lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-ID: <Y4DqDJV1JPJtzKCk@valkosipuli.retiisi.eu> Date: Fri, 25 Nov 2022 18:15:08 +0200 From: Sakari Ailus <sakari.ailus@....fi> To: shravan kumar <shravan.chippa@...rochip.com> Cc: paul.j.murphy@...el.com, daniele.alessandrelli@...el.com, mchehab@...nel.org, linux-media@...r.kernel.org, linux-kernel@...r.kernel.org, Conor Dooley <conor.dooley@...rochip.com>, Prakash Battu <Prakash.Battu@...rochip.com> Subject: Re: [PATCH v5 5/6] media: i2c: imx334: support lower bandwidth mode Hi Shravan, On Fri, Nov 25, 2022 at 10:38:06AM +0530, shravan kumar wrote: > From: Shravan Chippa <shravan.chippa@...rochip.com> > > Some platforms may not be capable of supporting the bandwidth > required for 12 bit or 3840x2160@60 resolutions. > > Add support for dynamically selecting 10 bit and 1920x1080@30 > resolutions while leaving the existing configuration as default > > CC: Conor Dooley <conor.dooley@...rochip.com> > Signed-off-by: Prakash Battu <Prakash.Battu@...rochip.com> > Signed-off-by: Shravan Chippa <shravan.chippa@...rochip.com> > --- > drivers/media/i2c/imx334.c | 302 +++++++++++++++++++++++++++++++++---- > 1 file changed, 276 insertions(+), 26 deletions(-) > > diff --git a/drivers/media/i2c/imx334.c b/drivers/media/i2c/imx334.c > index cd41df56ab7d..0e5575604d87 100644 > --- a/drivers/media/i2c/imx334.c > +++ b/drivers/media/i2c/imx334.c > @@ -79,7 +79,6 @@ struct imx334_reg_list { > * struct imx334_mode - imx334 sensor mode structure > * @width: Frame width > * @height: Frame height > - * @code: Format code > * @hblank: Horizontal blanking in lines > * @vblank: Vertical blanking in lines > * @vblank_min: Minimal vertical blanking in lines > @@ -91,7 +90,6 @@ struct imx334_reg_list { > struct imx334_mode { > u32 width; > u32 height; > - u32 code; > u32 hblank; > u32 vblank; > u32 vblank_min; > @@ -119,6 +117,7 @@ struct imx334_mode { > * @vblank: Vertical blanking in lines > * @cur_mode: Pointer to current selected sensor mode > * @mutex: Mutex for serializing sensor controls > + * @cur_code: current selected format code > * @streaming: Flag indicating streaming state > */ > struct imx334 { > @@ -140,6 +139,7 @@ struct imx334 { > u32 vblank; > const struct imx334_mode *cur_mode; > struct mutex mutex; > + u32 cur_code; > bool streaming; > }; > > @@ -147,6 +147,169 @@ static const s64 link_freq[] = { > IMX334_LINK_FREQ, > }; > > +/* Sensor mode registers */ > +static const struct imx334_reg mode_1920x1080_regs[] = { > + {0x3000, 0x01}, > + {0x3018, 0x04}, > + {0x3030, 0xCA}, > + {0x3031, 0x08}, > + {0x3032, 0x00}, > + {0x3034, 0x4C}, > + {0x3035, 0x04}, > + {0x302C, 0xF0}, > + {0x302D, 0x03}, > + {0x302E, 0x80}, > + {0x302F, 0x07}, > + {0x3074, 0xCC}, > + {0x3075, 0x02}, > + {0x308E, 0xCD}, > + {0x308F, 0x02}, > + {0x3076, 0x38}, > + {0x3077, 0x04}, > + {0x3090, 0x38}, > + {0x3091, 0x04}, > + {0x3308, 0x38}, > + {0x3309, 0x04}, > + {0x30C6, 0x00}, > + {0x30C7, 0x00}, > + {0x30CE, 0x00}, > + {0x30CF, 0x00}, > + {0x30D8, 0x18}, > + {0x30D9, 0x0A}, > + {0x304C, 0x00}, > + {0x304E, 