| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 27 Nov 2022 21:32:38 +0100
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Andy Gross <agross@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konrad.dybcio@...aro.org>,
Rob Herring <robh+dt@...nel.org>,
Krzysztof Kozlowski <krzysztof.kozlowski+dt@...aro.org>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: [PATCH v2 1/3] arm64: dts: qcom: msm8996-xiaomi-gemini: use preferred enable-gpios for LP5562 LED
The preferred name suffix for properties with single and multiple GPIOs
is "gpios". Linux GPIO core code supports both. Bindings are going to
expect the "gpios" one:
qcom/msm8996-xiaomi-gemini.dtb: lp5562@30: 'enable-gpio' does not match any of the regexes: '^led@[0-8]$', '^multi-led@[0-8]$', 'pinctrl-[0-9]+'
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
---
Changes since v1:
1. New patch
---
arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
index d8734913482f..dbd5f7e2df65 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-gemini.dts
@@ -54,7 +54,7 @@ lp5562@30 {
reg = <0x30>;
#address-cells = <1>;
#size-cells = <0>;
- enable-gpio = <&pm8994_gpios 7 1>;
+ enable-gpios = <&pm8994_gpios 7 1>;
clock-mode = /bits/8 <2>;
label = "button-backlight";
--
2.34.1
Powered by blists - more mailing lists