lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
Open Source and information security mailing list archives
| ||
|
Message-Id: <20221126225624.751661-4-masahiroy@kernel.org> Date: Sun, 27 Nov 2022 07:56:23 +0900 From: Masahiro Yamada <masahiroy@...nel.org> To: linux-kbuild@...r.kernel.org Cc: linux-kernel@...r.kernel.org, Masahiro Yamada <masahiroy@...nel.org>, Nicolas Schier <nicolas@...sle.eu> Subject: [PATCH v3 4/5] kconfig: refactor Makefile to reduce process forks Refactor Makefile and use read-file macro. For Make >= 4.2, it can read out a file by using the built-in function. Signed-off-by: Masahiro Yamada <masahiroy@...nel.org> Reviewed-by: Nicolas Schier <nicolas@...sle.eu> --- (no changes since v1) scripts/kconfig/.gitignore | 4 +++- scripts/kconfig/Makefile | 43 +++++++++++++++++++----------------- scripts/kconfig/gconf-cfg.sh | 7 ++++-- scripts/kconfig/mconf-cfg.sh | 25 ++++++++++++--------- scripts/kconfig/nconf-cfg.sh | 23 ++++++++++--------- scripts/kconfig/qconf-cfg.sh | 10 ++++++--- scripts/remove-stale-files | 2 ++ 7 files changed, 67 insertions(+), 47 deletions(-) diff --git a/scripts/kconfig/.gitignore b/scripts/kconfig/.gitignore index 500e7424b3ef..c8a3f9cd52f0 100644 --- a/scripts/kconfig/.gitignore +++ b/scripts/kconfig/.gitignore @@ -1,5 +1,7 @@ # SPDX-License-Identifier: GPL-2.0-only /conf /[gmnq]conf -/[gmnq]conf-cfg +/[gmnq]conf-cflags +/[gmnq]conf-libs +/qconf-bin /qconf-moc.cc diff --git a/scripts/kconfig/Makefile b/scripts/kconfig/Makefile index b8ef0fb4bbef..da7da9775a4b 100644 --- a/scripts/kconfig/Makefile +++ b/scripts/kconfig/Makefile @@ -159,11 +159,12 @@ conf-objs := conf.o $(common-objs) hostprogs += nconf nconf-objs := nconf.o nconf.gui.o $(common-objs) -HOSTLDLIBS_nconf = $(shell . $(obj)/nconf-cfg && echo $$libs) -HOSTCFLAGS_nconf.o = $(shell . $(obj)/nconf-cfg && echo $$cflags) -HOSTCFLAGS_nconf.gui.o = $(shell . $(obj)/nconf-cfg && echo $$cflags) +HOSTLDLIBS_nconf = $(call read-file, $(obj)/nconf-libs) +HOSTCFLAGS_nconf.o = $(call read-file, $(obj)/nconf-cflags) +HOSTCFLAGS_nconf.gui.o = $(call read-file, $(obj)/nconf-cflags) -$(obj)/nconf.o $(obj)/nconf.gui.o: $(obj)/nconf-cfg +$(obj)/nconf: | $(obj)/nconf-libs +$(obj)/nconf.o $(obj)/nconf.gui.o: | $(obj)/nconf-cflags # mconf: Used for the menuconfig target based on lxdialog hostprogs += mconf @@ -171,27 +172,28 @@ lxdialog := $(addprefix lxdialog/, \ checklist.o inputbox.o menubox.o textbox.o util.o yesno.o) mconf-objs := mconf.o $(lxdialog) $(common-objs) -HOSTLDLIBS_mconf = $(shell . $(obj)/mconf-cfg && echo $$libs) +HOSTLDLIBS_mconf = $(call read-file, $(obj)/mconf-libs) $(foreach f, mconf.o $(lxdialog), \ - $(eval HOSTCFLAGS_$f = $$(shell . $(obj)/mconf-cfg && echo $$$$cflags))) + $(eval HOSTCFLAGS_$f = $$(call read-file, $(obj)/mconf-cflags))) -$(addprefix $(obj)/, mconf.o $(lxdialog)): $(obj)/mconf-cfg +$(obj)/mconf: | $(obj)/mconf-libs +$(addprefix $(obj)/, mconf.o $(lxdialog)): | $(obj)/mconf-cflags # qconf: Used for the xconfig target based on Qt hostprogs += qconf qconf-cxxobjs := qconf.o qconf-moc.o qconf-objs := images.o $(common-objs) -HOSTLDLIBS_qconf = $(shell . $(obj)/qconf-cfg && echo $$libs) -HOSTCXXFLAGS_qconf.o = $(shell . $(obj)/qconf-cfg && echo $$cflags) -HOSTCXXFLAGS_qconf-moc.o = $(shell . $(obj)/qconf-cfg && echo $$cflags) - -$(obj)/qconf.o: $(obj)/qconf-cfg +HOSTLDLIBS_qconf = $(call read-file, $(obj)/qconf-libs) +HOSTCXXFLAGS_qconf.o = -std=c++11 -fPIC $(call