0x00}, > + {0x304F, 0x00}, > + {0x3050, 0x00}, > + {0x30B6, 0x00}, > + {0x30B7, 0x00}, > + {0x3116, 0x08}, > + {0x3117, 0x00}, > + {0x31A0, 0x20}, > + {0x31A1, 0x0F}, > + {0x300C, 0x3B}, > + {0x300D, 0x29}, > + {0x314C, 0x29}, > + {0x314D, 0x01}, > + {0x315A, 0x06}, > + {0x3168, 0xA0}, > + {0x316A, 0x7E}, > + {0x319E, 0x02}, > + {0x3199, 0x00}, > + {0x319D, 0x00}, > + {0x31DD, 0x03}, > + {0x3300, 0x00}, > + {0x341C, 0xFF}, > + {0x341D, 0x01}, > + {0x3A01, 0x03}, > + {0x3A18, 0x7F}, > + {0x3A19, 0x00}, > + {0x3A1A, 0x37}, > + {0x3A1B, 0x00}, > + {0x3A1C, 0x37}, > + {0x3A1D, 0x00}, > + {0x3A1E, 0xF7}, > + {0x3A1F, 0x00}, > + {0x3A20, 0x3F}, > + {0x3A21, 0x00}, > + {0x3A20, 0x6F}, > + {0x3A21, 0x00}, > + {0x3A20, 0x3F}, > + {0x3A21, 0x00}, > + {0x3A20, 0x5F}, > + {0x3A21, 0x00}, > + {0x3A20, 0x2F}, > + {0x3A21, 0x00}, > + {0x3078, 0x02}, > + {0x3079, 0x00}, > + {0x307A, 0x00}, > + {0x307B, 0x00}, > + {0x3080, 0x02}, > + {0x3081, 0x00}, > + {0x3082, 0x00}, > + {0x3083, 0x00}, > + {0x3088, 0x02}, > + {0x3094, 0x00}, > + {0x3095, 0x00}, > + {0x3096, 0x00}, > + {0x309B, 0x02}, > + {0x309C, 0x00}, > + {0x309D, 0x00}, > + {0x309E, 0x00}, > + {0x30A4, 0x00}, > + {0x30A5, 0x00}, > + {0x3288, 0x21}, > + {0x328A, 0x02}, > + {0x3414, 0x05}, > + {0x3416, 0x18}, > + {0x35AC, 0x0E}, > + {0x3648, 0x01}, > + {0x364A, 0x04}, > + {0x364C, 0x04}, > + {0x3678, 0x01}, > + {0x367C, 0x31}, > + {0x367E, 0x31}, > + {0x3708, 0x02}, > + {0x3714, 0x01}, > + {0x3715, 0x02}, > + {0x3716, 0x02}, > + {0x3717, 0x02}, > + {0x371C, 0x3D}, > + {0x371D, 0x3F}, > + {0x372C, 0x00}, > + {0x372D, 0x00}, > + {0x372E, 0x46}, > + {0x372F, 0x00}, > + {0x3730, 0x89}, > + {0x3731, 0x00}, > + {0x3732, 0x08}, > + {0x3733, 0x01}, > + {0x3734, 0xFE}, > + {0x3735, 0x05}, > + {0x375D, 0x00}, > + {0x375E, 0x00}, > + {0x375F, 0x61}, > + {0x3760, 0x06}, > + {0x3768, 0x1B}, > + {0x3769, 0x1B}, > + {0x376A, 0x1A}, > + {0x376B, 0x19}, > + {0x376C, 0x18}, > + {0x376D, 0x14}, > + {0x376E, 0x0F}, > + {0x3776, 0x00}, > + {0x3777, 0x00}, > + {0x3778, 0x46}, > + {0x3779, 0x00}, > + {0x377A, 0x08}, > + {0x377B, 0x01}, > + {0x377C, 0x45}, > + {0x377D, 0x01}, > + {0x377E, 0x23}, > + {0x377F, 0x02}, > + {0x3780, 0xD9}, > + {0x3781, 0x03}, > + {0x3782, 0xF5}, > + {0x3783, 0x06}, > + {0x3784, 0xA5}, > + {0x3788, 0x0F}, > + {0x378A, 0xD9}, > + {0x378B, 0x03}, > + {0x378C, 0xEB}, > + {0x378D, 0x05}, > + {0x378E, 0x87}, > + {0x378F, 0x06}, > + {0x3790, 0xF5}, > + {0x3792, 0x43}, > + {0x3794, 0x7A}, > + {0x3796, 0xA1}, > + {0x37B0, 0x37}, > + {0x3E04, 0x0E}, > + {0x30E8, 0x50}, > + {0x30E9, 0x00}, > + {0x3E04, 0x0E}, > + {0x3002, 0x00}, > +}; > + > /* Sensor mode registers */ > static const struct imx334_reg mode_3840x2160_regs[] = { > {0x3000, 0x01}, > @@ -263,20 +426,56 @@ static const struct imx334_reg mode_3840x2160_regs[] = { > {0x3A29, 0x00}, > }; > > +static const struct imx334_reg raw10_framefmt_regs[] = { > + {0x3050, 0x00}, > + {0x319D, 0x00}, > + {0x341C, 0xFF}, > + {0x341D, 0x01}, > +}; > + > +static const struct imx334_reg raw12_framefmt_regs[] = { > + {0x3050, 0x01}, > + {0x319D, 