2-sd-n-active-state { + pins = "gpio89"; + function = "gpio"; + drive-strength = <4>; + bias-disable; + output-low; + }; +}; -- 2.34.1
Powered by blists - more mailing lists