read-file, $(obj)/qconf-cflags) +HOSTCXXFLAGS_qconf-moc.o = -std=c++11 -fPIC $(call read-file, $(obj)/qconf-cflags) +$(obj)/qconf: | $(obj)/qconf-libs +$(obj)/qconf.o $(obj)/qconf-moc.o: | $(obj)/qconf-cflags quiet_cmd_moc = MOC $@ - cmd_moc = $(shell . $(obj)/qconf-cfg && echo $$moc) $< -o $@ + cmd_moc = $(call read-file, $(obj)/qconf-bin)/moc $< -o $@ -$(obj)/qconf-moc.cc: $(src)/qconf.h $(obj)/qconf-cfg FORCE +$(obj)/qconf-moc.cc: $(src)/qconf.h FORCE | $(obj)/qconf-bin $(call if_changed,moc) targets += qconf-moc.cc @@ -200,15 +202,16 @@ targets += qconf-moc.cc hostprogs += gconf gconf-objs := gconf.o images.o $(common-objs) -HOSTLDLIBS_gconf = $(shell . $(obj)/gconf-cfg && echo $$libs) -HOSTCFLAGS_gconf.o = $(shell . $(obj)/gconf-cfg && echo $$cflags) +HOSTLDLIBS_gconf = $(call read-file, $(obj)/gconf-libs) +HOSTCFLAGS_gconf.o = $(call read-file, $(obj)/gconf-cflags) -$(obj)/gconf.o: $(obj)/gconf-cfg +$(obj)/gconf: | $(obj)/gconf-libs +$(obj)/gconf.o: | $(obj)/gconf-cflags # check if necessary packages are available, and configure build flags -filechk_conf_cfg = $(CONFIG_SHELL) $< +cmd_conf_cfg = $< $(addprefix $(obj)/$*conf-, cflags libs bin) -$(obj)/%conf-cfg: $(src)/%conf-cfg.sh FORCE - $(call filechk,conf_cfg) +$(obj)/%conf-cflags $(obj)/%conf-libs $(obj)/%conf-bin: $(src)/%conf-cfg.sh + $(call cmd,conf_cfg) clean-files += *conf-cfg diff --git a/scripts/kconfig/gconf-cfg.sh b/scripts/kconfig/gconf-cfg.sh index cbd90c28c05f..040d8f338820 100755 --- a/scripts/kconfig/gconf-cfg.sh +++ b/scripts/kconfig/gconf-cfg.sh @@ -1,6 +1,9 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +cflags=$1 +libs=$2 + PKG="gtk+-2.0 gmodule-2.0 libglade-2.0" if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then @@ -26,5 +29,5 @@ if ! ${HOSTPKG_CONFIG} --atleast-version=2.0.0 gtk+-2.0; then exit 1 fi -echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\" -echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\" +${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags} +${HOSTPKG_CONFIG} --libs ${PKG} > ${libs} diff --git a/scripts/kconfig/mconf-cfg.sh b/scripts/kconfig/mconf-cfg.sh index 025b565e0b7c..1e61f50a5905 100755 --- a/scripts/kconfig/mconf-cfg.sh +++ b/scripts/kconfig/mconf-cfg.sh @@ -1,19 +1,22 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +cflags=$1 +libs=$2 + PKG="ncursesw" PKG2="ncurses" if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then if ${HOSTPKG_CONFIG} --exists $PKG; then - echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\" - echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\" + ${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags} + ${HOSTPKG_CONFIG} --libs ${PKG} > ${libs} exit 0 fi - if ${HOSTPKG_CONFIG} --exists $PKG2; then - echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\" - echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\" + if ${HOSTPKG_CONFIG} --exists ${PKG2}; then + ${HOSTPKG_CONFIG} --cflags ${PKG2} > ${cflags} + ${HOSTPKG_CONFIG} --libs ${PKG2} > ${libs} exit 0 fi fi @@ -22,22 +25,22 @@ fi # (Even if it is installed, some distributions such as openSUSE cannot # find ncurses by pkg-config.) if [ -f /usr/include/ncursesw/ncurses.h ]; then - echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\" - echo libs=\"-lncursesw\" + echo -D_GNU_SOURCE -I/usr/include/ncursesw > ${cflags} + echo -lncursesw > ${libs} exit 0 fi if [ -f /usr/include/ncurses/ncurses.h ]; then - echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\" - echo