0x01}, > + {0x341C, 0x47}, > + {0x341D, 0x00}, > +}; > + > +/* > + * The supported BUS formats. > + */ Redundant comment. > +static const u32 imx334_mbus_codes[] = { > + MEDIA_BUS_FMT_SRGGB12_1X12, > + MEDIA_BUS_FMT_SRGGB10_1X10, > +}; > + > /* Supported sensor mode configurations */ > -static const struct imx334_mode supported_mode = { > - .width = 3840, > - .height = 2160, > - .hblank = 560, > - .vblank = 2340, > - .vblank_min = 90, > - .vblank_max = 132840, > - .pclk = 594000000, > - .link_freq_idx = 0, > - .code = MEDIA_BUS_FMT_SRGGB12_1X12, > - .reg_list = { > - .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs), > - .regs = mode_3840x2160_regs, > +static const struct imx334_mode supported_modes[] = { > + { > + .width = 3840, > + .height = 2160, > + .hblank = 560, > + .vblank = 2340, > + .vblank_min = 90, > + .vblank_max = 132840, > + .pclk = 594000000, > + .link_freq_idx = 0, > + .reg_list = { > + .num_of_regs = ARRAY_SIZE(mode_3840x2160_regs), > + .regs = mode_3840x2160_regs, > + }, > + }, { > + .width = 1920, > + .height = 1080, > + .hblank = 280, > + .vblank = 1170, > + .vblank_min = 90, > + .vblank_max = 132840, > + .pclk = 74250000, > + .link_freq_idx = 0, > + .reg_list = { > + .num_of_regs = ARRAY_SIZE(mode_1920x1080_regs), > + .regs = mode_1920x1080_regs, > + }, > }, > }; > > @@ -527,10 +726,10 @@ static int imx334_enum_mbus_code(struct v4l2_subdev *sd, > struct v4l2_subdev_state *sd_state, > struct v4l2_subdev_mbus_code_enum *code) > { > - if (code->index > 0) > + if (code->index >= ARRAY_SIZE(imx334_mbus_codes)) > return -EINVAL; > > - code->code = supported_mode.code; > + code->code = imx334_mbus_codes[code->index]; > > return 0; > } > @@ -547,15 +746,22 @@ static int imx334_enum_frame_size(struct v4l2_subdev *sd, > struct v4l2_subdev_state *sd_state, > struct v4l2_subdev_frame_size_enum *fsize) > { > - if (fsize->index > 0) > + unsigned int i; > + > + if (fsize->index >= ARRAY_SIZE(supported_modes)) > return -EINVAL; > > - if (fsize->code != supported_mode.code) > + for (i = 0; i < ARRAY_SIZE(imx334_mbus_codes); ++i) { > + if (imx334_mbus_codes[i] == fsize->code) > + break; > + } > + > + if (i == ARRAY_SIZE(imx334_mbus_codes)) You could use >= instead, as you do below. You could also refactor this a little to avoid duplicating the these lines. > return -EINVAL; > > - fsize->min_width = supported_mode.width; > + fsize->min_width = supported_modes[fsize->index].width; > fsize->max_width = fsize->min_width; > - fsize->min_height = supported_mode.height; > + fsize->min_height = supported_modes[fsize->index].height; > fsize->max_height = fsize->min_height; > > return 0; > @@ -574,7 +780,6 @@ static void imx334_fill_pad_format(struct imx334 *imx334, > { > fmt->format.width = mode->width; > fmt->format.height = mode->height; > - fmt->format.code = mode->code; > fmt->format.field = V4L2_FIELD_NONE; > fmt->format.colorspace = V4L2_COLORSPACE_RAW; > fmt->format.