lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20221127203034.54092-2-krzysztof.kozlowski@linaro.org>
Date:   Sun, 27 Nov 2022 21:30:34 +0100
From:   Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To:     BenoƮt Cousson <bcousson@...libre.com>,
        Tony Lindgren <tony@...mide.com>,
        Rob Herring <robh+dt@...nel.org>,
        Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
        linux-omap@...r.kernel.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Cc:     Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v2 2/2] ARM: dts: omap: echo: use preferred enable-gpios for LP5523 LED

The preferred name suffix for properties with single and multiple GPIOs
is "gpios".  Linux GPIO core code supports both.  Bindings are going to
expect the "gpios" one:

  omap3-echo.dtb: lp5523A@32: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>

---

Changes since v1:
1. Drop old fix for n900 and correct instead Echo board (Sebastian)
---
 arch/arm/boot/dts/omap3-echo.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/omap3-echo.dts b/arch/arm/boot/dts/omap3-echo.dts
index 8f02ff5e7da6..06d2377d28ad 100644
--- a/arch/arm/boot/dts/omap3-echo.dts
+++ b/arch/arm/boot/dts/omap3-echo.dts
@@ -146,7 +146,7 @@ lp5523A: lp5523A@32 {
 		label = "q1";
 		reg = <0x32>;
 		clock-mode = /bits/ 8 <0>; /* LP55XX_CLOCK_AUTO */
-		enable-gpio = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
+		enable-gpios = <&gpio4 13 GPIO_ACTIVE_HIGH>; /* GPIO_109 */
 
 		multi-led@0 {
 			#address-cells = <1>;
-- 
2.34.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