libs=\"-lncurses\" + echo -D_GNU_SOURCE -I/usr/include/ncurses > ${cflags} + echo -lncurses > ${libs} exit 0 fi # As a final fallback before giving up, check if $HOSTCC knows of a default # ncurses installation (e.g. from a vendor-specific sysroot). if echo '#include <ncurses.h>' | ${HOSTCC} -E - >/dev/null 2>&1; then - echo cflags=\"-D_GNU_SOURCE\" - echo libs=\"-lncurses\" + echo -D_GNU_SOURCE > ${cflags} + echo -lncurses > ${libs} exit 0 fi diff --git a/scripts/kconfig/nconf-cfg.sh b/scripts/kconfig/nconf-cfg.sh index 3a10bac2adb3..f871a2160e36 100755 --- a/scripts/kconfig/nconf-cfg.sh +++ b/scripts/kconfig/nconf-cfg.sh @@ -1,19 +1,22 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +cflags=$1 +libs=$2 + PKG="ncursesw menuw panelw" PKG2="ncurses menu panel" if [ -n "$(command -v ${HOSTPKG_CONFIG})" ]; then if ${HOSTPKG_CONFIG} --exists $PKG; then - echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG)\" - echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\" + ${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags} + ${HOSTPKG_CONFIG} --libs ${PKG} > ${libs} exit 0 fi if ${HOSTPKG_CONFIG} --exists $PKG2; then - echo cflags=\"$(${HOSTPKG_CONFIG} --cflags $PKG2)\" - echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG2)\" + ${HOSTPKG_CONFIG} --cflags ${PKG2} > ${cflags} + ${HOSTPKG_CONFIG} --libs ${PKG2} > ${libs} exit 0 fi fi @@ -22,20 +25,20 @@ fi # (Even if it is installed, some distributions such as openSUSE cannot # find ncurses by pkg-config.) if [ -f /usr/include/ncursesw/ncurses.h ]; then - echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncursesw\" - echo libs=\"-lncursesw -lmenuw -lpanelw\" + echo -D_GNU_SOURCE -I/usr/include/ncursesw > ${cflags} + echo -lncursesw -lmenuw -lpanelw > ${libs} exit 0 fi if [ -f /usr/include/ncurses/ncurses.h ]; then - echo cflags=\"-D_GNU_SOURCE -I/usr/include/ncurses\" - echo libs=\"-lncurses -lmenu -lpanel\" + echo -D_GNU_SOURCE -I/usr/include/ncurses > ${cflags} + echo -lncurses -lmenu -lpanel > ${libs} exit 0 fi if [ -f /usr/include/ncurses.h ]; then - echo cflags=\"-D_GNU_SOURCE\" - echo libs=\"-lncurses -lmenu -lpanel\" + echo -D_GNU_SOURCE > ${cflags} + echo -lncurses -lmenu -lpanel > ${libs} exit 0 fi diff --git a/scripts/kconfig/qconf-cfg.sh b/scripts/kconfig/qconf-cfg.sh index ad652cb53947..117f36e568fc 100755 --- a/scripts/kconfig/qconf-cfg.sh +++ b/scripts/kconfig/qconf-cfg.sh @@ -1,6 +1,10 @@ #!/bin/sh # SPDX-License-Identifier: GPL-2.0 +cflags=$1 +libs=$2 +bin=$3 + PKG="Qt5Core Qt5Gui Qt5Widgets" if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then @@ -11,9 +15,9 @@ if [ -z "$(command -v ${HOSTPKG_CONFIG})" ]; then fi if ${HOSTPKG_CONFIG} --exists $PKG; then - echo cflags=\"-std=c++11 -fPIC $(${HOSTPKG_CONFIG} --cflags $PKG)\" - echo libs=\"$(${HOSTPKG_CONFIG} --libs $PKG)\" - echo moc=\"$(${HOSTPKG_CONFIG} --variable=host_bins Qt5Core)/moc\" + ${HOSTPKG_CONFIG} --cflags ${PKG} > ${cflags} + ${HOSTPKG_CONFIG} --libs ${PKG} > ${libs} + ${HOSTPKG_CONFIG} --variable=host_bins Qt5Core > ${bin} exit 0 fi diff --git a/scripts/remove-stale-files b/scripts/remove-stale-files index ccadfa3afb2b..64b14aa5aebf 100755 --- a/scripts/remove-stale-files +++ b/scripts/remove-stale-files @@ -47,3 +47,5 @@ rm -f arch/riscv/purgatory/kexec-purgatory.c rm -f scripts/extract-cert rm -f arch/x86/purgatory/kexec-purgatory.c + +rm -f scripts/kconfig/[gmnq]conf-cfg -- 2.34.1
Powered by blists - more mailing lists