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; > @@ -612,6 +817,21 @@ static int imx334_get_pad_format(struct v4l2_subdev *sd, > return 0; > } > > +static int imx334_get_format_code(struct imx334 *imx334, struct v4l2_subdev_format *fmt) > +{ > + unsigned int i; > + > + for (i = 0; i < ARRAY_SIZE(imx334_mbus_codes); i++) { > + if (imx334_mbus_codes[i] == fmt->format.code) > + break; > + } > + > + if (i >= ARRAY_SIZE(imx334_mbus_codes)) > + i = 0; > + > + return imx334_mbus_codes[i]; > +} > + > /** > * imx334_set_pad_format() - Set subdevice pad format > * @sd: pointer to imx334 V4L2 sub-device structure > @@ -630,7 +850,13 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd, > > mutex_lock(&imx334->mutex); > > - mode = &supported_mode; > + fmt->format.code = imx334_get_format_code(imx334, fmt); > + > + mode = v4l2_find_nearest_size(supported_modes, > + ARRAY_SIZE(supported_modes), > + width, height, > + fmt->format.width, fmt->format.height); > + > imx334_fill_pad_format(imx334, mode, fmt); > > if (fmt->which == V4L2_SUBDEV_FORMAT_TRY) { > @@ -638,7 +864,8 @@ static int imx334_set_pad_format(struct v4l2_subdev *sd, > > framefmt = v4l2_subdev_get_try_format(sd, sd_state, fmt->pad); > *framefmt = fmt->format; > - } else { > + } else if (imx334->cur_mode != mode || imx334->cur_code != fmt->format.code) { > + imx334->cur_code = fmt->format.code; > ret = imx334_update_controls(imx334, mode); > if (!ret) > imx334->cur_mode = mode; > @@ -663,11 +890,26 @@ static int imx334_init_pad_cfg(struct v4l2_subdev *sd, > struct v4l2_subdev_format fmt = { 0 }; > > fmt.which = sd_state ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; > - imx334_fill_pad_format(imx334, &supported_mode, &fmt); > + imx334_fill_pad_format(imx334, &supported_modes[0], &fmt); > > return imx334_set_pad_format(sd, sd_state, &fmt); > } > > +static int imx334_set_framefmt(struct imx334 *imx334) > +{ > + switch (imx334->cur_code) { > + case MEDIA_BUS_FMT_SRGGB10_1X10: > + return imx334_write_regs(imx334, raw10_framefmt_regs, > + ARRAY_SIZE(raw10_framefmt_regs)); > + > + case MEDIA_BUS_FMT_SRGGB12_1X12: > + return imx334_write_regs(imx334, raw12_framefmt_regs, > + ARRAY_SIZE(raw12_framefmt_regs)); Please align just right of the opening parenthesis. The same above. > + } > + > + return -EINVAL; > +} > + > /** > * imx334_start_streaming() - Start sensor stream > * @imx334: pointer to imx334 device > @@ -688,6 +930,13 @@ static int imx334_start_streaming(struct imx334 *imx334) > return ret; > } > > + ret = imx334_set_framefmt(imx334); > + if (ret) { > + dev_err(imx334->dev, "%s failed to set frame format: %d\n", > + __func__, ret); > + return ret; > + } > + > /* Setup handler will write actual exposure and gain */ > ret = __v4l2_ctrl_handler_setup(imx334->sd.ctrl_handler); > if (ret) { > @@ -1058,7 +1307,8 @@ static int imx334_probe(struct i2c_client *client) > } > > /* Set default mode to max resolution */ > - imx334->cur_mode = &supported_mode; > + imx334->cur_mode = &supported_modes[0]; > + imx334->cur_code = imx334_mbus_codes[0]; > imx334->vblank = imx334->cur_mode->vblank; > > ret = imx334_init_controls(imx334); -- Kind regards, Sakari Ailus
Powered by blists - more mailing lists